SMSC Manuals

smsc USB97CFDC USB Floppy Disk Controller Manual

SMSC DS – USB97CFDC Rev. 12/15/2000 USB97CFDC USB Floppy Disk Controller is a USB floppy disk controller produced by SMSC. It supports 640K, 720K, 1.44M, 1.2M Windows 98 J, and 1.2M NEC DOS 6.x formats.

File format: PDF Size:144 KB

smsc USB97C202 USB 2.0 ATA/ ATAPI Controller handbook

USB97C202 is a USB 2.0 ATA/ ATAPI controller from SMSC. The controller supports 2.5 volt low power core operation, 3.3 volt I/O, and is compatible with USB 2.0 specifications. It also supports USB Mass Storage Compliant Bootable BIOS.

File format: PDF Size:305 KB

smsc USB97C201 Rev 1.5 USB 2.0 ATA/ ATAPI Controller handbook

The USB97C201 is a USB 2.0 ATA/ATAPI controller from SMSC. It supports USB 2.0 specifications and supports USB Mass Storage Compliant Bootable BIOS.

File format: PDF Size:293 KB

smsc USB97C100 ADVANCE INFORMATION Multi-Endpoint USB Peripheral Controller handbook

SMSC DS - USB97C100 is a multi-endpoint USB peripheral controller with high performance, complete USB 1.1 compatibility, high-speed capability, dynamic hardware allocation, and extended power management.

File format: PDF Size:429 KB

SMSC USB3450 Manual

USB3450 is a USB PHY chip from SMSC that supports USB 2.0 Hi-Speed and USB 1.1. It supports 480Mbps data rate, has a low latency receiver, internal 1.8V regulators, short circuit protection, 24MHz crystal oscillator, PLL and 40-pin QFN package.

File format: PDF Size:882 KB

SMSC USB3300 Manual

The SMSC USB3300 is a high-performance USB host or device PHY with ULPI Low Pin Interface. It meets USB-IF“Hi-Speed” certification and the Universal Serial Bus Specification Rev 2.0 requirements, and is compliant with the ULPI Specification revision 1.1 in 8-bit mode.

File format: PDF Size:303 KB

SMSC GT3200/USB3250 Manual

This document describes the features and characteristics of SMSC GT3200 and SMSC USB3250, including USB-IF certification, support for USB2.0 specification, support for data transmission rates of 480Mbps and 12Mbps, integrated termination resistors, internal short circuit protection, low power consumption, etc.

File format: PDF Size:1203 KB

smsc USB2601/USB2602 4th Generation USB2.0 Flash Media Controller with Integrated Card Power FETs HS Hub handbook

USB2601/USB2602 is a 4th generation USB2.0 flash media controller with integrated card power FETs and HS Hub Hub controller.

File format: PDF Size:686 KB

smsc USB2231/USB2232 5th Generation Hi-Speed USB Flash Media CIR Controller with Integrated Card Power FETs handbook

USB2231/USB2232 is the 5th generation Hi-Speed USB Flash Media and CIR controller with integrated card power FETs from SMSC, supporting all popular CIR formats.

File format: PDF Size:741 KB

smsc USB2224 Bus Powered USB2.0 Flash Media Controller handbook

SMSC USB2224 is a USB2.0 flash media controller that supports SmartMedia™, xD Picture Card™, Memory Stick™, High Speed Memory Stick™, Memory Stick PRO™, MS Duo™, Secure Digital™, Mini-Secure Digital™, Transflash™, MultiMediaCard™, Reduced Size Multimedia Card™, NAND Flash, Compact Flash™, CF Ultra™ I & II, CF form-factor ATA hard drives.

File format: PDF Size:290 KB

smsc USB2223-03 Bus Powered USB2.0 Flash Media Controller handbook

SMSC USB2223-03-03 is a USB2.0 flash media controller that provides a complete system solution for interfacing various storage devices to the USB2.0 bus. It supports SmartMediaTM (SM), Memory StickTM (MS), High Speed Memory Stick (HSMS), Memory Stick PROTM (MSPRO), Memory Stick DuoTM (MSDUO), Secure Digital (SD), Mini-Secure Digital (Mini-SD), Transflash (SD), MultiMediaCardTM (MMC), Reduced Size Multimedia Card (RS-MMC), NAND Flash, Compact FlashTM (CF), CF UltraTM I&II, and CF form-factor ATA hard drives. It allows simultaneous operation of the supported devices, but only one device from each group (CF or ATA drive, SM or NAND, SD or MMC) can be operated at a time. The controller includes on-chip 4-bit high speed Memory Stick and MS PRO hardware circuitry, as well as 1-bit ECC correction for maximum efficiency. It is USB Bus Power Certified, has 3.3 Volt I/O with 5V input tolerance, and is fully compatible with USB Specification 2.0.

