AMIC Manuals

The A132000 is a fully CMOS integrated circuit. It uses advanced design and process technology to combine an 8-bit RISC processor with program/data ROM, 80-byte working SRAM, timer/counter, I/O, built-in oscillator and audio current mode D/A.

File format: PDF Size:118 KB

A29L320 Series 4M X 8 Bit / 2M X 16 Bit CMOS 3.3 Volt-only, Preliminary Boot Sector Flash Memory

File format: PDF Size:594 KB

File format: PDF Size:0 KB

A67L06181/A67L93361 Preliminary 1M X 18, 512K X 36 LVTTL, Flow-through ZeBLTM SRAM is a datasheet of A67L06181 series SRAM products released by AMIC Technology, Corp. The product uses high-performance, low-power CMOS design with 6.5/7.5/8.5 ns (153, 133, 117 MHz) fast access time, supporting 100% bus utilization.

File format: PDF Size:250 KB

A64S9316 is a low power consumption super RAM from AMIC, using low supply voltage, working voltage is 2.7V to 3.1V, operating current is 35mA, standby current is 10µA.

File format: PDF Size:180 KB

This document describes the features and characteristics of the A615308 series 32K X 8 BIT HIGH SPEED CMOS SRAM, such as single +5V power supply, access times, full static operation, TTL compatible inputs and outputs, etc.

File format: PDF Size:192 KB

A23L0616/A23L06161/A23L06162 Series Preliminary 1M x 16 / 2M x 8 BIT CMOS MASK ROM.

File format: PDF Size:261 KB

This document describes the features and characteristics of the A67L83161/A67L83181/ A67L73321/A67L73361 Series 256K X 16/18, 128K X 32/36 LVTTL, flow-through DBATM SRAM.

File format: PDF Size:282 KB

A623308 is a low operating current 65,536-bit static random access memory organized as 8,192 words by 8 bits and operates on a single 5V power supply. Inputs and three-state outputs are TTL compatible and allow for direct interfacing with common system bus structures. Minimum standby power is drawn by this device when CE is at a high level.

File format: PDF Size:135 KB

The A29L320 series is a 4M x 8-bit/2M x 16-bit CMOS 3.3-volt-only flash memory with preliminary boot sector. It features single power supply operation, various access times, flexible sector architecture, unlock bypass program command, and more.

File format: PDF Size:596 KB

AD120 3-Level / 258 Outputs TFT LCD Gate Driver is a gate driver for TFT LCD panel. There are 258 outputs in the chip. Three-level output allows voltage correction for better switching noise rejection. It can be used for XGA / SXGA panels.

File format: PDF Size:154 KB

This document is a technical specification sheet about 512K X 16 Bit X 2 Banks Synchronous DRAM released by AMIC Technology, Inc. It mainly introduces the features and characteristics of the product.

File format: PDF Size:1034 KB

File format: PDF Size:540 KB

File format: PDF Size:0 KB

This document describes the features and characteristics of the A29040 series 512K x 8-bit CMOS 5.0 Volt-only Uniform Sector Flash Memory for 5.0V ± 10% read and write operations.

File format: PDF Size:303 KB

This document describes the features and characteristics of the A29002/A290021 series 256K x 8 bit CMOS 5.0 Volt-only, Boot Sector Flash Memory, including voltage requirements, access times, current consumption, flexible sector architecture, sector protection, boot block configurations, embedded erase algorithms, embedded program algorithm, program/erase cycles per sector, data retention, compatibility, data polling and toggle bits, erase suspend/erase resume, etc.

File format: PDF Size:330 KB

A426316B Series is 64K x 16 CMOS Dynamic RAM with EDO page mode. This series has high speed, low power consumption, separate CAS (UCAS, LCAS) for byte selection, self refresh mode, 256 refresh cycles, 4 ms refresh interval, read-modify-write, RAS-only, CAS-before-RAS, hidden refresh capability, TTL-compatible, three-state I/O, JEDEC standard packages (400mil, 40-pin SOJ-400mil, 40/44 TSOP type II package), single 5V power supply/built-in VBB generator.

File format: PDF Size:420 KB

A29L800A Series 1M x 8Bit / 512K x 16Bit CMOS 3.0 Volt-only, Boot Sector Flash Memory (March, 2006, Version 1.2) AMIC Technology, Corp. This document provides details of the 1M x 8Bit / 512K x 16Bit CMOS 3.0 Volt-only, Boot Sector Flash Memory. The document includes the product's features and characteristics, access times, current, flexible sector architecture, sector protection and extended operating temperature range.

File format: PDF Size:515 KB

The A25L80P series is an 8 Mbit low voltage serial flash memory with a 75 MHz SPI bus interface. It features a flexible sector architecture that supports sector sizes of 4/4/8/16/32KB/64x15 KB. The product offers fast erase and programming speeds, making it suitable for a variety of applications.

File format: PDF Size:463 KB

A29L160A Series 2M X 8 Bit / 1M X 16 Bit CMOS 3.3 Volt-only, Boot Sector Flash Memory

File format: PDF Size:500 KB