MAXIM Manuals (Others)

The MAX3314E is a ±5V powered EIA/TIA-232 compatible interface. It has one transmitter and one receiver in a flow-through architecture. The transmitter output and the receiver input are protected to ±15kV using IEC 1000-4-2 Air-Gap Discharge, ±8kV using IEC 1000-4-2 Contact Discharge, and ±15kV using the Human Body Model. The transmitter has a low-dropout output stage providing minimum RS-232-compatible ±3.7V output levels while driving 3kΩ and 1000pF at 460kbps. Both +5V and -5V must be supplied externally. The MAX3314E has a SHDN function that reduces supply current to 1µA. The transmitter is disabled and put into tristate while the receiver remains active. The MAX3314E is available in 8-pin µMAX, SOT23, and SO packages.

File format: PDF Size:258 KB

The MAX3314 is a ±5V powered EIA/TIA-232-compatible interface. It has one transmitter and one receiver in a flow-through architecture. The transmitter has a low-dropout output stage providing minimum RS-232-compatible ±3.7V output levels while driving 3kΩ and 1000pf at 460kbps. Both +5V and -5V are supplied externally. The MAX3314 has a SHDN function that reduces supply current to 1µA. The transmitter is disabled and put into 3-state mode while the receiver remains active. The MAX3314 is available in 8-pin SOT23, µMAX and SO packages.

File format: PDF Size:209 KB

The MAX3301E/MAX3302E are TI's integrated USB On-the- Go (OTG) transceivers and charge pumps. The chip can enable mobile devices to directly connect to USB peripherals without the need of a host PC.

File format: PDF Size:887 KB

File format: PDF Size:245 KB

The MAX3286/MAX3296 series of products are high-speed laser drivers for fiber optic LAN transmitters optimized for Gigabit Ethernet applications. Each device contains a bias generator, laser modulator, and comprehensive safety features. Automatic power control (APC) adjusts the laser bias current to maintain average optical power at a constant level, regardless of changes in temperature or laser properties. For lasers without a monitor photodiode, these products offer a constant-current mode. The circuit can be configured for use with conventional shortwave (780nm to 850nm) or longwave (1300nm) laser diodes, as well as vertical-cavity surface-emitting lasers (VCSELs). The MAX3286 series (MAX3286–MAX3289) is optimized for operation at 1.25Gbps, and the MAX3296 series (MAX3296–MAX3299) is optimized for 2.5Gbps operation. Each device can switch 30mA of laser modulation current at the specified data rate. Adjustable temperature compensation is provided to keep the optical extinction ratio within specifications over the operating temperature range. This series of devices is optimized to drive lasers packaged in low-cost TO-46 headers. Deterministic jitter (DJ) for the MAX3286 is typically 22ps, allowing a 72% margin to Gigabit Ethernet DJ specifications. These laser drivers provide extensive safety features to guarantee single-point fault tolerance. Safety features include dual enable inputs, dual shutdown circuits, a...

File format: PDF Size:1459 KB

File format: PDF Size:0 KB

The MAX3293/MAX3294/MAX3295 low-power, high-speed transmitters for RS-485/RS-422 communication operate from a single +3.3V power supply. These devices contain one differential transmitter. The MAX3295 transmitter operates at data rates up to 20Mbps, with an output skew of less than 5ns, and a guaranteed driver propagation delay below 25ns. The MAX3293 (250kbps) and MAX3294 (2.5Mbps) are slew-rate limited to minimize EMI and reduce reflections caused by improperly terminated cables. The MAX3293/MAX3294/MAX3295 output level is guaranteed at +1.5V with a standard 54Ω load, compliant with RS-485 specifications. The transmitter draws 5mA of supply current when unloaded, and 1µA in low-power shutdown mode (DE = GND). Hot-swap circuitry eliminates false transitions on the data cable during circuit initialization or connection to a live backplane, and short-circuit current limiting and thermal-shutdown circuitry protect the driver against excessive power dissipation. The MAX3293/MAX3294/MAX3295 are offered in a 6-pin SOT23 package, and are specified over the automotive temperature range.

File format: PDF Size:330 KB

The MAX3291/MAX3292 are high-speed RS-485/RS-422 transceivers with preemphasis circuitry, suitable for long-distance communication. The data rates are programmable from 5Mbps to 10Mbps for MAX3291, and up to 10Mbps with a single external resistor for MAX3292. These devices are full-duplex, operate from a single +5V supply, and offer a low-current shutdown mode. They feature driver output short-circuit current limiting and a fail-safe receiver input that guarantees a logic-high output if the input is open circuit. A 1/4-unit-load receiver input impedance allows up to 128 transceivers on the bus.

