ROHM manuals, page 19
rohm LM393WPT technical Note
The LM393/LM339/LM2903/LM2901 series of comparators are integrated circuits launched by Rohm, which feature high gain, low power consumption, and a wide voltage range. This series of products has commercial and industrial grades. The temperature range of commercial grade is 0℃ to 70℃. The temperature range of industrial grade is -40℃ to 125℃. The output stage of this series of products adopts open collector output, which can be compatible with single/dual power supply. The supply current is 0.4 mA (LM2903/393 series) and 1.1 mA (LM2901/339 series). The input bias current is 25 nA. The input offset current is 5 nA. The input voltage range includes ground. The differential input voltage can be applied to the absolute maximum rating ±36 V. The output voltage is TTL, MOS and CMOS compatible output.
rohm BU4S66G2 technical Note
This datasheet introduces the functions, features, applications and technical parameters of BU4S66G2.
rohm BU4SU69G2 technical Note
BU4S01G2,BU4S11G2,BU4SU69G2,BU4S71G2,BU4S81G2, BU4S584G2 is a single-gate CMOS logic IC produced by ROHM. It is packaged in SSOP5 and has a power supply voltage range of 3V-16V. It features low power consumption, high input impedance, high fan-out, and is compatible with BU4000B series (1ch). It is suitable for use in applications that require low power consumption and high noise tolerance.
rohm BU8272GUW technical Note
GPIO expander is a useful tool for applications that lack IO ports. It can control GPIO output states using the I2C write protocol and detect GPIO input states using the I2C read protocol. Additionally, it has an interrupt function that frees the CPU from polling the registers in the GPIO expander. GPIO expanders also feature built-in power on reset, 3V tolerant input, and NMOS open-drain output.
rohm BU4066BCFV technical Note
BU4066BC series is a four-channel single-pole double-throw switch that can control digital or analog signals. BU4051BC/BU4052BC/BU4053BC/BU4551B series are analog selectable composite multiplexers/demultiplexers. BU4051BC series is configured with 8 channels, BU4052BC series is configured with two 4 channels, BU4053BC series is configured with three 2 channels, BU4551B series is configured with four 2 channels, and switches applicable for each channel are turned on according to digital signals of control terminal. Even if the logic amplitude (VDD-VSS) of the control signal is small, signals of large amplitude (VDD-VEE) can be switched.
ROHM BU1850MUV handbook
The GPIO Expander IC BU1850MUV is a chip used to expand IO ports. It can control GPIO output states through the I2C write protocol and read GPIO input states through the I2C read protocol. Furthermore, it has an interrupt function that can release the CPU from polling the registers in the GPIO expander. GPIO expanders are also equipped with built-in power on reset, 3V tolerant input, and NMOS open-drain output.
ROHM BU1851GUW handbook
The BU1851GUW key encoder IC is an 8x8 keyboard encoder IC that supports 64 keys and is compatible with QWERTY keyboards. It adopts the architecture that the information of the only key whose status is changed, such as push or release, is encoded into the 8 bits data. This can greatly reduce the CPU load which tends to become heavier as the number of keys increase. (Previously, all key's status is stored in the registers.) Furthermore, auto sleep function contribute to low power consumption, when no keys are pressed. It is also equipped with the various functions such as ghost key rejection, N-key Rollover, Built-in power on reset and oscillator.
ROHM BU1852GUW handbook
BU1852GUW is a key encoder IC from ROHM that supports up to 96 key matrix keyboards and has low power consumption and anti-interference features.
ROHM BU2098F/BU2090F/BU2090FS handbook
This document describes the BU2098F, BU2090F, and BU2090FS series serial-in/parallel-out drivers. These drivers feature direct LED driving, 8/12-bit parallel output, and low voltage operation.
ROHM BU2050F/BU2092F/BU2092FV/BU2099FV/BD7851FP/BU2152FS handbook
This document introduces the serial-in / parallel-out driver series products from ROHM, which incorporates a built-in shift register and a latch circuit to control a maximum of 24 LEDs through a 4-line interface connected to a microcontroller. The products feature direct LED driving, maximum 24-bit parallel output, operation on low voltage, and cascade connection capability, making them suitable for AV equipment such as audio stereo sets, videos and TV sets, PCs, and control microcontroller mounted equipment.
ROHM BD11600NUX handbook
BD11600NUX is a DPDT USB switch IC that handles USB2.0 high-speed devices with low resistance and low capacitance. It operates from 2.5V to 5.5V and has a low consumption mode. The product also features electrostatic discharge protection circuitry. It is suitable for applications such as digital still cameras, digital video camcorders, portable navigation devices, TVs, portable DVD players, portable game systems, personal computers, PDAs, and mobile phones.
ROHM BA829 handbook
BA829 is a 5-line serial-in / parallel-out driver from ROHM. It can drive a maximum of 300mA current of LED and has features such as low standby current and cascading connection. It is mainly used in AV equipment such as component stereo sets, videos and TV sets, PCs and control microcontroller mounted equipment.
ROHM BU2508FV/BU2507FV handbook
BU2508FV and BU2507FV are high performance 10-bit R-2R type DACs with 4-channel and 6-channel outputs, respectively. Each channel incorporates a full swing output-type buffer amplifier with high-speed output response characteristics, resulting in a greatly shortened wait time. The ICs also utilize the TTL level input method.
ROHM BH2226FV/BH2226F handbook
BH2226FV,BH2226F is an 8bit R-2R-type D/A converter with 8 channels from ROHM. It supports serial/parallel conversion and has a built-in RESET function. It has a wide voltage range of 2.7V-5.5V to meet different design requirements.
ROHM BH2227FV/BH2228FV handbook
The BH2227FV and BH2228FV are 8-bit R-2R type D/A converters with 4 and 6 channels, respectively. Optimized circuitry allows two output voltages to be supplied (3V/5V). Furthermore, the built-in RESET function ensures that the output voltage at all channels is Low during power up. A broad power supply voltage range is available (2.7V-5.5V), providing design flexibility.