Key facts
- Brand
- Buhler
- Model
- EGK4
- Industry
- Industrial
- Documents
- 2
- Languages
- ZH
- Last added
- 2011-10-29
Start here
Buhler EGK4S Gas Condenser Installation and User Manual
The EGK4S gas condenser is designed for gas analysis systems, providing cooling and condensation of sample gases. It must be installed and operated according to the specifications and safety guidelines outlined in this document.
The manual covers safety notices, installation and electrical connections, operation and menu functions, maintenance, fault troubleshooting, and end‑of‑life disposal. It also includes technical specifications and ordering information for accessories. This manual is written in Chinese.
Buhler EGK4 specifications
| Cooling capacity (at 25 °C) | 800 kJ/h |
|---|---|
| Power supply | 115 V or 230 V, 50/60 Hz |
| Power consumption | 170 VA / 500 VA |
| Fuse rating | 10 A |
| Dimensions | ≈510 × 355 × 450 mm |
| Weight | ≈38 kg |
| Refrigerant | R134a |
Source: Bühler EGK4 Gas Condenser Installation and Operating Manual
All Buhler EGK4 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What safety precautions are required for installing the EGK4 gas condenser?
The equipment must be installed by qualified personnel, follow all safety notes, keep at least 10 cm clearance on each side, use original parts, avoid explosive atmospheres and wear protective gloves, mask and goggles as described.
From: Bühler EGK4 Gas Condenser Installation and Operating Manual
What clearance is required around the EGK4 condenser?
A minimum clearance of 10 cm (4 inches) must be maintained on both sides of the condenser to ensure free air flow.
From: Bühler EGK4 Gas Condenser Installation and Operating Manual
What ambient temperature range is allowed for operating the EGK4S?
The device may be used in ambient temperatures from +5 °C to +50 °C.
From: Buhler EGK4S Gas Condenser Installation and User Manual
What fuse rating should be used for the power connection?
A 10 A fuse is specified for the power supply.
From: Buhler EGK4S Gas Condenser Installation and User Manual