File format: PDF Size:284 KB

smsc USB20H04 handbook

This datasheet introduces the features of the SMSC USB20H04 4-Port USB2.0 Hub Controller, which is compliant with the USB2.0 specification, supports four downstream ports, and has four transaction translators to ensure maximum USB throughput. The controller supports bus-powered Hi-Speed hub design and is compatible with On-The-Go (OTG) USB devices.

File format: PDF Size:920 KB

SMSC USB2005 Manual

SMSC USB2005 is a USB2.0 ATA/ATAPI controller with PD-DRM function, which can provide digital rights management for portable devices (PD-DRM) via Mass Storage Class SCSI Inquiry command as specified by Microsoft for Windows Media Systems (WM-DRM). Reports all media as Removable (HDDs only).

File format: PDF Size:678 KB

smsc Application Note 10.8 USB97C223 USB97C243 Capacitor Selection for Internal Regulator Output Pins

This application note describes the capacitor selection for the internal regulator output pins of the USB97C223 and USB97C243

File format: PDF Size:354 KB

SMSC LPC47M14x PRELIMINARY handbook

This is a technical manual for SMSC LPC47M14X Super I/O controller

File format: PDF Size:1220 KB

SMSC USB2227/USB2228 4th Generation USB2.0 Flash Media Controller with Integrated Card Power FETs Datasheet

USB2227/USB2228 is SMSC's fourth generation USB2.0 flash media controller that supports SmartMedia, xD Picture Card, Memory Stick, High Speed Memory Stick, Memory Stick PRO, MS Duo, Secure Digital, Mini-Secure Digital, TransFlash, MultiMediaCard, Reduced Size MultiMediaCard, NAND Flash, Compact Flash and CF Ultra I & II and Compact Flash form-factor ATA hard drives

File format: PDF Size:719 KB

SMSC LPC47S42x DATA SHEET

LPC47S42x Enhanced Super I/O with LPC Interface for Server Applications is a product that operates at 3.3 volts (5V tolerant) and is designed for server applications. It features two floppy disk controllers, a multi-mode parallel port, two UARTs, an 8042 keyboard controller, an SMBus controller, an X-Bus interface, a programmable wakeup event interface, SMI support, GPIOs (39), fan speed control output, fan tachometer input, ISA IRQ to serial IRQ conversion, XNOR chain, PC99 and ACPI 1.0 compliance, ISA plug-and-play compatible register set, and intelligent auto power management.

File format: PDF Size:1343 KB

SMSC USB2512i DATASHEET

SMSC USB2512i is a low power, OEM configurable, STT (Single transaction translator) hub controller IC with 2 downstream ports for embedded USB solutions.

File format: PDF Size:849 KB

SMSC USB2512 handbook

SMSC USB2512 is a USB 2.0 high-low speed 2 port hub controller IC with 2 downstream ports, suitable for embedded USB solutions.

File format: PDF Size:847 KB

smsc LAN83C171 ADVANCE INFORMATION LAN83C171 - EPIC/XF ACPI/PC 97 Compliant Integrated PCI 10/100 Mbps Fast Ethernet Controller handbook

This product is a 10/100Mbps fast Ethernet controller with PCI bus interface, supports PCI 2.1 standard, supports CardBus status registers, supports two-channel bus master, supports scatter/gather DMA function, supports pre-fetch interrupt support, supports Wake-Up on Magic Packet TM detection and network link down event, supports chained transmission data packets, supports early transmit and early receive, supports optional early receive buffer mode, supports automatic rejection of small packets, supports automatic retransmission of collision frames, supports automatic padding of short frames, supports 4.5K bytes of receive buffer and 1.5K bytes of transmit buffer, supports optional 32-bit wide external receive buffer, supports big/little endian byte order, supports 64K bytes of expansion boot flash RAM

File format: PDF Size:297 KB

Brands



Products