ATMEL Manuals

The document describes the features and characteristics of the AT24C32A/64A products, including low-voltage and standard-voltage operation, low-power devices, internally organized 4096 x 8, 8192 x 8, two-wire serial interface, Schmitt trigger, bidirectional data transfer protocol, etc.

This document introduces the features and characteristics of AT6000 series SRAM-based field programmable gate arrays (FPGAs), including high performance, low power consumption, programmable clock options, and independently configurable I/O.

AT76C111 is a low-power digital camera control chip that integrates DSP and video encoder, supports SDRAM and various storage cards, and can be widely used in consumer digital cameras, portable digital camcorders, industrial vision systems, etc.

The document describes a multichip module containing a field-programmable system-level integrated circuit (FPSLIC™) and secure configuration EEPROM memory. The product features 512 Kbits to 1 Mbit of configuration memory with security protection and in-system programming (ISP). The FPSLIC is an SRAM-based FPGA with an embedded high-performance RISC AVR® core and extensive data and instruction SRAM. It also includes a patented SRAM-based AT40K FPGA with 5,000 to 40,000 gates and FreeRAM™ feature, making it ideal for dynamically reconfigurable and low-power applications. The product utilizes a patented AVR enhanced RISC architecture with 120+ powerful instructions, most of which can be executed in a single clock cycle. It also includes a high-performance hardware multiplier for DSP-based systems and achieves close to 1 MIPS per MHz performance. The product offers up to 36 Kbytes of dynamically allocated instruction and data SRAM, as well as JTAG interface for extensive on-chip debugging support.

The ATF20V8B is a high performance CMOS (Electrically Erasable) Programmable Logic Device (PLD) that utilizes Atmel's proven electrically erasable Flash memory technology. Speeds down to 7.5 ns and power dissipation as low as 10 mA are offered. All speed ranges are specified over the full 5V ± 10% range for industrial temperature ranges, and 5V ± 5% range for commercial temperature ranges.

The document introduces a new type of programmable logic device with features such as high-density replacement for discrete logic, high-speed, and low power consumption. The device has 42 inputs and 20 sum terms, providing increased logic flexibility. The output logic is flexible, with 20 flip-flops that can be individually buried or directly output. Multiple feedback paths are available for buried state machines and I/O bus compatibility. The device is reprogrammable and uses a reliable high-speed CMOS EPROM process. It is available in 24-pin and 28-pin packages.

7663B-8051 is an MCU with 80C52 compatibility and 8051 instruction compatibility, featuring six 8-bit I/O ports, three 16-bit timers/counters, 256 bytes of scratch pad RAM, 11 interrupt sources with 4 priority levels. The chip uses standard VCC power supply, integrated power monitor (POR/PFD) to supervise internal power supply, and contains serial loader for in-system programming.

T2525 is a complete IR receiver for data communication developed and optimized for use in carrier-frequency-modulated transmission applications.

T89C51RD2 0 to 40MHz Flash Programmable 8-bit Microcontroller

The AT49BV160D(T) is a 2.7-volt 16-megabit Flash memory organized as 1,048,576 words of 16 bits each. The memory is divided into 39 sectors for erase operations. The device is offered in a 48-lead TSOP package. The device has CE and OE control signals to avoid any bus contention. This device can be read or reprogrammed using a single power supply, making it ideally suited for in-system programming. The device powers on in the read mode. Command sequences are used to place the device in other operation modes such as program and erase. The device has multiple sectors, each of which can be erased individually. The device also has multiple words, each of which can be programmed individually. The device has read, program, and erase pins that are used to control the device's various operation modes.

This document describes the features and characteristics of the AT49BV640D(T) product. The product is a 2.7-volt 32-megabit Flash memory organized as 4,194,304 words of 16 bits each. It features single voltage operation, fast word program time, and low-power operation.

The AT89S8253 is a low-power, high-performance CMOS 8-bit microcontroller with 12K bytes of In-System Programmable (ISP) Flash program memory and 2K bytes of EEPROM data memory.

The TS68EN360 QUad Integrated Communication Controller (QUICC) is a versatile one-chip integrated microprocessor and peripheral combination that can be used in a variety of controller applications. It particularly excels in communications activities. The QUICC can be described as a next-generation TS68302 with higher performance.

This document describes a product that is pin and software compatible with standard 80C51 products and 80C51Fx/Rx/Rx+. It can be used as a plug-in replacement for Intel's 8xC251Sx. The product features the C251 core, a 40-byte register file, registers accessible as bytes, words or dwords, a three-stage instruction pipeline, and a 16-bit internal code fetch. It also has an enriched C51 instruction set, a 16-bit and 32-bit ALU, compare and conditional jump instructions, an expanded set of move instructions, linear addressing, and 1KB of on-chip RAM. The external memory space is programmable from 64 kilobytes to 256 kilobytes. The product is available in different versions with on-chip EPROM/OTPROM or masked ROM, and there is also a ROMless version. It provides four 8-bit parallel I/O ports, a full duplex UART with independent baud rate generator, a synchronous serial link controller, TWI multi-master protocol, μWire and SPI master and slave protocols, three 16-bit timers/counters, an event and waveform controller, and compatibility with Intel's programmable counter array (PCA). The product has a common 16-bit timer/counter reference with four possible clock sources and five modules, each with four programmable modes, including software timer/counter and timer/counter functionality.