tyco Manuals
tyco KENDALL KANGAROO JOEY Enteral Feeding Pump Manual(1)
File format: PDF Size:9703 KB
tyco KENDALL KANGAROO JOEY Enteral Feeding Pump Manual
This document is an operation and service manual for kENDALL KANGAROO JOEY™ Enteral Feeding Pump. It contains information about the product's features, functions, and usage methods.
File format: PDF Size:9703 KB
tyco Electronics Voltage Variable Absorptive Attenuator 800 - 1000 MHz
Unable to parse the content of the document
File format: PDF Size:212 KB
tyco Electronics MT2 Relay handbook
The MT2 relay is a dry circuit, test access, ringing 2 pole telecom/signal relay from Tyco Electronics AXICOM. It is through hole type (THT), non-polarized, non-latching and has 1 coil.
File format: PDF Size:310 KB
tyco Electronics 75 Ohm Miniature BNC Series handbook
Mini BNC is a 75 Ohm miniature BNC series RF connector from Tyco Electronics that retains the characteristics that made the standard BNC so popular, but offers 40% more interconnects in the same area. The Mini BNC is an excellent fit for 75 Ohm systems, offering 500 mating cycles, electrical performance through 2 GHz, and is completely intermateable with competitive miniature BNC offerings.
File format: PDF Size:504 KB
Tyco Electronics BNC Connectors (50 ohm/75 ohm) Data Sheet
This document introduces the features and characteristics of BNC connectors, including connection methods, versions, compatibility, product features, etc.
File format: PDF Size:984 KB
TYCO EMC SERIES DATA SHEET
This document introduces the features and characteristics of CORCOM EMC series filters. This series of filters is a dual-stage filter with a maximum current rating of 30 amps. It has high performance and low cost, and is suitable for applications that require high performance.
File format: PDF Size:144 KB
TYCO MV SERIES DATA SHEET
The MV series answers the need for a medical filter to help equipment comply with increasing noise sources in medical applications while still meeting leakage current requirements of UL2601. Less strict than previous UL medical standards, UL2601 limits leakage current for patient care equipment. Due to the increased need for higher performance filtering, UL has allowed more leakage current than in previous standards. The MV takes advantage of this to offer improved line-to- ground performance in a moderately priced filter. Higher line-to-line performance is achieved through its additional differential mode rod inductors. Overall, the filter provides a good solution to emission and immunity problems, at a moderate cost, in a reasonable package size.
File format: PDF Size:394 KB
TYCO HT SERIES Datasheet
The HT series power line filters provide superior common- mode and premium differential-mode attenuation to RFI noise on the frequency range from 10kHz to 30MHz, for IEC 60601 and UL2601 patient-connected equipment, as well as all other electronic equipment that cannot tolerate leakage current. They are a size- and cost-effective solution to the problem of meeting both medical leakage current limits and conducted emissions limits in equipment with high noise sources (such as switching power supplies).
File format: PDF Size:129 KB
TYCO Q SERIES Datasheet(1)
CORCOM power line filters are designed to suppress switching power supply emissions down to 10 kHz.
File format: PDF Size:102 KB
TYCO K SERIES Datasheet(2)
CORCOM K Series RFI Power Line Filters are general purpose common-mode and differential-mode filters. They are effective in the control of line-to-line as well as line-to-ground RFI interference. The K series RFI filters are particularly suited in applications where pulsed, continuous and/or intermittent RFI interference is present. The EK models meet the very low leakage current requirements of VDE portable equipment, and (120 Volt) UL544 non-patient medical equipment.
File format: PDF Size:372 KB
TYCO EMC SERIES Datasheet(1)
CORCOM Product Guide is about Compact and Cost Effective Dual Stage RFI Power Line Filters. This series of RFI filters has been developed to reduce conducted noise to acceptable limits for equipment that must comply with the requirements of CISPR in Europe and the FCC specifications in the USA. The EMC series is the most compact dual stage filter available from Tyco Electronics. This cost effective design has a maximum current rating of 30 amps; higher than any similar catalog product. The EMC series was designed to address the need for more differential mode attenuation in the lower frequency range while still maintaining high common mode performance. This type of performance is typically needed for motor drives and switch mode power supplies with increased operating frequencies. The EMC series is ideal for applications that require a high level of performance in a compact, cost effective package.
File format: PDF Size:144 KB
TYCO AYO SERIES DATA SHEET
The document provides specifications and characteristics of lower current three-phase RFI filters in the CORCOM product series, including maximum leakage current, hipot rating, operating frequency, rated voltage, and current.
File format: PDF Size:44 KB
TYCO T SERIES DATA SHEET
File format: PDF Size:0 KB
TYCO EP/VP SERIES DATA SHEET
The product is a power line filter that is used to suppress switching power supply noise. It meets the requirements of CISPR in Europe and FCC specifications in the USA. It has high insertion loss and low leakage current.
File format: PDF Size:66 KB
TYCO B SERIES DATA SHEET
The product is CORCOM B series RFI power line filters, which are suitable for high impedance loads, low cost, small size and high efficiency RFI control of line-to-ground noise.
File format: PDF Size:55 KB
TYCO H SERIES DATA SHEET
The H series filters were developed specifically for health care applications. These products are suitable for uses in both patient care equipment and non-patient care equipment. Their extremely low leakage current allows compliance with UL2601 and CSA 22.2 health care specifications.
File format: PDF Size:70 KB
TYCO EMC SERIES Datasheet
The EMC series of RFI filters has been developed to reduce conducted noise to acceptable limits for equipment that must comply with the requirements of CISPR in Europe and the FCC specifications in the USA. The EMC series is the most compact dual stage filter available from Tyco Electronics. This cost effective design has a maximum current rating of 30 amps; higher than any similar catalog product. The EMC series was designed to address the need for more differential mode attenuation in the lower frequency range while still maintaining high common mode performance. This type of performance is typically needed for motor drives and switch mode power supplies with increased operating frequencies. The EMC series is ideal for applications that require a high level of performance in a compact, cost effective package.
File format: PDF Size:144 KB
TYCO K SERIES Datasheet(1)(1)
The K series RFI power line filters are general purpose common-mode and differential-mode filters. They are effective in the control of line-to-line as well as line-to- ground RFI interference. The K series RFI filters are particularly suited in applications where pulsed, continuous and/or intermittent RFI interference is present. The EK models meet the very low leakage current requirements of VDE portable equipment, and (120 Volt) UL544 non-patient medical equipment.
File format: PDF Size:476 KB