TSC Manuals

The TS3404 is a PWM buck controller chip that has a PWM control circuit, 1.25V reference output, error amplifier, adjustable oscillator, soft start, under voltage lockout (UVLO), short circuit protection (SCP) circuit, and support DIP-8 and SOP-8 package.

The TS324 is a quad channel operational amplifier with a supply voltage range of 3V to 32V. It features low power consumption, single supply operation, internal frequency compensation, and is suitable for various applications.

The TS317L is an adjustable 3-terminal positive voltage regulator capable of supplying in excess of 100mA over an output voltage range of 1.25 V to 37 V.

The TS317 is an adjustable 3-terminal positive voltage regulator capable of supplying in excess of 1.5A over an output voltage range of 1.25 V to 37 V. This voltage regulator is exceptionally easy to use and require only two external resistors to set the output voltage. Further, it employs internal current limiting, thermal shutdown and safe area compensation, making it essentially blow-out proof. The TS317 is offered in 3-pin TO-220, TO-263, TO-252 and SOT-223 package.

The TS31002 is a telephone bell replacement with low current drain, adjustable 2-frequency tone, adjustable warbling rate, extension tone ringer modules, alarms or other alerting devices

TS25P01G THRU TS25P07G Single Phase 25.0 AMPS. Glass Passivated Bridge Rectifiers, Voltage Range 50 to 1000 Volts, Current 25.0 Amperes. Features: UL Recognized File # E-96005, Glass passivated junction, Ideal for printed circuit board, Reliable low cost construction, Plastic material has Underwriters Laboratory Flammability Classification 94V-0, Surge overload rating to 300 amperes peak, High case dielectric strength of 2000 VRMS, Isolated voltage from case to lead over 2500 volts. Mechanical data: Case: Molded plastic, Terminals: Leads solderable per MIL-STD-750, method 2026, Weight: 0.3 ounce, 8 grams, Mounting torque: 8.17 in. lbs. max. TS-6P Dimensions in inches and (millimeters). Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Type Number Symbol TS25P 01G TS25P 02G TS25P 03G TS25P 04G TS25P 05G TS25P 06G TS25P 07G Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560

The TS2596 is a 3A step-down switching voltage regulator from Taiwan Toshiba. It supports a maximum output current of 3A and fixed output voltages of 3.3V and 5V, as well as an adjustable output voltage.

The TS650 is a monolithic buck switching regulator with features such as high output driving current up to 500mA, adjustable current limit, and variable oscillation frequency. It is suitable for applications such as chargers, xD-ROM, and xDSL product DC-DC converters.

The TS803R is a microprocessor reset circuit from Samsung company. The circuit can monitor the power supplies in µP and digital systems, and has the characteristics of high reliability and low cost. The circuit can break the VCC power supply voltage, and keep it for at least 140ms. The circuit has three output configurations, the output current is 3uA, and the reset is valid to Vcc = +1V. The circuit does not require external components.

This manual provides information about GSV 009-016 Grease Fan product, including installation, operation, etc.

The TS278R00 series is a low-dropout voltage regulator suitable for various electronic equipment. It provides constant voltage power source with ITO-220 4 lead full mold package. The dropout voltage of TS278R00 series is below 0.5V in full rated current (2A). This regulator has various functions such as a peak current protection, thermal shut down, over voltage protection and an output disable function.

TS2207A/B series are protection ICs designed to safe guard one-cell Lithium-ion battery pack against over charge/discharge, over current and short circuit. The TS2207A/B series use advanced high voltage CMOS process to provide high accuracy voltage detection and low current consumption.

TS20P01G THRU TS20P07G Single Phase 20.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 20.0 Amperes Features UL Recognized file # E-96005 Glass passivated junction Ideal for printed circuit board Reliable low cost construction Plastic material has Underwriters Laboratory Flammability Classification 94V-0 Surge overload rating to 250 amperes peak High case dielectric strength of 2000 VRMS

The TS2026 is a high-side MOSFET switch optimized for general-purpose power distribution requiring circuit protection.