ANALOG Manuals

The AD8369 is a digitally controlled variable gain amplifier with a frequency range from LF to 600 MHz and a gain range from -5 dB to +40 dB. It features 0.2 dB flatness and a 4-bit parallel or 3-wire serial interface. This product is suitable for applications such as cellular/PCS base stations, IF sampling receivers, fixed wireless access, wireline modems, and instrumentation.

File format: PDF Size:725 KB

The AD8327 is a low-cost, digitally controlled 5 V CATV line driver that supports the DOCSIS standard and provides gain programmability in 6.02 dB steps over a 48.16 dB range. The AD8327 features low distortion, low output noise, maintains 75 Ω output impedance, and supports SPI interfaces. It is ideal for applications that require gain-programmable line drivers.

File format: PDF Size:287 KB

The AD8326 is a high output power programmable CATV line driver that supports the DOCSIS standard for reverse path transmission. The gain can be programmed in 0.75 dB steps over a range of 53.5 dB. It has low distortion at the output, with SFDR values of -62 dBc at 21 MHz and -58 dBc at 65 MHz. The device also features a 1 dB compression of 25 dBm at 10 MHz, low output noise level of -45 dBmV in 160 kHz, and maintains a 75 ohm output impedance.

File format: PDF Size:454 KB

The AD8325 is a low-cost, digitally controlled, variable gain amplifier optimized for coaxial line driving applications such as cable modems that are designed to the MCNS-DOCSIS upstream standard.

File format: PDF Size:680 KB

This datasheet provides detailed information on the features of the AD8322, including support for the DOCSIS standard for reverse path transmission gain, programmable in 6 dB steps over a 42 dB range, low distortion, low noise, maintains 75 ohms output impedance, 180 MHz bandwidth, 5 V supply and support for SPI interfaces.

File format: PDF Size:235 KB

AD8323 is a low-cost, digitally controlled variable gain block that supports DOCSIS standard for reverse path transmission. It has a gain that can be programmed in 0.75 dB steps over a range of 53.5 dB, low distortion and output noise level -48 dBmV. It maintains a 75 ohm output impedance and supports SPI interfaces.

File format: PDF Size:264 KB

The AD8321 is a low cost digitally controlled variable gain amplifier optimized for coaxial line driving applications such as cable modems that are designed to the DOCSIS* (upstream) standard.

File format: PDF Size:645 KB

The document describes the ADL5604 RF driver amplifier, which operates in the frequency range of 700 MHz to 2700 MHz. It features a gain of 12.2 dB, OIP3 of 42.2 dBm, P1dB of 29.1 dBm, and a noise figure of 4.6 dB.

File format: PDF Size:610 KB

File format: PDF Size:0 KB

The AD8396 is a low power, high output current, dual-port ADSL/ADSL2+ line driver ideal for use as ADSL/ADSL2+ dual-channel Central Office (CO) line drivers.

File format: PDF Size:91 KB

The ADA4311-1 is a low-cost, dual, high current output line driver with shutdown. The product features high speed, wide output swing, low distortion, high output current, power management and shutdown functions, and is suitable for applications such as home networking line drivers, twisted pair line drivers, power line communications (PLC), video line drivers, ARB line drivers, and I/Q channel amplifiers.

File format: PDF Size:337 KB

AD8392A is a low power, high output current quad op amp, ideal for use as an ADSL/ADSL2+ dual-channel central office (CO) line driver. It features four current feedback, high current amplifiers, low power operation, three active power modes plus shutdown, high output voltage and current drive, and high speed performance. The AD8392AACP also has additional functionality including on-chip common-mode voltage generation.

File format: PDF Size:516 KB

The ADA4310-1 is a low cost, dual high current output line driver with shutdown. It features high bandwidth, high output current, low distortion, and is suitable for applications such as home networking line drivers, twisted pair line drivers, power line communications, video line drivers, ARB line drivers, and I/Q channel amplifiers.

File format: PDF Size:333 KB

The AD45048 is a dual operational amplifier from Analog Devices that can drive high output current (230 mA) and features a rail-to-rail output.

File format: PDF Size:154 KB

The AD8133 is a triple high speed fully differential driver from Analog Devices. It features a 225 MHz -3 dB large signal bandwidth, an adjustable output common-mode voltage, and a low distortion of 64 dB SFDR @ 10 MHz on 5 V supply. It is suitable for applications such as KVM networking and UTP networking.

File format: PDF Size:408 KB

AD8134 is a triple differential driver from Analog Devices with sync-on-common-mode circuitry. It features a bandwidth of up to 225MHz and an output voltage swing of 1.4V p-p. It is suitable for video signal transmission and other applications.

File format: PDF Size:445 KB

The AD8131 is a low-cost, high-speed differential driver. It features a high speed of 400 MHz, -3 dB full power bandwidth, 2000 V/μs slew rate, and a fixed gain of 2.

File format: PDF Size:369 KB

AD8145 is a high speed triple differential receiver with comparator functions from Analog Devices.

File format: PDF Size:563 KB

The AD8143 is a high-speed, triple differential receiver with comparators. It features high speed bandwidth, high common mode rejection ratio, wide input impedance, adjustable gain, etc.

File format: PDF Size:561 KB

AD8129/AD8130 are high performance, low cost, 270MHz differential receiver amplifiers. It features high conversion rate, high common-mode rejection ratio, high input impedance, low noise, low distortion and user-adjustable gain.

File format: PDF Size:773 KB