Burr-Brown Manuals

The document describes the features and characteristics of a low noise precision differential field effect transistor operational amplifier.

PCM1600/PCM1601 are CMOS monolithic integrated circuits that feature six 24-bit audio digital-to-analog converters and support circuitry in either a LQFP-48 or MQFP-48 package. The digital-to-analog converters utilize Burr-Brown’s enhanced multi-level, delta-sigma architecture, which employ 4th-order noise shaping and 8-level amplitude quantization to achieve excellent signal-to-noise performance and a high tolerance to clock jitter. The PCM1600 and PCM1601 accept industry-standard audio data formats with 16- to 24-bit audio data. Sampling rates up to 100kHz are supported. A full set of user-programmable functions are accessible through a 4-wire serial control port which supports register write and readback functions.

The OPA358 is a high-performance, low-power, single-supply amplifier. It offers wide bandwidth, high gain, low distortion and is ideal for use in digital cameras, mobile phones, digital media players, video surveillance, optical power monitoring, and other applications.

The ADS5500 is a 14-bit, 125MSPS high-performance analog-to-digital converter (ADC) that includes a high-bandwidth linear sample-and-hold stage (S&H) and internal reference. The ADS5500 has excellent power consumption of 780mW at 3.3V single-supply voltage.

The REG710 is a switched capacitor voltage converter from Schneider Electric that produces a regulated, low-ripple output voltage from an unregulated input voltage. A wide-input supply voltage of 1.8V to 5.5V makes the REG710 ideal for a variety of battery sources, such as single cell Li-Ion, or two and three cell nickel- or alkaline-based chemistries. The input voltage may vary above and below the output voltage and the output will remain in regulation. It works equally well for step-up or step-down applications without the need for an inductor, providing low EMI DC/DC conversion. The high switching frequency allows the use of small capacitors, which reduces cost.

The REG1117 is a family of three-terminal voltage regulators that includes a variety of fixed- and adjustable-voltage versions, two currents (800mA and 1A) and two package types (SOT-223 and DDPAK).

The DAC1221 is a 16-bit low power digital-to-analog converter that offers 16-bit monotonic performance over the specified temperature range of -40°C to +85°C. It utilizes delta-sigma technology to achieve inherently linear performance in a small package at very low power. The output range is two times the external reference voltage. On-chip calibration circuitry dramatically reduces offset and gain errors. The DAC1221 features a synchronous serial interface. In single converter applications, the serial interface can be accomplished with just two wires, allowing low-cost isolation. For multiple converters, a CS signal allows for selection of the appropriate D/A converter. The DAC1221 has been designed for closed-loop control applications in the industrial process control market, and high resolution applications in the test and measurement market. It is also ideal for remote applications, battery-powered instruments, and isolated systems. The DAC1221 is available in a SSOP-16 package.

The document describes the features and characteristics of the PGA202/203 products, including programmable gains, low bias current, fast settling, and low non-linearity.

BUF602 is a closed-loop buffer from Texas Instruments. It features a wide bandwidth of 1000MHz, high output current and low static current. It is suitable for many applications such as clock distribution circuits, video/broadcast equipment, communication equipment, high-speed data acquisition equipment, etc.

The ADS1281 is an extremely high-performance, single-chip analog-to-digital converter (ADC) designed for the demanding needs of energy exploration and seismic monitoring environments. It features 130dB signal-to-noise ratio (SNR) (250SPS) and 127dB SNR (500SPS), as well as 0.6ppm input offset error (INL).

The OPA241 series and OPA251 series are specifically designed for battery powered, portable applications. In addition to very low power consumption (25µA), these amplifiers feature low offset voltage, rail-to-rail output swing, high common-mode rejection, and high open-loop gain.

The INA131 is a low cost, general purpose G = 100 instrumentation amplifier offering excellent accuracy. Its 3-op amp design and small size make it ideal for a wide range of applications. On-chip laser trimmed resistors accurately set a fixed gain of 100. The INA131 is laser trimmed to achieve very low offset voltage (50µV max), drift (0.25µV/°C max), and high CMR (110dB min). Internal input protection can withstand up to ±40V inputs without damage. The INA131 is available in a 8-pin plastic DIP. They are specified over the –40°C to +85°C temperature range.