ANALOG Manuals

This datasheet provides details on the features and characteristics of the 1.6 V, Micropower 12-/10-/8-Bit ADCs AD7466/AD7467/AD7468.

The AD9864 is a general-purpose IF subsystem that digitizes a low level 10 MHz to 300 MHz IF input signal. It has a wide range of applications, including multimode narrow-band radio products, analog/digital UHF/VHF FDMA receivers, TETRA, APCO25, GSM/EDGE portable and mobile radio products, and SATCOM terminals.

AD7791 is a low-power, buffered 24-bit Sigma-Delta ADC from Analog Devices. It features low power consumption, wide dynamic range, high resolution, and strong anti-interference ability. It can be widely used in smart transmitters, battery applications, portable instrumentation, temperature measurement, pressure measurement, and 4 to 20 mA loops.

AD7788/AD7789 are low power, 16-/24-bit Sigma-Delta ADCs. They feature a wide power supply range, low power consumption, high resolution, low noise, and high linearity. They are suitable for smart transmitters, battery applications, portable instrumentation, sensor measurement, temperature measurement, pressure measurement, and weigh scales.

The AD7679 is a 18-bit, 570 kSPS SAR ADC with ±2.5 LSB INL, no missing codes, and no pipeline delay (SAR architecture).

The AD7678 is a high performance, low power, low cost, 18-bit, 100 kSPS SAR ADC featuring low errors, high dynamic range, low noise and high accuracy.

AD7674 Rev. 0 is a high-performance 18-bit, 2.5 LSB INL, 800 kSPS SAR ADC from Analog Devices.

The AD7653 is a 16-bit, 1 MSPS, pulse SAR unipolar ADC with reference, operating from a single 5 V power supply. The part contains a high speed 16-bit sampling ADC, internal conversion clock, internal reference, error correction circuits, and both serial and parallel system interface ports. It features a very high sampling rate mode (Warp), a fast mode (Normal) for asynchronous conversion rate applications, and a reduced power mode (Impulse) for low power applications where power is scaled with the throughput. The AD7653 is fabricated using Analog Devices’ high performance, 0.6 micron CMOS process, with correspondingly low cost. It is available in a 48-lead LQFP and a tiny 48-lead LFCSP with operation specified from –40°C to +85°C.

AD9866 is a broadband modem mixed-signal front end with 12-bit D/A converter, 2×/4× interpolation filter, 200 MSPS DAC update rate, integrated 23 dBm line driver and 19.5 dB gain control, 12-bit, 80 MSPS A/D converter, -12 dB to +48 dB low noise RxPGA (< 2.5 nV/rtHz), third order programmable low-pass filter, flexible digital data path interface, half- and full-duplex operation, backward compatible with AD9975 and AD9876, various power-down/reduction modes, internal clock multiplier (PLL), 2 auxiliary programmable clock outputs, available in 64-lead chip scale package or bare die.

The document provides information about the features and characteristics of the broadband modem mixed-signal front end AD9865 Rev. A.

The document introduces the AD9863 Rev. A model of the mixed-signal front-end (MxFE™) baseband transceiver, which is suitable for broadband applications. The product features dual 12-bit, 50 MSPS analog-to-digital converters and dual 12-bit, 200 MSPS digital-to-analog converters with internal or external reference. It also includes programmable gain control and clock distribution block. Various data transfer modes can be configured through register programmability or optionally limited programmability through mode pins. The product also has independent Rx and Tx power-down control pins, and a 64-lead LFCSP package.

This file is AD9861 datasheet. AD9861 is a mixed-signal front-end (MxFE™) baseband transceiver launched by Analog Devices, mainly used for broadband applications.

The AD7661 is a 16-bit 100 kSPS PulSAR® unipolar ADC with a 2.5V internal reference, 100 kSPS throughput, and 16-bit resolution.

The AD7652 is a 16-bit, 500 kSPS unipolar ADC with an analog input voltage range of 0V to 2.5V. It has no pipeline delay and supports both parallel and serial interfaces. The ADC is suitable for applications such as data acquisition, instrumentation, digital signal processing, spectrum analysis, medical instruments, battery-powered systems, and process control.