Intersil Manuals

Key facts

Manuals

15

Last added

2012-06-11

Latest Intersil manuals

• inter'sil FSS913A0D FSS913A0R DATA SHEET

  The Intersil portfolio of SEGR resistant radiation hardened MOSFETs includes N-Channel and P-Channel devices in a variety of voltage, current and on-resistance ratings.

• INTER'SIL HM-65262/883 DATA SHEET

  This document describes the features and characteristics of a 204 TM March 1997 HM-65262/883 16K x 1 asynchronous CMOS static RAM, including fast access time, low standby current, low operating current, data retention, TTL compatible inputs and outputs, etc.

• inter'sil HIP4081A DATA SHEET

  The HIP4081A is a high frequency, medium voltage Full Bridge N-Channel FET driver IC, capable of driving every possible switch combination except those which would cause a shoot-through condition. It can switch at frequencies up to 1MHz and is well suited to driving Voice Coil Motors, high-frequency switching power amplifiers, and power supplies. The short propagation delays enable rapid, precise control of the driven load.

• INTER'SIL IH5043 DATA SHEET

  IH5043 is a dual SPDT CMOS analog switch produced by Intersil Corporation. It features high voltage, low power consumption and high reliability.

• inter'sil FSJ9160D FSJ9160R DATA SHEET

  The product is a MOSFET with 44A, -100V, rDS(ON) = 0.055Ω, 100K RAD (Si) features, suitable for military and civilian space applications, with enhanced single event effects (SEE) immunity

• inter'sil IRF250 DATA SHEET

  The IRF250 is an N-channel power MOSFET with a current rating of 30A and a voltage rating of 200V. It features a 0.085 Ohm on-state resistance, single pulse avalanche energy rating, nanosecond switching speeds, linear transfer characteristics, and high input impedance. It is designed for applications such as switching regulators, switching converters, motor drivers, relay drivers, and drivers for high power bipolar switching transistors requiring high speed and low gate drive power.

• inter'sil EL2244 EL2444 DATA SHEET

  EL2244 and EL2444 are dual and quad versions of the popular EL2044. They are high speed, low power, low cost monolithic operational amplifiers built on Elantec's proprietary complementary bipolar process. The EL2244 and EL2444 are unity-gain stable and feature a 325V/µs slew rate and 120MHz gain-bandwidth product while requiring only 5.2mA of supply current per amplifier. The power supply operating range of the EL2244 and EL2444 is from ±18V down to as little as ±2V. For single- supply operation, the EL2244 and EL2444 operate from 36V down to as little as 2.5V. The excellent power supply operating range of the EL2244 and EL2444 makes them an obvious choice for applications on a single +5V or +3V supply. The EL2244 and EL2444 also feature an extremely wide output voltage swing of ±13.6V with VS = ±15V and RL=1kΩ. At ±5V, output voltage swing is a wide ±3.8V with RL = 500Ω and ±3.2V with RL = 150Ω. Furthermore, for single-supply operation at +5V, output voltage swing is an excellent 0.3V to 3.8V with RL = 500Ω. At a gain of +1, the EL2244 and EL2444 have a -3dB bandwidth of 120MHz with a phase margin of 50°. Because of their conventional voltage-feedback topology, the EL2244 and EL2444 allow the use of reactive or non-linear elements in their feedback network. This versatility combined with low cost and 75mA of output-current drive make the EL2244 and EL2444 an ideal choice for price-sensitive applications.

• inter'sil HA-2505 DATA SHEET

  HA-2505 12MHz, High Input Impedance, Operational Amplifier is an operational amplifier produced by AD company, with excellent slew rate, bandwidth and settling time

• inter'sil HA-5134/883 DATA SHEET

  The HA-5134/883 is a precision quad operational amplifier that is pin compatible with the OP-400, LT1014, OP11, RM4156, and LM148 as well as the HA-4741/883. Each amplifier fea- tures guaranteed maximum values for offset voltage of 350µV, offset voltage drift of 2µV/oC (max), and offset current of 75nA over the full military temperature range while CMRR/PSRR is guaranteed greater than 94dB and open loop gain is guaran- teed above 500kV/V from -55oC to +125oC. Room temperature specifications exceed these values such as an offset voltage matching specification between channels of 200µV (max) at +25oC. Precision performance of the HA-5134/883 is enhanced by a noise voltage density of 7nV/√Hz at 1kHz (typ), noise current density of 2pA/√Hz at 1kHz and channel separation of 120dB (min). Each of the four unity gain stable amps on the quad are electrically isolated, having only supply lines in common and are fabricated using Dielectric Isolation to insure quality perfor- mance in the most demanding applications. The HA-5134/883 is ideal for compact circuits such as instru- mentation amplifiers, state-variable filters, and low level trans- ducer amplifiers. Other applications include pre...

• inter'sil X98027 DATA SHEET

  The X98027 is a 275MHz triple video digitizer with digital PLL from Intersil. It supports RGB and YUV formats, and provides high PSRR and dynamic performance to meet the stringent requirements of the graphics display industry.

• inter'sil AD590 DATA SHEET(1)(1)

  AD590 is an integrated circuit temperature transducer that produces an output current proportional to absolute temperature. It is a high impedance constant current regulator, passing 1μA/oK for supply voltages between +4V and +30V. AD590 can be used in any temperature-sensing application between -55°C to 150°C in which conventional electrical temperature sensors are currently employed. AD590's low cost, monolithic integrated circuit design and elimination of support circuitry make it an attractive alternative for many temperature measurement situations. AD590 does not need linearization circuitry, precision voltage amplifiers, resistance measuring circuitry and cold junction compensation in temperature measurement. AD590 can also be used for temperature compensation or correction.

• inter'sil AD590 DATA SHEET(1)

  This document describes the features and characteristics of TM January 2002 AD590 2-Wire, Current Output Temperature Transducer, including linear current output, wide temperature range, two-terminal device voltage in/current out, wide power supply range, and low cost.

• inter'sil ISL6612A ISL6613A DATA SHEET

  ISL6612A and ISL6613A are high frequency MOSFET drivers specifically designed to drive upper and lower power N-Channel MOSFETs in a synchronous rectified buck converter topology.

• inter'sil ISL6612B ISL6613B DATA SHEET

  ISL6612B, ISL6613B high frequency MOSFET drivers drive upper and lower power N-Channel MOSFETs, suitable for IBA systems DC/DC converters

• inter'sil ISL6614 DATA SHEET

  The ISL6614 integrates two ISL6613 MOSFET drivers and is specifically designed to drive two independent power channels in a Multi-Phase interleaved buck converter topology. These drivers combined with HIP63xx or ISL65xx Multi-Phase Buck PWM controllers and N-Channel MOSFETs form complete core-voltage regulator solutions for advanced microprocessors. The ISL6614 drives both the upper and lower gates simultaneously over a range from 5V to 12V. This drive voltage provides the flexibility necessary to optimize applications involving trade-offs between gate charge and conduction losses. An advanced adaptive zero shoot-through protection is integrated to prevent both the upper and lower MOSFETs from conducting simultaneously and to minimize the dead time. These products add an overvoltage protection feature operational before VCC exceeds its turn-on threshold, at which the PHASE node is connected to the gate of the low side MOSFET (LGATE). The output voltage of the converter is then limited by the threshold of the low side MOSF