Key facts
- Manuals
- 5
- Languages
- EN · ZH
- Last added
- 2026-10-01
Featured Ametek manuals
AMETEK JOFRA ASM-801/802/803 A/B Advanced Signal Multi-scanner Reference Manual
This reference manual introduces the AMETEK JOFRA Advanced Signal Multi‑scanner series (ASM‑801, ASM‑802, ASM‑803, models A and B). It is intended for users and service technicians who need to install, operate, calibrate, and maintain the instrument in an industrial environment.
The document is organized into chapters covering safety instructions, receiving the instrument, hardware setup, sensor connections, remote operation via RS‑232, operating procedures, maintenance, error handling, adjustment and calibration, technical specifications, and a complete list of accessories. Safety symbols, warranty information, and compliance with CE and EMC directives are also included.
Covers: Introduction · Safety instructions · Receiving the multi‑scanner · Setting up the multi‑scanner · Operating the multi‑scanner · Remote operation
AMETEK JOFRA RTC Series Dry Well Calibrator Product Leaflet
The AMETEK JOFRA RTC Series dry‑well calibrators provide precise temperature calibration for thermocouples, RTDs, temperature switches and liquid thermometers. The series includes a wide range of models (RTC‑159A, RTC‑159B, … RTC‑700C) covering temperatures from –80 °C up to 1300 °C.
The document contains a selection guide, calibration specifications, software information, and details on accessories such as probes, scanners and portable units. It also describes the dynamic load compensation (DLC) technology that ensures uniform temperature fields and high accuracy during multi‑probe calibrations. This manual is written in Chinese.
Covers: Selection Guide · Calibration Specification · JOFRA Dry‑Well Calibrator Overview · Temperature Scanner · Calibration Software · Data Acquisition Software
AMETEK ProLine Mass Spectrometer User Manual
This manual covers the theory of mass spectrometry, the sampling system, hardware components, ionization, separation, detection, and data system for the AMETEK ProLine Mass Spectrometer. It includes detailed safety notes, electrical grounding, and chemical handling guidelines.
The document also provides step‑by‑step installation procedures, wiring diagrams, board replacement instructions, and troubleshooting tips, along with specifications for communication interfaces, physical dimensions, and optional pressure‑range modules.
Covers: Safety Notes · Electrical Safety and Grounding · Overview of Mass Spectrometer Theory · Installation / Operation · Maintenance and Troubleshooting · Board Replacement
Ametek APM Pressure Module Specification Sheet
The sheet details the APM pressure‑module family, covering combination, gauge, absolute, differential and vacuum types. Each model’s pressure range spans from -15 psi up to 700 bar, with material construction of 316L stainless steel and options for dry‑air or corrosive‑gas compatibility.
Technical data include module dimensions (99 × 55 × 55 mm), weight (450 g), pressure interface (1/4 in. NPT female), communication connector (Lemo 5‑pole male), a 10‑minute warm‑up time, and a reading rate of 50 samples per second. Optional communication kits (APM‑S, APM‑H) are also listed. This manual is written in Chinese.
Covers: Pressure Ranges and Types · Dimensions and Weight · Pressure and Reference Interfaces · Communication Interface · Calibration Certificate · Warm‑up Time and Reading Rate
Latest Ametek manuals
AMETEK JOFRA ASM-801/802/803 A/B Advanced Signal Multi-scanner Reference Manual
Service Manual 60 pages · 471 KB · ENThe AMETEK JOFRA ASM-801/802/803 A/B Reference Manual provides setup, operation, maintenance instructions and technical specifications for the Advanced…
AMETEK JOFRA RTC Series Dry Well Calibrator Product Leaflet
Product Leaflet 44 pages · 6.1 MB · ZHTechnical overview, specifications and selection guide for the AMETEK JOFRA RTC Series dry‑well calibrators.
AMETEK ProLine Mass Spectrometer User Manual
User Manual 144 pages · 6.8 MB · ENThe AMETEK ProLine Mass Spectrometer User Manual provides safety, installation, operation, and maintenance instructions for the ProLine analyzer.
Ametek APM Pressure Module Specification Sheet
Datasheet 2 pages · 49 KB · ZHThe Ametek APM pressure module specification sheet lists pressure ranges, types, accuracy, dimensions, interfaces and optional accessories for the APM series.
Grabner Mobile Fuel Laboratory User Guide
User Manual 8 pages · 2.8 MB · ZHUser guide for Grabner's portable, fully automated mobile fuel laboratory for on‑site fuel analysis.
Which document do I need?
Service Manual
Disassembly, diagnostics and part numbers, for repair.
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Datasheet
Ratings, dimensions and ordering codes, for selection and design work.
Questions answered in Ametek manuals
What accessories are supplied with the ASM‑801/802/803 multi‑scanner?
The package includes one multi‑scanner, one power supply, a traceable certificate, the reference manual, a screwdriver (ASM‑801 only), an RS‑232 serial cable, and a CD‑ROM with the JOFRACAL software.
From: AMETEK JOFRA ASM-801/802/803 A/B Advanced Signal Multi-scanner Reference Manual
What is the signal range for the ASM‑801 B model?
The ASM‑801 B model accepts a current signal range of 0 to 24 mA.
From: AMETEK JOFRA ASM-801/802/803 A/B Advanced Signal Multi-scanner Reference Manual
What is the overall temperature range of the RTC Series calibrators?
The calibrators cover temperatures from –80 °C up to 1300 °C.
From: AMETEK JOFRA RTC Series Dry Well Calibrator Product Leaflet
How many temperature probes can be calibrated at the same time?
Up to 24 temperature elements can be calibrated simultaneously.
From: AMETEK JOFRA RTC Series Dry Well Calibrator Product Leaflet
What communication connector do the APM modules use?
They use a Lemo 5‑pole male connector for digital communication.
What is the accuracy of the combination pressure modules?
Full‑scale accuracy is ±0.035 % (plus 0.07 % repeatability).