This page provides manuals, user guides, handbooks, instructions, specification, instruction, maintenance manual for ST Anti-Theft Devices, Electronic Original, ...
M74HC368 is a high speed CMOS HEX BUS BUFFER with 3-STATE OUTPUTS fabricated with silicon gate C2MOS technology. This device contains six buffers, four buffers are controlled by an enable input (G1) and the other two buffers are controlled by the other enable input (G2); the outputs of each buffer group are enabled when G1 and/or G2 inputs are held low, and when held high, these outputs are disabled in a high-impedance state. All inputs are equipped with protection circuits against static discharge and transient excess voltage.
74LVC245A is a low voltage CMOS octal bus transceiver (3-state) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for 1.65 to 3.6 VCC operations and low power and low noise applications. This IC is intended for two-way asynchronous communication between data buses and the direction of data transmission is determined by DIR input. The enable input G can be used to disable the device so that the buses are effectively isolated. It has more speed performance at 3.3V than 5V AC/ACT family, combined with a lower power consumption. All inputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage. All floating bus terminals during High Z State must be held HIGH or LOW.
The 74LVC244A is a low voltage CMOS OCTAL BUS BUFFER (3-STATE) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for 1.65 to 3.6 VCC operations and low power and low noise applications. It can be interfaced to 5V signal environment for inputs in mixed 3.3/5V system. G control output governs four BUS BUFFERs. This device is designed to be used with 3 state memory address drivers, etc. It has more speed performance at 3.3V than 5V AC/ACT family, combined with a lower power consumption. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.
The document describes the features and characteristics of the 74LVC125A low voltage CMOS quad bus buffer. It is suitable for voltage operations from 1.65 to 3.6V and is ideal for low power and low noise applications. It can be interfaced with a 5V signal environment for inputs in mixed 3.3/5V systems. The device requires the same 3-STATE control input G to be set high in order to put the output into a high impedance state. It has higher speed performance at 3.3V compared to the 5V AC/ACT family, while consuming lower power. All inputs and outputs are equipped with protection circuits against static discharge, providing them with 2KV ESD immunity and transient excess voltage.
The 74LVC32A is a low voltage CMOS QUAD 2-input OR gate fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for 1.65 to 3.6 VCC operations and low power and low noise applications. It can be interfaced to 5V signal environment for inputs in mixed 3.3/5V system. It has more speed performance at 3.3V than 5V AC/ACT family, combined with a lower power consumption. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.
The 74LVC08A is a low voltage CMOS QUAD 2-INPUT AND GATE fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for 1.65 to 3.6 VCC operations and low power and low noise applications. It can be interfaced to 5V signal environment for inputs in mixed 3.3/5V system. It has more speed performance at 3.3V than 5V AC/ACT family, combined with a lower power consumption. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.
74LVC14A is a low voltage CMOS six inverter with 5V input tolerance, high speed, low power consumption, low noise, good ESD performance and other characteristics.
The 74LCX541 is a low voltage CMOS octal bus buffer (non-inverted) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology.
74LCX139 is a low voltage CMOS dual 2 to 4 line Decoder / Demultiplexer fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power and high speed 3.3V applications; it can be interfaced to 5V signal environment for inputs. The active low enable input can be used for gating or as a data input for demultiplexing applications. While the enable input is held high, all four outputs are high independently of the other inputs. It has same speed performance at 3.3V than 5V AC/ACT family, combined with a lower power consumption. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.
The 74VHCT238A is an advanced high-speed CMOS 3-to-8 line decoder fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It features high speed, low power dissipation, compatibility with TTL outputs, and can be used for 5V to 3V interfaces.
The 74VHCT138A is an advanced high-speed CMOS 3 TO 8 LINE DECODER (INVERTING) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology.
The 74LVX74 is a low voltage CMOS dual D-type flip-flop with preset and clear non-inverting. It is ideal for low power, battery operated, and low noise 3.3V applications. It combines high-speed performance with true CMOS low power consumption. All inputs and outputs are equipped with protection circuits against static discharge, providing 2KV ESD immunity and transient excess voltage.
