AMIC Manuals - Page 2

ManualLib has 44 AMIC manuals. Every file can be read online or downloaded as a PDF for free.

AMIC manuals, page 2

  • AMIC A29002/A290021 SERIES DATA SHEET

    This document describes the features and characteristics of the A29002/A290021 series 256K x 8 bit CMOS 5.0 Volt-only, Boot Sector Flash Memory, including voltage requirements, access times, current consumption, flexible sector architecture, sector protection, boot block configurations, embedded erase algorithms, embedded program algorithm, program/erase cycles per sector, data retention, compatibility, data polling and toggle bits, erase suspend/erase resume, etc.

  • AMIC A426316B Series Datasheet

    A426316B Series is 64K x 16 CMOS Dynamic RAM with EDO page mode. This series has high speed, low power consumption, separate CAS (UCAS, LCAS) for byte selection, self refresh mode, 256 refresh cycles, 4 ms refresh interval, read-modify-write, RAS-only, CAS-before-RAS, hidden refresh capability, TTL-compatible, three-state I/O, JEDEC standard packages (400mil, 40-pin SOJ-400mil, 40/44 TSOP type II package), single 5V power supply/built-in VBB generator.

  • AMIC - A29L800A Series 1M X 8 Bit 512K X 16 Bit CMOS 3.0 Volt-only Boot Sector Flash Memory handbook

    A29L800A Series 1M x 8Bit / 512K x 16Bit CMOS 3.0 Volt-only, Boot Sector Flash Memory (March, 2006, Version 1.2) AMIC Technology, Corp. This document provides details of the 1M x 8Bit / 512K x 16Bit CMOS 3.0 Volt-only, Boot Sector Flash Memory. The document includes the product's features and characteristics, access times, current, flexible sector architecture, sector protection and extended operating temperature range.

  • AMIC - A25L80P Series 8 Mbit Low Voltage Serial Flash Memory With 75 MHz SPI Bus Interface handbook

    The A25L80P series is an 8 Mbit low voltage serial flash memory with a 75 MHz SPI bus interface. It features a flexible sector architecture that supports sector sizes of 4/4/8/16/32KB/64x15 KB. The product offers fast erase and programming speeds, making it suitable for a variety of applications.

  • AMIC - A29L160A Series 2M X 8 Bit 1M X 16 Bit CMOS 3.3 Volt-only Boot Sector Flash Memory handbook

    A29L160A Series 2M X 8 Bit / 1M X 16 Bit CMOS 3.3 Volt-only, Boot Sector Flash Memory

  • AMIC A623308A Series 8K X 8 BIT CMOS SRAM handbook

    This is a document about the A623308A Series 8K X 8 BIT CMOS SRAM, describing its features and characteristics.

  • AMIC A29040B Series 512K X 8 Bit CMOS 5.0 Volt-only handbook

    A29040B Series 512K X 8 Bit CMOS 5.0 Volt-only, Preliminary Uniform Sector Flash Memory is a 5.0 volt single-voltage, flexible sector architecture pre-production flash memory chip.

  • AMIC A29L400A Series 512K X 8 Bit 256K X 16 Bit CMOS 3.0 Volt-only handbook

    The A29L400A Series is a 512K X 8 bit/256K X 16 bit CMOS 3.0 volt-only, boot sector flash memory. It features single power supply operation, flexible sector architecture, and low power consumption.

  • AMIC A25L16P Series DATA SHEET

    16Mbit low voltage serial flash memory, with 85MHz SPI bus interface, support fast read dual input-output mode

  • AMIC - A25L40P Series handbook

    This is a document about A25L40P series 4 Mbit low voltage serial flash memory. The product has a flash memory capacity of 4 Mbit, flexible sector architecture, support for bulk erase and sector erase functions, and high-speed page programming and SPI bus compatible serial interface. The product operates at a voltage of 2.7V to 3.6V with a maximum clock frequency of 85MHz. In addition, the product also features deep power-down mode and electronic signatures, etc.

  • AMIC A31W33128 Series LCD Controller-Driver handbook

    A31W33128 Series Preliminary LCD Controller-Driver is a CMOS LCD driver produced by AMIC Technology, Inc. It has 128 segments and 17 or 33 common graphic displays. It has 80/68 series 8-bit parallel and serial interface capability for operating with general CPU. The internal 65 x 128 display data RAM makes the display of both graphics and characters possible. Besides the general LCD driver features, it has on chip internal DC/DC converter/External Power supply, Dual/Triple booster, 2 internal Icon common Output systems, TCP package and Gold bumps.

  • AMIC A29040B Series handbook

    This is a preliminary document about A29040B Series 512K x 8 Bit CMOS 5.0 Volt-only Uniform Sector Flash Memory. The product features include 5.0V voltage, 8 uniform sectors, erasing and programming capabilities, support for full chip erase, etc.

  • AMIC A29L320A Series 4M X 8 Bit 2M X 16 Bit CMOS 3.0 Volt-only handbook

    This document introduces the features and characteristics of the A29L320A Series 4M X 8 Bit / 2M X 16 Bit CMOS 3.0 Volt-only, Boot Sector Flash Memory of AMIC Technology, Corp., including power supply, read and write timing, current, sector architecture, sector protection, embedded algorithms

  • AMIC A29010 Series Manual

    A29010 Series 128K X 8 Bit CMOS 5.0 Volt-only, Uniform Sector Flash Memory is a flash memory chip produced by AMIC Technology. This chip has a 5.0V ± 10% power supply range, 55/70/90 access time, 20 mA typical active read current, 30 mA typical program/erase current, 1 µA typical CMOS standby current and other features.

  • AMIC A42L8316 SERIES DATA SHEET

    A42L8316 is a new generation random access memory for graphics, organized in a 262,144-word by 16-bit configuration.

ManualLib.com

ManualLib.com is a comprehensive platform that offers an extensive collection of instruction manuals for a diverse range of products from around the globe. Our mission is to provide users with easy access to these manuals at all times and from any location, enabling them to make the most out of their purchases and improve their user experience.