ANALOG Manuals

The AD10678 is a 16-bit, 80 MSPS analog-to-digital converter for applications that demand increased SNR levels. Exceptional noise performance and a typical signal-to-noise ratio of 80 dBFS are obtained by digitally programmed gain control, and multiple digital output formats are provided.

File format: PDF Size:663 KB

AD10677 is a 16-bit high performance analog-to-digital converter for applications that demand increased SNR levels.

File format: PDF Size:633 KB

This document is the technical manual for AD10465. AD10465 is a dual-channel, 14-bit, 65 MSPS A/D converter with analog input signal conditioning features. The features of AD10465 include: dual-channel, 65 MSPS minimum sample rate; channel-to-channel matching, ±0.5% gain error; channel-to-channel isolation, >90 dB; DC-coupled analog input signal conditioning; selectable bipolar input voltage range (-0.5 V, -1.0 V, -2.0 V); gain flatness up to 25 MHz: <0.2 dB; 80 dB spurious-free dynamic range; two's complement output format; 3.3 V or 5 V CMOS-compatible output levels; 1.75 W per channel; industrial and military grade.

File format: PDF Size:2425 KB

AD10265 is a dual channel, 12-bit, 65 MSPS A/D converter with analog input signal conditioning

File format: PDF Size:278 KB

AD10242 is a product manufactured by Analog Devices, which features two matched ADCs and input signal conditioning. It has selectable bipolar input voltage range and is fully compliant with MIL-STD-883B. The product is suitable for radar processing, communications receivers, FLIR processing, secure communications, and any I/Q signal processing application.

File format: PDF Size:260 KB

AD10226 is a dual-channel, 12-bit, 125 MSPS IF sampling A/D converter from Analog Devices.

File format: PDF Size:970 KB

This is a datasheet for AD10201, a 12-bit ADC

File format: PDF Size:890 KB

AD10200 is a dual channel, 12-bit, 105 MSPS IF sampling A/D converter with analog input signal conditioning produced by Analog Devices.

File format: PDF Size:1667 KB

File format: PDF Size:0 KB

AD9221/AD9223/AD9220 are a family of 12-bit 1.5/3.0/10.0 MSPS monolithic analog-to-digital converters from Analog Devices. The product features low power consumption, high precision and is suitable for communication systems.

File format: PDF Size:357 KB

This product is a quad 10-bit, 40/65 MSPS serial LVDS 1.8 V A/D converter

File format: PDF Size:1153 KB

The AD9216 is a dual, 3 V, 10-bit, 65/80/105 MSPS analog-to-digital converter. It features dual high performance sample-and hold amplifiers, low power and programmable data format.

File format: PDF Size:263 KB

The AD9215 is a 10-bit, 65/80/105 MSPS, 3 V A/D converter from Analog Devices. It features single 3 V supply operation, SNR = 58 dBc (to Nyquist), SFDR = 77 dBc (to Nyquist), low power ADC core, differential input, 300 MHz bandwidth, On-chip reference and sample-and-hold amplifier, DNL = ±0.25 LSB, flexible analog input, offset binary or twos complement data format, clock duty cycle stabilizer, and is used in ultrasound equipment, IF sampling in communications receivers, battery-powered instruments, hand-held scopemeters, and low cost digital oscilloscopes.

File format: PDF Size:1044 KB

This document introduces the AD9214 10-bit, 65/80/105 MSPS 3 V A/D converter's features, including conversion rate, power consumption, dynamic range, sampling bandwidth, reference voltage, input range, and data format.

File format: PDF Size:1044 KB

The AD9203 is a monolithic low power, single supply, 10-bit, 40 MSPS analog-to-digital converter, with an on-chip voltage reference. The AD9203 uses a multistage differential pipeline architecture and guarantees no missing codes over the full operating temperature range. Its input range may be adjusted.

File format: PDF Size:221 KB

The AD9202 is a monolithic, single supply, 10-bit, 32 MSPS analog-to-digital converter with an on-chip sample-and-hold amplifier and voltage reference. It uses a multistage differential pipeline architecture at 32 MSPS data rates and features low power consumption, three-state outputs, and an out-of-range indicator.

File format: PDF Size:348 KB

The AD9201 is a complete dual channel, 20 MSPS, 10-bit CMOS ADC. It is optimized specifically for applications where close matching between two ADCs is required (e.g., I/Q channels in communications applications). The 20 MHz sampling rate and wide input bandwidth will cover both na...

File format: PDF Size:443 KB

The AD9200 is a monolithic, single supply, 10-bit, 20 MSPS analog-to-digital converter with an on-chip sample-and-hold amplifier and voltage reference. The AD9200 uses a multistage differential pipeline architecture at 20 MSPS data rates and guarantees 0.5 LSB of differential nonlinearity.

File format: PDF Size:344 KB

The AD9071 is a monolithic sampling analog-to-digital converter with an on-chip track-and-hold circuit and TTL/CMOS digital interfaces. The product operates at a 100 MSPS conversion rate with outstanding dynamic performance over its full operating range. The ADC requires only a single 5 V supply and an encode clock for full performance operation. The digital outputs are TTL compatible. Separate output power supplies are not required.

File format: PDF Size:168 KB

The AD9070 is a monolithic sampling analog-to-digital converter with an on-chip track-and-hold circuit and ECL digital interfaces. The product operates at a 100 MSPS conversion rate with outstanding dynamic performance over its full operating range. The ADC requires only a single –5 V supply.

File format: PDF Size:260 KB