ANALOG Manuals

File format: PDF Size:0 KB

The SSM2375 is a fully integrated, high efficiency, Class-D audio amplifier. It is designed for portable and mobile applications with its small size and low power consumption. The amplifier features a spread-spectrum Σ-Δ modulation scheme that provides excellent performance with low distortion and high efficiency.

File format: PDF Size:328 KB

The SSM2804 is an audio subsystem designed specifically for mobile phones. It features 3 single-ended stereo audio inputs with optional differential mode, stereo, 1.4 W, filterless Class-D amplifiers with Σ-Δ modulation, integrated receiver path bypass switch, configurable, high performance capless headphone output with true ground Class-G technology, optional hardware-based headphone level limiter, I2C control interface, volume control, flexible input/output mixing, output mode control, EMI emissions control, automatic level control (ALC), adjustable headphone level limiter, low shutdown current, short-circuit and thermal protection, pop-and-click suppression, and is available in a 30-ball, 2.5 mm × 3.0 mm WLCSP.

File format: PDF Size:636 KB

The SSM2377 is a filterless, high efficiency, mono 2.5 W Class-D audio amplifier. It features high efficiency, high signal-to-noise ratio, and low electromagnetic emissions.

File format: PDF Size:475 KB

This data sheet introduces the features of the SSM3302 filterless Class-D stereo audio amplifier

File format: PDF Size:1124 KB

AD824 is a low power, single supply, full range output operational amplifier from Analog Devices. It features low input bias current, wide input voltage range, low supply current and wide bandwidth. It is widely used in photo diode preamplifier, battery powered instrumentation, power supply control and protection, medical instrumentation, remote sensors, low voltage strain gage amplifiers and DAC output amplifier etc.

File format: PDF Size:346 KB

The document provides the datasheet of AD9888 Analog Flat Panel Interface, including maximum conversion rate, programmable analog bandwidth, analog input range, clock jitter, etc.

File format: PDF Size:495 KB

This document is the user manual for AD9880, which introduces the functions, features, applications, and usage methods of AD9880

File format: PDF Size:1140 KB

AD9985A Rev. 0 is an analog interface for flat panel displays with a conversion rate of 110 MSPS / 140 MSPS. It features variable analog input bandwidth control, variable SOGIN bandwidth control, and automated clamping level adjustment.

File format: PDF Size:623 KB

File format: PDF Size:0 KB

AD9381 is a HDMI display interface that supports 1.8V/3.3V power supply, supports RGB and YCbCr output formats, supports HDMI 1.1, DVI 1.0, supports HDCP 1.1, supports S/PDIF and multi-channel I2S audio output.

File format: PDF Size:741 KB

The AD9380 is an analog/HDMI dual-display interface with features such as high bandwidth digital content protection, RGB-to-YCbCr color conversion, and automated clamping level adjustment.

File format: PDF Size:1202 KB

AD9983A is a high-performance 8-bit display interface chip with 8-bit analog-to-digital converters, low PLL clock jitter, automatic gain matching, automated offset adjustment, 2:1 input multiplexer, dedicated pin or serial register power-down, 4:4:4, 4:2:2 and DDR output format modes, variable output drive strength, odd/even field detection, external clock input, regenerated Hsync output, programmable output high impedance control, Hsyncs per Vsync counter, lead-free package and so on.

File format: PDF Size:910 KB

The High Performance 10-Bit Display Interface AD9984A is a high-performance 10-bit display interface with features such as automatic gain matching and automated offset adjustment.

File format: PDF Size:839 KB

This document describes a 12-bit, 170 MHz video and graphics digitizer with quad HDMI receiver. It has various features including high-speed ADC sampling, multi-channel analog input mux, support for component and HDTV inputs at different resolutions, digitization of RGB graphics, and multiple audio interfaces and functions.

File format: PDF Size:74 KB

AD9393 is a low power HDMI display interface chip that supports HDMI 1.2a, DVI 1.0, supports high bandwidth digital content protection (HDCP 1.1), supports RGB and YCrCb two output formats.

File format: PDF Size:791 KB

12-Bit Deep Color Quad HDMI Receiver ADI Confidential ADV7614 Rev. SpB is a high performance HDMI receiver from Analog Devices that supports 4:1 multiplexing and offers 36/30/24 bit deep color support.

File format: PDF Size:58 KB

This data sheet describes the features and characteristics of the ADV7611 low power HDMI receiver.

File format: PDF Size:239 KB

This data sheet describes the features and characteristics of the ADV7619 Rev. B

File format: PDF Size:556 KB

The document describes the HDMI transceiver ADV7623, which has a fast port switching feature. The product supports HDMI 1.4a standard, including features such as audio return channel, 3D TV support, content type bits, CEC 1.4 compatibility, and extended colorimetry. It also supports High-Bandwidth Digital Content Protection (HDCP 1.4) and HDCP repeater functionality. The product features a 4-input, 1-output multiplexed HDMI transceiver, with support for 225 MHz HDMI Rx and Tx, and 36-/30-/24-bit Deep Color. It also includes Xpressview fast switching, character- and icon-based on-screen display, and support for DVI RGB graphics. The product is equipped with an ultralow jitter digital PLL and adaptive equalizer for cable lengths up to 30 meters. It also supports internal extended display identification data (EDID) RAM, EDID replication, 5V power support, and hot plug functionality.

File format: PDF Size:71 KB