ATMEL Manuals

The document introduces the features of the FX6805 floating-point calculator.

File format: PDF Size:1221 KB

The TS68332 is a 32-bit microcontroller that features low power and has a special STOP mode. It operates at 5V±10% supply and 20.97MHz, which is software programmable at 5V±5%. The device uses 1µ high density complementary metal oxide semiconductor (HCMOS) static design and 132-pin ceramic lead chip carrier (CERQUAD) and 132-pin ceramic pin grid array (PGA) package.

File format: PDF Size:1467 KB

TS68332 is a low-power 32-bit microcontroller, running at 16.78MHz, working voltage is 5V±10%, using 1µHCMOS process, using static design.

File format: PDF Size:1467 KB

File format: PDF Size:1467 KB

This document is a technical manual for the TS68000/TS68008 processor, which supports 16-bit or 8-bit, and has an independent direct memory access controller, interrupt controller, parallel input/output ports, 1152 bytes of usable dual-port random-access memory, three timers, including a watchdog timer, four programmable chip-select lines with wait-state logic, programmable address mapping of dual-port RAM and IMP registers, on-chip clock generator with an output clock signal, system control register, bus arbitration logic with low interrupt latency support hardware watchdog for monitoring bus activity, low power (standby) modes, disable CPU logic (TS68000), freeze control for debugging selected on-chip peripherals, DRAM refresh controller.

File format: PDF Size:1127 KB

This file introduces the features of the TS68000/TS68008 microprocessor chip, including the TS68000/TS68008 microprocessor core, system integration block, and communications processor.

File format: PDF Size:1127 KB

The TS68040 is Atmel’s third generation of 68000-compatible, high-performance, 32-bit microprocessors. The TS68040 is a virtual memory microprocessor employing multiple, concurrent execution units and a highly integrated architecture to provide very high performance in a monolithic HCMOS device. On a single chip, the TS68040 integrates a 68030-compatible integer unit, an IEEE 754-compatible floating-point unit (FPU), and fully independent instruction and data demand-paged memory manage- ment units (MMUs), including 4K bytes independent instruction and data caches. A high degree of instruction execution parallelism is achieved through the use of multi- ple independent execution pipelines,

File format: PDF Size:1381 KB

The TS68040 is Atmel's third generation of 68000-compatible, high-performance, 32-bit microprocessors. The TS68040 is a virtual memory microprocessor employing multiple, concurrent execution units and a highly integrated architecture to provide very high performance in a monolithic HCMOS device. On a single chip, the TS68040 integrates a 68030-compatible integer unit, an IEEE 754-compatible floating-point unit (FPU), and fully independent instruction and data demand-paged memory management units (MMUs), including 4K bytes independent instruction and data caches. A high degree of instruction execution parallelism is achieved through the use of multiple independent execution pipelines.

File format: PDF Size:1440 KB

TS68040 is a high-performance 32-bit microprocessor with 26-42MIPS integer performance and 3.5-5.6MFLOPS floating-point performance.

File format: PDF Size:1368 KB

File format: PDF Size:0 KB

The TS68020 is the first full 32-bit implementation of the TS68000 family of microprocessors. It is implemented with 32-bit registers and data paths, 32-bit addresses, a rich instruction set, and versatile addressing modes.

File format: PDF Size:1229 KB

TS80C31X2 8-bit CMOS Microcontroller ROMless

File format: PDF Size:288 KB

File format: PDF Size:0 KB

1078 Series 1-Inch Diameter Steel Door Magnetic Contacts

File format: PDF Size:71 KB

U2896B is a modulation PLL for GSM, DCS and PCS systems. The device integrates a mixer, an I/Q modulator, a phase-frequency detector (PFD) with two synchronous programmable dividers, and a charge pump. The U2896B is designed for cellular phones such as GSM900, DCS1800, and PCS1900, applying a transmitter architecture at which the VCO operates at the TX output frequency. No duplexer is needed since the out-of-band noise is very low. The U2896B exhibits low power consumption. Broadband operation provides high flexibility for multi-band frequency mappings. The IC is available in a shrinked small-outline 36-pin package (SSO36).

File format: PDF Size:215 KB

TDA1083 is a one-chip AM/FM radio with audio power amplifier. It features a large supply voltage range of VS = 3~12 V, high sensitivity, low distortion and low power consumption. It can be used in AM/FM radio and audio amplifier applications.

File format: PDF Size:301 KB

T89C51RB2/RC2 is a high performance FLASH version of the 80C51 8-bit microcontrollers. It contains a 16K or 32Kbytes Flash memory block for program and data. The 16 Kbytes or 32 Kbytes FLASH memory can be programmed either in parallel mode or in serial mode with the ISP capability or with software. The programming voltage is internally generated from the standard VCC pin. The T89C51RB2/RC2 retains all features of the 80C52 with 256 bytes of internal RAM, a 7-source 4-level interrupt controller and three timer/counters. In addition, the T89C51RB2/RC2 has a Programmable Counter Array, an XRAM of 1024 byte, a Hardware Watchdog Timer, a Keyboard Interface, a SPI Interface, a more versatile serial channel that facilitates multiprocessor communication (EUART) and a speed improvement mechanism (X2 mode). Pinout is the standard 40/44 pins of the C52. The fully static design of the T89C51RB2/RC2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data. The T89C51RB2/RC2 has 2 software-selectable modes of reduced activity and 8 bit clock prescaler for further reduction in power consumption. In the Idle mode the CPU is frozen while the peripherals and the interrupt system are still operating. In the power-down mode the RAM is saved and all other functions are inoperative. The added features of the T89C51RB2/RC2 are:

File format: PDF Size:167 KB

The AT25080/160/320/640 series is AT25 series 8-bit serial electrically erasable programmable read only memory (EEPROM) with 8192/16384/32768/65536 bits, organized as 1024/2048/4096/8192 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low power and low voltage operation is required.

File format: PDF Size:128 KB

The document introduces a high-performance and low-power AVR 8-bit RISC architecture product. It features 118 powerful instructions, most of which can be executed in a single cycle. It has 32 general-purpose working registers and can achieve up to 8 MIPS throughput at a clock frequency of 8 MHz. The product also includes 2K/4K bytes of in-system programmable flash, 128 bytes of SRAM, and 128/256 bytes of in-system programmable EEPROM. It also includes a 8-bit timer/counter, an expanded 16-bit timer/counter, an on-chip analog comparator, a programmable watchdog timer, and a programmable UART.

File format: PDF Size:177 KB

AT24C512SC is a serial electrically erasable and programmable read-only memory (EEPROM) with the features of low power and low voltage operation. It provides 524,288 bits of storage space organized into 65,536 words of 8 bits each. This device is suitable for smart card applications, with high reliability and compatibility.

File format: PDF Size:228 KB