ANALOG Manuals

File format: PDF Size:0 KB

File format: PDF Size:0 KB

The AD421 is a single chip, high performance, low cost solution for generating 4 mA to 20 mA signals for smart industrial control transmitters.

File format: PDF Size:172 KB

AD7836 is a quad 14-bit DAC with voltage outputs. It supports separate offset adjust for each output, reference range of ±5 V, maximum output voltage range of ±10 V, clear function to user-defined code, and 44-pin MQFP package.

File format: PDF Size:175 KB

The AD9762 is a 12-bit resolution member of the TxDAC series of high performance differential analog-to-digital converters. It features 125 MSPS update rate, a bandwidth of 70 dBc at 5 MHz output frequency. It is single supply, low power, and small package. It is suitable for applications such as base stations, ADSL/HFC modems, direct digital synthesis (DDS), etc.

File format: PDF Size:423 KB

AD9760 is a 10-bit resolution member of the TxDAC series of high performance, low power CMOS digital-to-analog converters (DACs).

File format: PDF Size:409 KB

The AD9708 is the 8-bit resolution member of the TxDAC series of high performance, low power CMOS digital-to-analog converters (DACs). The TxDAC family provides high resolution, low power, high update rate, and low noise performance, making it an ideal choice for communications, signal reconstruction, and instrumentation applications.

File format: PDF Size:244 KB

AD7303 is a dual 8-bit serial input, dual voltage output DAC from Analog Devices. It is available in 8-pin DIP/SOIC and microSOIC packages, and operates from a single +2.7 V to +5.5 V supply. It has an internal reference voltage, individual DAC power-down function, and supports QSPI™, SPI™ and Microwire™ three-wire serial interface. It also has an on-chip output buffer, supports rail-to-rail output, and has low power consumption, with a typical operating current of 2.3 mA and a full power-down current of 1µA. It is suitable for applications such as portable battery powered instruments, digital gain and offset adjustment, programmable voltage and current sources, and programmable attenuators.

File format: PDF Size:362 KB

The AD7801 is a single, 8-bit, voltage output Digital-to-Analog Converter (DAC) that operates from a single +2.7 V to +5.5 V supply. It has a parallel microprocessor and DSP compatible interface with high-speed registers and double buffering. The AD7801 has internal and external reference voltage capability, DAC power-down function, parallel interface, and on-chip output buffer allowing rail-to-rail operation. It is suitable for portable battery-powered instruments, digital gain and offset adjustment, programmable voltage and current sources, programmable attenuators, and other applications.

File format: PDF Size:220 KB

The AD7392/AD7393 is a set of pin-compatible 10-/12-bit voltage output, digital-to-analog converters, designed to operate from a single 3 V supply. Built using a CBCMOS process, these monolithic DACs offer low cost and ease of use in single-supply 3 V systems. Operation is guaranteed over the 2.7 V to 5.5 V supply range.

File format: PDF Size:452 KB

The AD7390/AD7391 is a 3V serial-input micropower 10-bit and 12-bit DAC. It features micropower consumption, single-supply operation, and compact package, making it suitable for automotive, portable communications, and digitally controlled calibration applications.

File format: PDF Size:199 KB

The AD7302 is a dual, 8-bit voltage out DAC that operates from a single +2.7 V to +5.5 V supply. Its on-chip precision output buffers allow the DAC outputs to swing rail to rail. The AD7302 has features such as parallel microprocessor interface, low power operation, internal and external reference capability, and DAC power-down function.

File format: PDF Size:293 KB

This document describes the Analog Devices AD9764, a 14-bit, 125 MSPS TxDAC® D/A converter. It features a high update rate, resolution, and dynamic range, making it suitable for communication transmit channels and instrumentation.

File format: PDF Size:309 KB

The AD9761 is a complete dual-channel, high speed, 10-bit CMOS DAC. The AD9761 has been developed specifically for use in wide bandwidth communication applications (e.g., ...).

File format: PDF Size:970 KB

AD9774 is a single supply, oversampling, 14-bit digital-to-analog converter (DAC) optimized for waveform reconstruction applications requiring exceptional dynamic range.

File format: PDF Size:314 KB

The AD5320 is a single-channel 12-bit DAC chip with SOT-23 package. It operates at a voltage range of 2.7V to 5.5V and has a low power consumption of 140μA. The chip features Rail-to-Rail output and has functions such as micropower operation, power-down, and low power serial interface. It is suitable for applications such as portable battery-powered instruments, digital gain and offset adjustment, programmable voltage and current sources, and programmable attenuators.

File format: PDF Size:404 KB

The AD5310 is a single, 10-bit buffered voltage out DAC that operates from a single +2.7V to +5.5V power supply.

File format: PDF Size:165 KB

The AD5300 is an 8-bit DAC with a power supply range of 2.7 V to 5.5 V, operating current of 140 μA, and Rail-to-Rail output. It is available in SOT-23 package and features low power operation, single-chip design, power supply compensation, etc. It is suitable for portable battery-powered instruments, digital gain and offset adjustment, programmable voltage and current sources, programmable attenuators, and other applications.

File format: PDF Size:216 KB

The document describes the AD7394, a dual, 12-bit serial input DAC, which operates from a single 3V supply. It features micropower consumption, single-supply operation, high resolution, etc.

File format: PDF Size:276 KB

The AD7396/AD7397 is a dual channel 12-bit/10-bit DAC with a working voltage of 3V. It features micropower consumption, single supply operation, and a compact package.

File format: PDF Size:227 KB