File format: PDF Size:297 KB

MAX3291/MAX3292 are high-speed RS-485/RS-422 transceivers from Maxim Integrated Products. They feature driver preemphasis circuitry, which extends the distance and increases the data rate of reliable communication by reducing intersymbol interference (ISI) caused by long cables.

File format: PDF Size:297 KB

This document is about the reliability report of MAX3283EAUT product

File format: PDF Size:60 KB

MAX3280E/MAX3281E/MAX3283E/MAX3284E are single-channel RS-485/RS-422 receivers with excellent propagation delay and package-to-package skew time, making them ideal for multi-drop clock distribution applications.

File format: PDF Size:232 KB

File format: PDF Size:328 KB

This document is the technical data of MAX3275/MAX3277 transimpedance amplifiers, introduces the features and characteristics of the product, including the maximum data rate of 2.125Gbps, 300nA input-referred noise at 2.1GHz bandwidth (BW) with 0.85pF input capacitance, 2mAP-P AC input overload.

File format: PDF Size:1289 KB

The MAX3274 dual-rate Fibre Channel limiting amplifier is optimized for use in dual-rate 2.125Gbps/1.0625Gbps Fibre Channel optical receiver systems. An on-chip selectable fourth-order Bessel Thompson filter offers 15dB (typ) of attenuation at 2GHz to suppress the relaxation oscillation (RO) found in legacy transmitters. The amplifier accepts a wide range of input voltages and provides constant-level output voltages with controlled edge speeds. Receivers using the MAX3275/MAX3277 transimpedance amplifiers (TIA) and the MAX3274 dual-rate limiting amplifier can meet the Fibre Channel receiver sensitivity optical modulation amplitude (OMA) specification of 49mWP-P at 2.125Gbps and 31mWP-P at 1.0625Gbps. Additional features include a programmable threshold loss-of-signal (LOS) detector, output squelch, and bandwidth select. The MAX3274 features current-mode logic (CML) data outputs. The MAX3274 is available in a 16-pin QFN package, making it ideal for GBIC and small form-factor receiver modules.

File format: PDF Size:490 KB

The MAX3273 is a compact, low-power laser driver for applications up to 2.7Gbps. The device uses a single +3.3V supply and typically consumes 30mA. The bias and modulation current levels are programmed by external resistors. An automatic power-control (APC) loop is incorporated to maintain a constant average optical power over temperature and lifetime. The laser driver is fabricated using Maxim’s in-house, second-generation SiGe process. The MAX3273 accepts differential CML-compatible clock and data input signals. Inputs are self-biased to allow AC-coupling. An input data-retiming latch can be enabled to reject input jitter if a clock signal is available. The driver can provide bias current up to 100mA and modulation current up to 60mAP-P with typical (20% to 80%) edge speeds of 59ps. A failure-monitor output is provided to indicate when the APC loop is unable to maintain average optical power. The MAX3273 is available in a 4mm✕4mm, 24-pin QFN package, as well as in die form.

File format: PDF Size:997 KB

The MAX3272/MAX3272A is a 2.5Gbps limiting amplifier that uses a single +3.3V power supply and consumes only 33mA. It features 5ps deterministic jitter, 90ps edge speed, programmable loss of signal function, CML output interface, 20-pin 4mm x 4mm QFN or thin QFN package, and selectable output polarity.

File format: PDF Size:638 KB

File format: PDF Size:0 KB

The MAX3270 is a complete clock recovery and data retiming IC for 155Mbps and 622Mbps SDH/SONET and ATM applications.

File format: PDF Size:114 KB

The MAX3264/MAX3265/MAX3268/MAX3768/MAX3765 is a optical receiver from Texas Instruments. It supports transmission speed of 1.25Gbps and 2.5Gbps, and has low jitter and programmable loss-of-signal indication.

File format: PDF Size:360 KB

MAX3266/MAX3267 are 1.25Gbps/2.5Gbps, +3V to +5.5V, low-noise transimpedance preamplifiers for LANs. They feature 200nA/500nA input-referred noise, 920MHz/1900MHz bandwidth, and 1mA input overload.

File format: PDF Size:912 KB