ATMEL Manuals (Others)

The AT24C256B is a 256K (32,768 x 8) serial EEPROM that features low voltage and low power consumption. The device has a cascadable feature that allows up to eight devices to share a common two-wire bus. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The devices are available in space-saving 8-lead JEDEC PDIP, 8-lead JEDEC SOIC, 8-lead MAP, 8-lead Ultra Thin SAP, 8-lead TSSOP, and 8-ball dBGA2 packages. In addition, the entire family is available in a 1.8V (1.8V to 3.6V) version.

File format: PDF Size:796 KB

The AT27C010 is a low-power, high-performance 1,048,576-bit one-time programmable read-only memory (OTP EPROM) organized as 128K by 8 bits.

File format: PDF Size:281 KB

AT24C04B/08B is an 8-bit serial electrically erasable and programmable read-only memory (EEPROM) organized as 512/1024 words, each 8 bits. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT24C04B/08B is available in space-saving 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead Ultra-Thin Mini-MAP (MLP 2x3), 5-lead SOT23, 8-lead TSSOP and 8-ball dBGA2 packages.

File format: PDF Size:815 KB

The AT45DB011D is a 2.7V, serial-interface Flash memory ideally suited for a wide variety of digital voice-, image-, program code- and data-storage applications. The AT45DB011D supports RapidS serial interface for applications requiring very high speed operations. RapidS serial interface is SPI compatible for frequencies up to 66 MHz. Its 256 byte page size and flexible erase options make it ideal for large-capacity data storage applications. It also features low power consumption and high data retention.

File format: PDF Size:1372 KB

AT45DB321D is a 2.7-volt, serial-interface sequential access Flash memory ideally suited for a wide variety of digital voice-, image-, program code- and data-stor- age applications. The AT45DB321D supports RapidS serial interface for applications requiring very high speed.

File format: PDF Size:1646 KB

AT24C02B is a 2K (2048 bits) serial electrically erasable and programmable read-only memory (EEPROM) produced by Microchip

File format: PDF Size:722 KB

This document introduces the features and characteristics of ATmega8L88P

File format: PDF Size:410 KB

AT24C128B is a 128K (16,384x8) serial electrically erasable and programmable read-only memory (EEPROM) with 1.8V (VCC = 1.8V to 5.5V) and 2.5V (VCC = 2.5V to 5.5V) compatibility. The device is available in 8-lead JEDEC PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini MAP, 8-lead Ultra Lead Frame Land Grid Array (ULA), 8-lead TSSOP and 8-ball dBGA2 packages.

File format: PDF Size:1008 KB

This document describes the features and characteristics of a high-performance, low-power AVR® 8-bit microcontroller, including advanced RISC architecture, nonvolatile program and data memories, peripheral features, and special microcontroller features.

File format: PDF Size:257 KB

AT29C020 is a 5-volt-only in-system Flash programmable and erasable read-only memory (PEROM) manufactured by Atmel. It has 2 megabits of memory organized as 262,144 bytes. The device offers access times to 70 ns with power dissipation of just 220 mW over the commercial temperature range. When the device is deselected, the CMOS standby current is less than 100 µA. Device endurance is such that any sector can typically be written to in excess of 10,000 times. To allow for simple in-system reprogrammability, the AT29C020 does not require high input voltages for programming. Five-volt-only commands determine the operation of the device. Reading data out of the device is similar to reading from an EPROM. Reprogramming the AT29C020 requires the use of special commands, which are explained in this document.

File format: PDF Size:353 KB

This product is a high-performance, low-power AVR® 8-bit microcontroller with advanced RISC architecture, 130 powerful instructions, single-clock cycle execution, 32×8 general-purpose working registers, fully static operation, up to 16 MIPS throughput at 16 MHz clock frequency, on-chip 2-cycle multiplier, 8K bytes of In-System Self-programmable Flash program memory, 512 bytes EEPROM, 1K byte internal SRAM, 10,000 Flash/100,000 EEPROM write/erase cycles, 20 years at 85°C/100 years at 25°C(1) data retention time, optional boot code section with independent lock bits, In-System Programming by On-chip Boot Program, true read-while-write operation, programming lock for software security

File format: PDF Size:4658 KB

The AT26DF321 is a serial interface Flash memory device designed for use in a wide variety of high-volume consumer based applications in which program code is shad- owed from Flash memory into embedded or external RAM for execution. The flexible erase architecture of the AT26DF321, with its erase granularity as small as 4-Kbytes, makes it ideal for data storage as well, eliminating the need for additional data storage EEPROM devices. The physical sectoring and the erase block sizes of the AT26DF321 have been opti- mized to meet various application requirements.

File format: PDF Size:572 KB

AT28C64B is a high-performance electrically-erasable and programmable read- only memory (EEPROM). Its 64K of memory is organized as 8,192 words by 8 bits. Manufactured with Atmel’s advanced nonvolatile CMOS technology, the device offers access times to 150 ns with power dissipation of just 220 mW. When the device is deselected, the CMOS standby current is less than 100 µA. The AT28C64B is accessed like a Static RAM for the read or write cycle without the need for external components. The device contains a 64-byte page register to allow writing of up to 64 bytes simultaneously. During a write cycle, the addresses and 1 to 64 bytes of data are internally latched, freeing the address and data bus for other operations. Following the initiation of a write cycle,

File format: PDF Size:300 KB

AT91SAM7A3-EK Evaluation Board is an evaluation board that can be used for evaluation and development of applications based on AT91SAM7A3

File format: PDF Size:451 KB

Atmel ATAVRMC100 BLDC motor control evaluation kit is an evaluation tool and development board for the AT90PWM3 AVR microcontroller from Atmel. The board includes power bridges for BLDC motors and can realize zero crossing voltage detection, hardware overcurrent detection and PWM output.

File format: PDF Size:149 KB

File format: PDF Size:0 KB

This document describes the features and characteristics of a high-performance, low-power AVR® 8-bit microcontroller. It utilizes an advanced RISC architecture with a powerful instruction set and single-clock cycle execution. The microcontroller has nonvolatile program and data memories, as well as various peripheral features including timers/counters, PWM channels, ADC, and serial interfaces. Additionally, it includes a JTAG interface and software security lock.

File format: PDF Size:2804 KB

AVR Butterfly User Guide describes the features and usage of AVR Butterfly evaluation kit.

File format: PDF Size:521 KB

File format: PDF Size:0 KB

This document describes a high-performance, low-power AVR® 8-bit microcontroller with advanced RISC architecture, non-volatile program and data memories, peripheral features, JTAG interface, and other characteristics.

File format: PDF Size:3049 KB