ANALOG Manuals (Others)

The AD9054A is an 8-bit monolithic analog-to-digital converter optimized for high speed, low power, small size and ease of use. With a 200 MSPS encode rate capability and full-power analog bandwidth of 350 MHz, the component is ideal for applications requiring the highest possible dynamic performance.

File format: PDF Size:302 KB

This document is the AD9432 datasheet. The AD9432 is a 12-bit, 80 MSPS/105 MSPS ADC with an on-chip reference and track-and-hold circuit, which enables high accuracy and high speed conversion.

File format: PDF Size:511 KB

The AD9244 is a 14-bit, 40 MSPS/65 MSPS ADC that features low power, high accuracy, and high dynamic range.

File format: PDF Size:1194 KB

The AD7732 is a high precision, high throughput analog front end from TI, which features 24-bit resolution, 2 fully differential analog input channels, single supply operation, support 5V or 3V digital supply, SPI, QSPI, MICROWIRE, DSP compatible interface. It can be used in PLC/DCS, multiplexing applications, process control, industrial instrumentation and other occasions.

File format: PDF Size:411 KB

The AD7653 is a 16-bit, 1 MSPS, unipolar ADC with an analog input voltage range of 0V to 2.5V, no pipeline delay, and parallel and serial 5V/3V interface compatibility.

File format: PDF Size:804 KB

The AD7452 is a 12-bit, high speed, low power, successive approximation (SAR) analog-to-digital converter (ADC) that features a fully differential analog input. This part operates from a single 3 V or 5 V power supply and has a maximum 555 kSPS input rate with 70 dB SINAD.

File format: PDF Size:658 KB

AD7912/AD7922 are 10-bit and 12-bit, high speed, low power, 2-channel successive approximation ADCs, with 1 MSPS conversion rate, 2.35 V to 5.25 V supply range and 1 µA standby current.

File format: PDF Size:387 KB

The AD7787 is a low-power, complete analog front end for low frequency measurement applications. It contains a low noise, high resolution 24-bit Σ-∆ ADC, and a single-channel, gain adjustable, with internal reference and VREF monitor function analog front end amplifier.

File format: PDF Size:327 KB

The AD9444 is a 14-bit monolithic, sampling analog-to-digital converter (ADC) with an on-chip, track-and-hold circuit. It operates at a guaranteed sampling rate of 80 MSPS and offers excellent linearity, low power dissipation, and support for various applications such as multicarrier, multimode cellular receivers, antenna array positioning, power amplifier linearization, broadband wireless, radar, and infrared imaging.

File format: PDF Size:1292 KB

AD9868 is a low-cost 3.3V CMOS mixed-signal front end for broadband modems. It features a 10-bit DAC converter, 2x/4x interpolation filter, 200 MSPS DAC update rate, an integrated 17 dBm line driver with 19.5 dB gain control, a 10-bit, 80 MSPS, ADC converter, -12 dB to +48 dB low noise RxPGA (<3 nV/√Hz), a third-order programmable low-pass filter, a flexible digital data path interface, half- and full-duplex operation, pin compatibility with the AD9865, various power-down/reduction modes, an internal clock multiplier (PLL), and 2 auxiliary programmable clock outputs. It is suitable for broadband wireline networking.

File format: PDF Size:831 KB

This product is a 10-bit, 200 MSPS/250 MSPS/300 MSPS, 1.8 V analog-to-digital converter with excellent linearity and low power consumption.

File format: PDF Size:1406 KB

This document describes the features and characteristics of the AD9869 Rev. A broadband modem mixed-signal front end, including a 12-bit DAC converter, 2×/4× interpolation filter, 200 MSPS DAC update rate, integrated 17 dBm line driver, etc.

File format: PDF Size:574 KB

AD7983 is a 16-bit, 1.33 MSPS PulSAR ADC with no missing codes, low power dissipation, high precision, wide input range and single-supply operation.

File format: PDF Size:449 KB

AD9268 is a 16-bit, 80 MSPS/105 MSPS/125 MSPS, 1.8 V dual analog-to-digital converter (ADC) with a signal-to-noise ratio (SNR) greater than 70 dBFS, a peak-to-peak dynamic range (SFDR) of 88 dBc, and a low power consumption of 750 mW (at 125 MSPS).

File format: PDF Size:2286 KB

File format: PDF Size:0 KB

AD5424/AD5433/AD5445 are 8/10/12-bit, high bandwidth, multiplying DACs with parallel interface from Analog Devices. Features include 2.5 V to 5.5 V supply operation, fast parallel interface (17 ns write cycle), 10 MHz multiplying bandwidth, -10 V reference input, extended temperature range -40�C to +125�C, 20-lead TSSOP and chip scale (4 mm x 4 mm) packages, etc.

File format: PDF Size:889 KB

The AD7609 is an 8-channel differential DAS with an 18-bit, bipolar, simultaneous sampling ADC. It features 8 simultaneously sampled inputs, true differential inputs, true bipolar analog input ranges, a single 5V analog supply, and a VDRIVE ranging from 2.3V to 5.25V. The product also includes a fully integrated data acquisition solution, analog input clamp protection, an input buffer with a 1MΩ analog input impedance, a second-order antialiasing analog filter, an on-chip accurate reference and reference buffer, an 18-bit ADC with 200kSPS on all channels, and oversampling capability with a digital filter.

File format: PDF Size:793 KB

AD9253 is a Quad, 14-Bit, 80 MSPS/105 MSPS/125 MSPS Serial LVDS 1.8 V Analog-to-Digital Converter. It features 1.8 V supply operation, low power consumption, high signal-to-noise ratio, low non-linearity, etc. It is suitable for applications such as medical ultrasound, high-speed imaging, quadrature radio receivers, etc.

File format: PDF Size:1269 KB

The AD7988-1/AD7988-5 are 16-bit lower power PulSAR ADCs from Analog Devices. They offer 100 kSPS and 500 kSPS conversion rates, and ±0.6 LSB typical I / N and 91.5 dB typical S / N. AD7988-1/AD7988-5 use a pseudo-differential input that can be input from 0 V to VREF, with VREF ranging from 2.5 V to 5.5 V. They support 1.8 V to 5 V logic interface and provide SPI-/QSPI-/MICROWIRE™-/DSP compatible serial interface. The AD7988-1/AD7988-5 use a 10-pin MSOP and a 10-pin LFCSP package, which can meet the needs of a variety of applications.

File format: PDF Size:463 KB

The document describes the features and characteristics of the AD7952, a 14-bit, 1 MSPS, differential, programmable input PulSAR® ADC. The ADC offers multiple programmable input ranges through pins or a serial SPI®-compatible interface. It has a throughput of 1 MSPS (warp mode) and a resolution of 14 bits with no missing codes. It features low INL, high SNR, and utilizes the iCMOS® process technology. The ADC includes a 5V internal reference with low drift, a temperature output, and has no pipeline delay due to its SAR architecture. It supports both parallel and serial interfaces and has low power dissipation. The AD7952 is suitable for applications such as process controls, medical instruments, and high-speed data acquisition.

File format: PDF Size:849 KB