TEMIC Manuals

File format: PDF Size:183 KB

This document describes the features and characteristics of the Qualpack TSS463/TSS461C VAN controllers, including the serial interface and chip manufacturing process.

File format: PDF Size:306 KB

The U2896B is a modulation PLL for GSM, DCS, and PCS systems. It is realized using TEMIC's advanced silicon bipolar UHF5S technology and integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The U2896B is designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying transmitter architecture at which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2896B exhibits low power consumption and broadband operation for high flexibility in multi-band frequency mappings. The IC is available in a shrinked small-outline 36-pin package (SSO36).

File format: PDF Size:580 KB

The U2896B is a monolithic integrated circuit manufactured using TEMIC Semiconductors’ advanced silicon bipolar UHF5S technology. The device integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The U2896B is designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying a transmitter architecture at which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2896B exhibits low power consumption. Broadband operation provides high flexibility for multi-band frequency mappings. The IC is available in a shrinked small-outline 36-pin package (SSO36). Electrostatic sensitive device. Observe precautions for handling.

File format: PDF Size:212 KB

The U2895B is a monolithic integrated circuit designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying a transmitter architecture at which the VCO operates at the TX output frequency. It has low power consumption, high flexibility and small package.

File format: PDF Size:804 KB

This document describes the features and characteristics of the U2894B monolithic integrated circuit (IC). The IC is designed for cellular phones such as GSM900, DCS1800, and PCS1900. It integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The IC uses a transmitter architecture in which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2894B exhibits low power consumption. Broadband operation gives you high flexibility for multi-band frequency mappings. The IC is available in a shrinked small-outline 28-pin package (SSO28). The U2893B offers the same functionality with other divider ratios. This IC is an electrostatic sensitive device. Observe precautions for handling.

File format: PDF Size:794 KB

The U2893B is a monolithic integrated circuit realized using TEMIC's advanced silicon bipolar UHF5S technology. It integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous-programmable dividers, and a charge pump. The U2893B is designed for cellular phones such as GSM, DCS1800, and PCS1900, applying a transmitter architecture where the VCO is operated at the TX output frequency. The U2893B exhibits low power consumption, and the power-down function extends battery life.

File format: PDF Size:285 KB

The M44C260/M48C260 is a family of 4-bit single chip microcontrollers from Temic Germany, M44C260 is a ROM type and M48C260 is an EEPROM programmable type, the main features include a 4-bit HARVARD architecture, 1µs instruction cycle, 4K 8-bit application program memory, 256 4-bit RAM, 16 8-bit EEPROM, 16 bidirectional I/O, 8 hard and software interrupt levels, 2 8-bit multifunction timers/counters and 32kHz on-chip oscillator.

File format: PDF Size:568 KB

The content of this document is from a PDF file, but no specific product information is provided.

File format: PDF Size:168 KB

The document describes the features and characteristics of BUD600 TELEFUNKEN Semiconductors, including SWOT technology, high-speed technology, planar passivation, low switching losses, low dynamic saturation, etc. It is suitable for applications such as electronic lamp ballast circuits and switch-mode power supplies.

File format: PDF Size:161 KB

The TS80C52X2 is a high performance CMOS ROM, OTP, EPROM and ROMless versions of the 80C51 CMOS single chip 8-bit microcontroller. It retains all features of the TEMIC 80C51 with extended ROM/EPROM capacity (8 Kbytes), 256 bytes of internal RAM, a 6-source , 4-level interrupt system, an on-chip oscilator and three timer/ counters. In addition, the TS80C52X2 has a dual data pointer, a more versatile serial channel that facilitates multiprocessor communication (EUART) and a X2 speed improvement mechanism. The fully static design of the TS80C52X2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data. The TS80C52X2 has 2 software-selectable modes of reduced activity for further reduction in power consumption. In the idle mode the CPU is frozen while the timers, the serial port and the interrupt system are still operating. In the power-down mode the RAM is saved and all other functions are inoperative.

File format: PDF Size:256 KB

TEMIC TS80C31X2 is a high-performance CMOS and ROMless version of the 80C51 CMOS single chip 8-bit microcontroller. The TS80C31X2 retains all features of the TEMIC TSC80C31 with 128 bytes of internal RAM, a 5-source, 4 priority level interrupt system, an on-chip oscillator, and two timer/counters. In addition, the TS80C31X2 has a dual data pointer, a more versatile serial channel that facilitates multiprocessor communication (EUART), and an X2 speed improvement mechanism. The fully static design of the TS80C31X2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data. The TS80C31X2 has 2 software-selectable modes of reduced activity for further reduction in power consumption. In the idle mode, the CPU is frozen while the timers, the serial port, and the interrupt system are still operating. In the power-down mode, the RAM is saved and all other functions are inoperative.

File format: PDF Size:288 KB

This document is about the TSC80C31 supplier information query service, which provides the features and characteristics of the product.

File format: PDF Size:939 KB

The U208B is an open loop phase control circuit manufactured by TELEFUNKEN Semiconductors. It has internal supply voltage monitoring, automatic retriggering, triggering pulse, and internal current and voltage synchronization. It is recommended as a low cost open-loop control.

File format: PDF Size:86 KB

Introduction to U4090B's functions and features, including microphone amplifier, earphone amplifier, ear protection, audio interface, audio switch, line detection circuit, audio amplifier, etc.

File format: PDF Size:673 KB

TELEFUNKEN Semiconductors U209B3/ U209B3-FP is a phase control circuit designed for tacho applications. This integrated circuit offers significant cost and space savings as well as increased reliability due to its integration of multiple functions. It provides designers with a wide range of options for regulators and switching characteristics.

File format: PDF Size:187 KB

The U2010B is a phase-control circuit designed in bipolar technology. It enables load-current detection and has a soft-start function as well as reference voltage output. Motor control with load-current feedback and overload protection are preferred applications.

File format: PDF Size:202 KB

The U2043B is an integrated circuit used in relay controlled automotive flashers where a high EMC level is required. A lamp outage is indicated by frequency doubling during hazard mode as well as direction mode. The pilot lamp can be connected either to VBatt or GND. It features temperature and voltage compensated frequency, warning indication of lamp failure by means of frequency doubling, minimum lamp load for flasher operation, relay output with high current carrying capacity and low saturation voltage, and low susceptibility to EMI.

File format: PDF Size:134 KB

This is a PDF file. It does not contain any product information.

File format: PDF Size:134 KB

The document provides information about the U2044B supplier, but does not provide specific product features and characteristics.

File format: PDF Size:190 KB