FUJITSU Manuals

MB91270/280 is a single chip microcontroller based on a 32-bit high-efficiency RISC CPU, which is used for building various I/O resources and bus control mechanisms to meet the needs of embedded control with high performance/high speed CPU processing. Because the vast address space that 32-bit CPU accesses is supported, the external bus access is basically. To speed up CPU instruction execution, MB91270/280 has built-in RAM of 16 Kbytes (for data) . It is best specification for the embedded usage in which efficient CPU processing power such as the digital video camera, navigation systems, and DVD players is demanded. The MB91270/280 series power-up the bus access based on FR30/40 family CPU, and is FR60 Lite family corresponding to use at high speed.

File format: PDF Size:1091 KB

This datasheet provides detailed information on MBM29PL160TD-75/-90/MBM29PL160BD-75/-90's features and functions, such as single 3.0 V read, program and erase, compatibility with JEDEC standard commands, compatibility with MASK ROM pinouts, minimum 100,000 program/erase cycles, high performance 25 ns maximum page access time (75ns maximum random access time), 8 words page read mode function, sector erase architecture, embedded erase algorithms, embedded program algorithms, data polling and toggle bit feature, Ready/Busy output (RY/BY) hardware method, automatic sleep mode and low VCC write inhibit.

File format: PDF Size:592 KB

MB85RS256 is a 256K (32K × 8) bit SPI FRAM chip, using the ferroelectric process and silicon gate CMOS process technologies for forming the nonvolatile memory cells. It has high endurance and data retention capability, suitable for applications without the need for a backup battery.

File format: PDF Size:279 KB

The FBR160 Series Power Relay is a relay product from Omron. It uses 12 VDC or 24 VDC coils and has three current ratings of 3A, 5A and 10A. It can be used in home appliances and automotive electronics.

File format: PDF Size:53 KB

The MB90460 series is a line of general-purpose, Fujitsu 16-bit microcontrollers designed for process control applications which require high-speed real-time processing, such as consumer products. While inheriting the AT architecture of the F2MC* family, the instruction set for the F2MC-16LX CPU core of the MB90460 series incorporates additional instructions for high-level languages, supports extended addressing modes, and contains enhanced multiplication and division instructions as well as a substantial collection of improved bit manipulation instructions. In addition, the MB90460 has an on-chip 32-bit accumulator which enables processing of long-word data. The peripheral resources integrated in the MB90460 series include : an 8/10-bit A/D converter, UARTs (SCI) 0 to 1, 16-bit PPG timer, a multi-functional timer (16-bit free-run timer, input capture units (ICUs) 0 to 3, output compare units (OCUs) 0 and 5, 16-bit PPG timer, a waveform generator), a multi-pulse generator (16-bit PPG timer, 16-bit reload timer, waveform sequencer), PWC 0 to 1, 16-bit reload timer and DTP/external interrupt.

File format: PDF Size:827 KB

Am29SL800D 8 Megabit (1 M x 8-Bit/512 K x 16-Bit) CMOS 1.8 Volt-only Super Low Voltage Flash Memory is a super low voltage flash memory.

File format: PDF Size:1063 KB

The F5CP/F6CP series of SAW band pass filters have 2.5 mm × 2.0 mm × 0.9 mm (h) of ultra small package, which are available in the 700 to 2000 MHz frequency range. They exhibit high stability by using single crystal, Lithium Tantalate (LiTaO3) with a large electro-mechanical coefficient. Typical applications for the F5CP/F6CP series include RF interstage filtering in mobile communications systems. Standard devices are available for AMPS, GSM, EGSM, PDC800, PDC1.5G.

File format: PDF Size:141 KB

This datasheet is about MBM29PDS322TE/BE, which is a 32M-bit, 1.8 V-only Flash memory. It is organized as 2M words of 16 bits each. The device provides 63-ball FBGA package. The device is designed to be programmed in system with standard system 1.8 V VCC supply. Write or erase operations do not require 12.0 V VPP and 5.0 V VCC. The device can also be reprogrammed in standard EPROM programmers. The device is organized into two banks, Bank 1 and Bank 2, which can be considered to be two separate memory arrays as far as certain operations are concerned. This device is the same as Fujitsu's standard 1.8 V only Flash memories with the additional capability of allowing a normal non-delayed read access from a non-busy bank of the array while an embedded write (either a program or an erase) operation is simultaneously taking place on the other bank.

File format: PDF Size:230 KB

The Fujitsu MB15F74UV is a serial input Phase Locked Loop (PLL) frequency synthesizer with a 4000 MHz and a 2000 MHz prescalers. It uses the BiCMOS process, with a typical supply current of 9.0 mA at 3.0 V. The supply voltage range is from 2.7 V to 3.6 V. It features high frequency operation, low power supply voltage, ultra low power supply current, selectable charge pump current, and direct power saving function.

File format: PDF Size:232 KB

This document describes the features and characteristics of Fujitsu Semiconductor's flash memory storage product, including the use of 0.23μm process technology, support for simultaneous read/write operations, single 3.0V power supply, compatibility with JEDEC standard commands, and worldwide pinout compatibility.

File format: PDF Size:1007 KB

This is a user manual for Fujitsu-Siemens PC. It introduces common problems, frequently asked questions and solutions about the system

File format: PDF Size:4421 KB

This document specifies the Spansion memory products offered by both Advanced Micro Devices and Fujitsu. The features and characteristics of these products remain unchanged, and they will be available to customers of both companies. Existing part numbers starting with 'Am' and 'MBM' are still supported for ordering.

File format: PDF Size:1115 KB

The Am29F016D is a 16 megabit (2M x 8-bit) CMOS 5.0 Volt-only, Uniform Sector Flash Memory.

File format: PDF Size:1146 KB

Am29DL640G Data Sheet is a technology specification for a memory product released by AMD. This product has been retired and is not recommended for use.

File format: PDF Size:1175 KB

This document is about STARTERKIT MB91302 USER GUIDE user manual

File format: PDF Size:2166 KB

This document is the TM 20W user manual

File format: PDF Size:2259 KB

This document is the user manual for TM 14ADV, a 14 ppm page printer. It provides instructions for using the printer and includes the Federal Communications Commission's radio frequency interference statement. The printer complies with the limits for a Class B digital device according to Part 15 of the FCC Rules, offering reasonable protection against harmful interference in residential installations. If the equipment causes harmful interference to radio or television reception, the user is advised to try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment to a different circuit outlet than the receiver, or consulting a dealer or experienced radio/TV technician for assistance. FCC warning: Unauthorized changes or modifications may void the user's authority to operate the equipment.

File format: PDF Size:1731 KB

This data sheet provides detailed information on Fujitsu Flash Miniature Card MB98C81013/81123/81233/81333, including dimensions, supply voltage, program and erase functions, detection of completion of program/erase operation, etc.

File format: PDF Size:539 KB

This document is the hardware manual for the MB87J2120 and MB87P2020-A Lavender & Jasmine Color LCD/CRT/TV Controller produced by FUJITSU SEMICONDUCTOR. The document provides specifications and functional descriptions of the products.

File format: PDF Size:3393 KB

This is the user guide of Fujitsu Microelectronics Europe's MB91460 SERIES EVALUATION BOARD SK-91F467D-208PFV USER GUIDE, version is V1.1

File format: PDF Size:1647 KB