ATMEL Manuals (Others)

This document describes the communication protocol used between AVR Studio and JTAGICE mkII.

File format: PDF Size:679 KB

This product is a 256-Kbit (32-Kbyte) EEPROM User Memory with 16 2-Kbyte (16-Kbit) Zones, self-timed write cycle, single byte or 128-byte page write mode and programmable access rights. It also features a 2-Kbit Configuration Zone, 37-byte OTP Area and 160-byte Area.

File format: PDF Size:502 KB

This document describes the features and characteristics of the AT34C02C model, including permanent and reversible software write protection, hardware write protection, standard-voltage operation, internal organization, two-wire serial interface, Schmitt trigger with filtered inputs, bidirectional data transfer protocol, 400 kHz compatibility, 16-byte page write modes, partial page writes, self-timed write cycle, and high reliability.

File format: PDF Size:478 KB

AT24C32A/64A is a 32,768/65,536-bit serial electrically erasable and programmable read only memory (EEPROM) organized as 4096/8192 words of 8 bits each. The device's cascadable feature allows up to 8 devices to share a common two-wire bus. The device is optimized for use in many automotive applications where low power and low voltage operation are essential. AT24C32A/64A is available in space saving 8-lead JEDEC SOIC and 8-lead TSSOP packages and is accessed via a 2-wire serial interface and is available in a 2.7V (2.7V to 5.5V) version.

File format: PDF Size:380 KB

AT25128A/256A is a serial electrically-erasable programmable read-only memory (EEPROM) with features such as SPI compatibility, standard-voltage operation, automotive temperature range, and high reliability.

File format: PDF Size:487 KB

The AT93C56A/66A is a high-reliability automotive application electrically erasable programmable read-only memory (EEPROM) with 2048/4096 bits of storage capacity, can work in the voltage range of 2.7V to 5.5V, and the operating temperature range is -40°C to 125°C. The device uses a three-wire serial interface, has a clock rate of 2MHz and a self-timed write cycle (10ms maximum), and can be enabled through the Chip Select (CS) pin.

File format: PDF Size:550 KB

The document describes the features and characteristics of the AT93C86A EEPROM, including medium-voltage and standard-voltage operation, automotive temperature range, user selectable internal organization, serial interface, sequential read operation, noise suppression, high reliability, etc.

File format: PDF Size:481 KB

The AT24C256C is a product that provides 262,144 bits of serial electrically erasable and programmable read-only memory (EEPROM) organized as 32,768 words of 8 bits each. The device's cascadable feature allows up to eight devices to share a common two-wire bus. The product is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The devices are available in various package options. Additionally, the entire family is available in a 1.8V version.

File format: PDF Size:494 KB

AT24C02B is Microchip's 2Kbit EEPROM, which can be used in many industrial and commercial applications and is suitable for applications that require low power and low voltage operation. The device has 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead Ultra Thin Mini-MAP (MLP 2x3), 5-lead SOT23, 8-lead TSSOP and 8-ball dBGA2 package.

File format: PDF Size:723 KB

AT24C04B/08B is a low-voltage and low-power serial electrically erasable and programmable read-only memory (EEPROM) produced by Atmel company, with 4K(512x8) and 8K(1024x8) capacity, and can be used in various industrial and commercial applications.

File format: PDF Size:815 KB

The AT24C32C/64C is a serial electrically erasable and programmable read-only memory (EEPROM) with low power and low voltage operation. It provides 32,768/65,536 bits of storage space and is accessed via a 2-wire serial interface. The device is suitable for many industrial and commercial applications.

File format: PDF Size:860 KB

AT24C128B is a 131,072-bit serial electrically erasable and programmable read-only memory (EEPROM) organized as 16,384 words of 8 bits each. It has low-power and low-voltage operation features.

File format: PDF Size:1069 KB

AT24C256B is a low-power, low-voltage 262,144-bit serial electrically erasable and programmable read-only memory (EEPROM), organized as 32,768 words of 8 bits each. The device's cascadable feature allows up to eight devices to share a common two-wire bus. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential.

File format: PDF Size:780 KB

AT24C1024B is a serial electrically erasable and programmable read-only memory (EEPROM) with an internal organization of 131,072 words of 8 bits each. It supports two-wire serial interface, low-voltage operation, noise suppression, bidirectional data transfer, and other features. It is optimized for low-power and low-voltage applications in industrial and commercial settings. The device is available in various packages and voltage versions.

File format: PDF Size:1567 KB

The AT25010A/020A/040A series is a low-power, low-voltage version of the AT25010 series that provides 1024/2048/4096 bits of programmable read-only memory (EEPROM) organized as 128/256/512 words of 8 bits each. The series is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential.

File format: PDF Size:378 KB

The AT25080A/160A/320A/640A is a serial electrically-erasable programmable read-only memory (EEPROM) from Microchip, offering 8192/16384/32768/65536 bits of storage space, and is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential.

File format: PDF Size:526 KB

The AT25128A/256A is a 131,072/262,144-bit serial electrically erasable programmable read-only memory (EEPROM) organized as 16,384/32,768 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The devices are available in space-saving 8-lead PDIP, 8-lead EIAJ SOIC, 8-lead JEDEC SOIC, 8-lead TSSOP, 8-ball dBGA2, and 8-lead Ultra Thin SAP packages.

File format: PDF Size:537 KB

This datasheet describes the features and characteristics of the AT25320B/640B device. The device is a serial electrically-erasable programmable read-only memory (EEPROM) with a capacity of 32768/65536 bits and an organization of 4096/8192 8-bit words. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential.

File format: PDF Size:729 KB

AT25080B/160B is 8192/16384 bits serial electrically-erasable programmable read-only memory (EEPROM) organized as 1024/2048 words of 8 bits each, optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential.

File format: PDF Size:621 KB

AT25512 is a serial electrically-erasable programmable read only memory (EEPROM) of 524,288 bits organized as 65,536 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The device is available in space saving 8-lead JEDEC SOIC, 8-lead TSSOP and 8-lead SAP packages. In addition, the entire family is available in 1.8V (1.8V to 5.5V) versions. AT25512 is enabled through the Chip Select pin (CS) and accessed via a 3-wire interface consisting of Serial Data Input (SI), Serial Data Output (SO) and Clock signal (SCK).

File format: PDF Size:599 KB