ANALOG Manuals

This document is the reference manual for ADCMP604/ADCMP605, which introduces the features and characteristics of the product.

File format: PDF Size:366 KB

The document introduces the ADCMP606/ADCMP607 two types of comparator products, which have full range power supply range, low power consumption, high speed, CML compatible output and other features, suitable for high-speed instrumentation, clock and data signal restoration, logic level shifting or translation, pulse spectroscopy, high-speed line receivers, threshold detection, peak and zero crossing detectors, high-speed trigger circuit, pulse-width modulator, current / voltage-controlled oscillator, automatic test equipment (ATE) and other applications

File format: PDF Size:355 KB

ADCMP580/ADCMP581/ADCMP582 are ultrafast SiGe voltage comparators from Analog Devices. These comparators offer 180ps propagation delay, 25ps overdrive and slew rate dispersion, 8GHz equivalent input rise time bandwidth, 100ps minimum pulse width, 37ps typical output rise/fall, 10ps deterministic jitter (DJ), 200fs random jitter (RJ), -2V to +3V input range with +5V/-5V supplies, on-chip terminations at both input pins, resistor-programmable hysteresis, differential latch control and >70dB power supply rejection. These comparators are suitable for automatic test equipment (ATE), high speed instrumentation, pulse spectroscopy, medical imaging and diagnostics, high speed line receivers, threshold detection, peak and zero-crossing detectors, high speed trigger circuitry and clock and data signal restoration applications.

File format: PDF Size:411 KB

The ADCMP561/ADCMP562 are high-speed PECL comparators with 700 ps propagation delay, 75 ps propagation delay dispersion, -2.0 V to +3.0 V input common-mode range, robust input protection, differential latch control, internal latch pull-up resistors, power supply rejection ratio greater than 85 dB, 700 ps minimum pulse width, 1.5 GHz equivalent input rise time bandwidth, typical output rise/fall time of 500 ps, ESD protection > 4kV HBM, >200V MM programmable hysteresis.

File format: PDF Size:301 KB

The ADCMP563/ADCMP564 are dual, high speed ECL comparators with a propagation delay of 700 ps and a propagation delay dispersion of 75 ps.

File format: PDF Size:270 KB

The ADCMP567 is a dual ultrafast voltage comparator with features including 250ps propagation delay input to output, 50ps propagation delay dispersion, differential PECL compatible outputs, and differential latch control.

File format: PDF Size:363 KB

The ADCMP566 is a dual ultrafast voltage comparator with a typical output rise/fall time of 165 ps, an input common-mode range of -2.0 V to +3.0 V, and an input differential range of ±5 V.

File format: PDF Size:208 KB

AD8611/AD8612 are ultrafast, single-supply comparators with a propagation delay of 4 ns and single-supply operation. They are suitable for high-speed timing, clock recovery and clock distribution, line receivers, digital communications, phase detectors, high-speed sampling, read channel detection, PCMCIA cards, zero-crossing detection, high-speed analog-to-digital converters (ADC), and upgrades for LT1394 and LT1016 designs.

File format: PDF Size:402 KB

This document describes the features and characteristics of the Quad 7 ns Single Supply Comparator AD8564 Rev. B, including 5V single-supply operation, 7ns propagation delay, low power, separate input and output sections, TTL/CMOS logic-compatible outputs, etc.

File format: PDF Size:250 KB

This document describes the features and characteristics of Analog Devices' CMP401/CMP402 low voltage comparators, including 23 ns and 65 ns propagation delay, single-supply operation, compatibility with 3V and 5V logic, separate input and output sections, low power, wide input range, etc.

File format: PDF Size:133 KB

AD790 is a fast (45 ns), precise voltage comparator from Analog Devices (ADI). It has a number of features that make it exceptionally versatile and easy to use. The AD790 may operate from either a single 5 V supply or a dual ±15 V supply. In the single-supply mode, the AD790's inputs may be referred to ground, a feature not found in other comparators. In the dual-supply mode it has the unique ability of handling a maximum differential voltage of 15 V across its input terminals, easing their interfacing to large amplitude and dynamic signals. This device is fabricated using Analog Devices' processes and offers high performance, low power consumption, and low noise.

File format: PDF Size:152 KB

AD96685/AD96687 are ultrafast voltage comparators. The AD96685 is a single comparator with 2.5ns propagation delay; the AD96687 is an equally fast dual comparator. Both devices feature 50ps delay dispersion and are suitable for high-speed triggers, high-speed line receivers, threshold detectors, window comparators, and peak detectors.

File format: PDF Size:102 KB

ADM12914 is a quad undervoltage/overvoltage (UV/OV) positive/negative voltage supervisor with ±0.8% accuracy. It can monitor up to two negative rails. The product features adjustable UV and OV input thresholds, industry-leading threshold accuracy, 1V buffered reference output, adjustable reset timeout with disable option, etc.

File format: PDF Size:362 KB

The ADM2914 is a quad voltage supervisory IC ideally suited for monitoring multiple power supply systems. It features adjustable UV and OV input thresholds, high threshold accuracy of ±1.5% over temperature, a 1V buffered reference output, and adjustable reset timeout with disable option.

File format: PDF Size:548 KB

The ADCMP341/ADCMP343 are two low power, high accuracy comparators with a 400 mV reference in an 8-lead SOT-23 package. Operating within a supply range of 1.7 V to 5.5 V, the devices only draw 6.5 μA (typical), making them ideal for low voltage system monitoring.

File format: PDF Size:336 KB

ADCMP361 is a low power, high accuracy comparator with a 400 mV reference from Analog Devices. The device operates on a supply voltage from 1.7 V to 5.5 V.

File format: PDF Size:278 KB

The ADCMP670 is a dual low power 1.5% comparator with a 400mV reference voltage. It features a 400mV ± 1.5% threshold, a supply range of 1.7V to 5.5V, low quiescent current, an input range that includes ground, open-drain outputs, and is suitable for applications such as Li-Ion monitoring, portable devices, handheld instruments, window comparators, LED/relay driving, optoisolator driving, and control systems.

File format: PDF Size:306 KB

ADCMP350/ADCMP352/ADCMP354/ADCMP356 are open-drain output comparators and reference circuits suitable for use in general-purpose applications. The high voltage input and output structures will allow voltage detectors, microprocessor systems, computers, battery monitors, intelligent instruments and portable equipment to be applied.

File format: PDF Size:189 KB

The ADCMP370/ADCMP371 are general-purpose comparators with low power consumption and low input offset voltage, making them ideal for battery-powered portable devices. The ADCMP371 has a push-pull output stage.

File format: PDF Size:190 KB

The ADCMP609 is a fully specified rail-to-rail comparator suitable for single-supply TTL/CMOS applications, with features including high speed, low power, low voltage, and low glitch.

File format: PDF Size:279 KB