STMICROELECTRONICS Manuals

The P6SMBJ series 600W surface mount transient voltage suppressor features glass passivated die construction, 600W peak pulse power dissipation, 5.0V-170V standoff voltage, uni- and bi-directional versions available, excellent clamping capability, fast response time, plastic case material has UL flammability classification rating 94V-O, etc.

File format: PDF Size:80 KB

LD1117 series is a low dropout linear voltage regulator, providing 1.2 V, 1.8 V, 2.5 V, 2.85 V, 3.0 V, 3.3 V and 5.0 V multiple fixed output voltages, and also providing 1.25 V adjustable output voltage version. This device has high efficiency, high reliability and high stability, which is suitable for various electronic equipment.

File format: PDF Size:987 KB

File format: PDF Size:0 KB

The LM138/LM238/LM338 are adjustable 3-terminal positive voltage regulators capable of supplying in excess of 5A over a 1.2V to 32V output range. They have features such as adjustable output voltage, excellent load and line regulation, and good thermal stability.

File format: PDF Size:1626 KB

L98SI is an octal low side solenoid driver realized in Multipower-BCD technology particularly suited for driving lamps, relays and solenoids in industrial environment. The L98SI DMOS outputs have very low power consumption. Data is transmitted serially to the device using the Serial Peripheral Interface (SPI) protocol. The L98SI features the outputs status monitoring function.

File format: PDF Size:146 KB

The TS97x series operational amplifiers provide output rail-to-rail signal swing, very low noise level and ultra low distortion, and are ideally suited for portable and battery-supplied equipment, such as CD players, PDAs, portable communications equipment (cell phones, pagers), instrumentation and sensoring, and professional audio circuits.

File format: PDF Size:462 KB

This document describes the features and characteristics of STMicroelectronics' STS6NF20V N-CHANNEL 20V - 0.030 Ω - 6A SO-8 2.7V-DRIVE STripFET™ II POWER MOSFET.

File format: PDF Size:257 KB

TD352 is an advanced gate driver for IGBT and power MOSFET from ON Semiconductor, with features such as 1A sink / 0.75A source min. gate drive, active Miller clamp feature, desaturation detection, adjustable and accurate turn-on delay, UVLO protection and 2kV ESD protection.

File format: PDF Size:180 KB

L6565 is a current-mode primary controller IC, specifically designed to build offline Quasi-resonant ZVS (Zero Voltage Switching at switch turn-on) fly- back converters.

File format: PDF Size:245 KB

STN3NF06L is a N-channel 60V-0.07Ω-4A SOT-223 STripFET™ II power MOSFET from STMicroelectronics. It features a typical RDS(on)=0.07 Ω, exceptional dv/dt capability, rugged avalanche characteristics, 100% avalanche tested, and low threshold drive.

File format: PDF Size:266 KB

ST62T52C/T62C/E62C is an 8-bit OTP/EPROM MCU with A/D converter, safe reset, auto-reload timer and EEPROM.

File format: PDF Size:910 KB

This document describes the features and characteristics of the STS6PF30L P-CHANNEL 30V - 0.027 Ω - 6A SO-8 STripFET™ POWER MOSFET product, released on May 1, 2003. It includes low on-resistance, high packing density, rugged avalanche characteristics, and ease of automated surface mount assembly.

File format: PDF Size:296 KB

This document describes the general features and applications of the 2N7000 and 2N7002 N-CHANNEL 60V - 1.8Ω - 0.35A SOT23-3L - TO-92 STripFET™II MOSFET, released on April 1, 2005.

File format: PDF Size:375 KB

The L4975A is a 5A output current, 5.1V to 40V output voltage range, 0 to 90% duty cycle range step-down monolithic power switching regulator that has internal feed-forward line regulation, internal current limiting, precise 5.1V ± 2% on chip reference, reset and power fail functions, soft start, input/output sync pin, under voltage lock out with hysteretic turn-on, PWM latch for single pulse per PE-RIOD, very high efficiency, switching frequency up to 500KHz, thermal shutdown, continuous mode operation.

File format: PDF Size:6723 KB

This document describes the features and characteristics of the M95040, M95020, and M95010 serial SPI bus EEPROMs, including compatibility with the SPI bus serial interface, supply voltage range, high-speed clock rate, write time, status register, byte and page write functionality, self-timed programming cycle, adjustable size read-only EEPROM area, enhanced ESD protection, more than 1 million erase/write cycles, and more than 40-year data retention.

File format: PDF Size:587 KB

VIPer20/20A, made using VIPower M0 Technology, is a SMPS primary IC that combines an adjustable switching frequency (up to 200kHz), current mode control, soft start and shutdown control, automatic burst mode operation in standby condition able to meet 'blue angel' norm (<1W total power consumption), internally trimmed zener reference, undervoltage lock-out with hysteresis, integrated start-up supply, avalanche rugged, overtemperature protection, low standby current, and adjustable current limitation.

File format: PDF Size:477 KB

File format: PDF Size:0 KB

The TSH110 is a low noise, low supply current, high output current, bandwidth of 100MHz, supply voltage of 5V to 12V, slew rate of 450V/µs, specified for 100Ω load, very low distortion, tiny SOT23-5, TSSOP and SO packages operational amplifier.

File format: PDF Size:425 KB

M48T58 M48T58Y is a product that integrates ultra-low power SRAM, real-time clock, power-fail control circuit, and battery. It features byte-wide RAM-like clock access, BCD-coded year, month, day, date, hours, minutes, and seconds, frequency test output for real-time clock, and automatic power-fail chip deselect and write protection.

File format: PDF Size:386 KB

The TS461/2/4 is a family of low noise, low distortion, high dynamic range operational amplifiers that can operate with voltages as low as ±1.35V and to reach a minimum of ±2Vpp of output swing when supplied with ±2.5V.

File format: PDF Size:190 KB