hittite Manuals

The HMC305LP4 and HMC305LP4E are broadband 5-bit positive control GaAs IC digital attenuators with CMOS compatible serial-to-parallel drivers packaged in leadless QFN 4x4 mm SMT packages. Covering 0.7 to 3.8 GHz, the insertion loss is typically less than 1.5 to 2 dB. The attenuator bit values are 0.5 (LSB), 1, 2, 4, and 8 dB for a total attenuation of 15.5 dB. Attenuation accuracy is excellent at ±0.25 dB typical with an IIP3 of up to +52 dBm. Five bit serial control words are used to select each attenuation state. A single Vcc bias of +3V to +5V applied through an external 5k Ohm resistor is required. The HMC305LP4 / HMC305LP4E is ideal for: • Cellular/3G Infrastructure • Fixed Wireless, WiMax & WiBro • Test Instrumentation

The HMC509LP5/509LP5E MMIC VCO is a wideband voltage-controlled oscillator with a frequency range of 7.8-8.8 GHz. It is fabricated using GaAs InGaP Heterojunction Bipolar Transistor (HBT) and has excellent temperature, shock, and process performance. The VCO output power is +13 dBm and it is packaged in a leadless QFN 5x5 mm surface mount package, which does not require any external matching components.

The HMC494LP3 is a low noise Divide-by-8 Static Divider utilizing InGaP GaAs HBT technology packaged in a leadless 3x3 mm QFN surface mount plastic package. This device operates from DC (with a square wave input) to 18 GHz input frequency from a single +5.0V DC supply. The low additive SSB phase noise of -150 dBc/Hz at 100 kHz offset helps the user maintain excellent system noise performance.

HMC410MS8G is a passive double balanced high IP3 mixer from Hittite Microwave that operates between 9 GHz and 15 GHz. It provides 8 dB conversion loss across the entire specified frequency band, with a LO drive level between +13 dBm and +19 dBm. This mixer requires no external components or bias.

HMC370LP4 is a GaAs HBT MMIC x4 ACTIVE FREQUENCY MULTIPLIER from Hittite Microwave. It has an output frequency of 14.4 - 16.4 GHz, an input power range of -15 +5 dBm, and an output power of 0 dBm. It also features low harmonic suppression and low SSB phase noise.

This document describes the HMC506LP4 GaAs InGaP HBT MMIC VCO, which includes an integrated resonator, negative resistance device, varactor diode, and buffer amplifier. The product covers a frequency range of 7.8 to 8.7 GHz and exhibits excellent phase noise performance, making it suitable for low noise applications.

The document provides information about the price, delivery, and ordering process of MICROWAVE CORPORATION 8 - 28. It also describes the features and characteristics of the HMC287MS8 GaAs MMIC LOW NOISE AMPLIFIER, including its gain, noise figure, and single positive supply.

The HMC226 is a high performance, low cost SPDT switch from Hittite Corporation. It is suitable for 450MHz, 900MHz and 1.8-2.0GHz applications of transmit and receive. The switch has a low insertion loss of 0.5-0.8dB and a high input compression point (P1dB) and third order intercept point (IP3). The switch is packaged in SOT26 and is powered by +3V. The input current is low, and it is compatible with CMOS and most TTL logic circuits.

HMC510LP5 is a GaAs InGaP Heterojunction Bipolar Transistor (HBT) MMIC VCO from Hittite Microwave Corporation. The frequency range is 8.45-9.55 GHz. The VCO integrates resonators, negative resistance devices, varactor diodes, and features half frequency and divide-by-4 outputs. The VCO's phase noise performance is excellent over temperature, shock, and process due to the oscillator's monolithic structure. Power output is +13 dBm typical from a +5V supply voltage. The prescaler and RF/2 functions can be disabled to conserve current if not required. The voltage controlled oscillator is packaged in a leadless QFN 5x5 mm surface mount package, and requires no external matching components.

The HMC121C8 is a non-hermetic surface-mount RF voltage variable attenuator suitable for the DC - 10 GHz frequency range. It features wide bandwidth, low phase shift, and simplified voltage control. The device is ideal for designs where an analog DC control signal is used to control RF signal levels within a 25 dB amplitude range.

The HMC121G8 is an absorptive voltage variable attenuator provided in a surface-mount hermetic package. It features wide bandwidth (DC - 8 GHz) and low phase shift. It is ideal for designs where an analog control signal must control RF signal levels over a 30 dB amplitude range, such as in AGC circuits and in temperature compensation of multiple gain stages. Applications include military ECM and communications as well as commercial microwave radios and VSAT.

The HMC128 is a miniature double-balanced mixer chip from Hittite Microwave Corporation with high dynamic range, small size and no DC bias required. It is ideal for microwave and VSAT radios, test equipment, military EW, ECM, C3I and space telecom

The HMC128G8 is a miniature double-balanced mixer from Microwave Corporation, with a frequency range of 1.8-5 GHz, high dynamic range, noise figure equal to conversion loss, and can be used for base stations, MMDS, wireless LAN and wireless local loop applications.