ST Manuals

This datasheet provides detailed information on the STM8L052R8, including operating conditions, low power features, advanced STM8 core, reset and supply management, clock management, low power RTC, LCD, memories, DMA and 12-bit ADC.

This document introduces a new product called STM32F302xx STM32F303xx, which is an ARM Cortex-M4 32-bit microcontroller with high performance and low power consumption. The microcontroller features an ARM 32-bit Cortex-M4 CPU with single-cycle multiplication and hardware division, as well as DSP instruction with FPU (floating-point unit) and MPU (memory protection unit). It has 128 to 256KB of Flash memory and 40KB of SRAM memory, supports various clock management and low power modes, and is suitable for a wide range of applications.

This document provides information on a product in full production, introducing the features and characteristics of the STM8L051F3 Value Line, an 8-bit ultralow power MCU with 8-KB Flash, 256-byte data EEPROM, RTC, timers, USART, I2C, SPI, and ADC. It covers operating conditions, low power features, advanced STM8 core, reset and supply management, clock management, low power RTC, memories, DMA, 12-bit ADC, and timers.

The STM8L101xx is an 8-bit ultralow power microcontroller with features including multifunction timers, comparators, USART, SPI, and I2C. It operates at a supply voltage range of 1.65V to 3.6V and offers low power consumption, high performance, and a wide temperature range. It supports up to 8 Kbytes of Flash program and up to 2 Kbytes of data EEPROM with flexible write and read protection modes. In addition, it provides various clock management, reset and supply management, interrupt management, I/Os, and other peripherals.

STM8S103K3 STM8S103F3 STM8S103F2 Access line, 16 MHz STM8S 8-bit MCU, up to 8 Kbytes Flash, data EEPROM,10-bit ADC, 3 timers, UART, SPI, I²C. LQFP32 7x7 UFQFPN32 5x5 TSSOP20 UFQFPN20 3x3 SO20W 300 mils SDIP32 400 mils

STM8S103x series is a 16-bit microcontroller based on the advanced STM8 core with a clock frequency up to 16MHz, integrated with 8K bytes of Flash program storage, 640 bytes of data EEPROM, 10-bit ADC, 3 timers, UART, SPI, I²C and other peripherals. It operates at a voltage range of 2.95 to 5.5V, and has flexible clock control, low power mode, power management, interrupt management, watchdog timer, wake-up timer, buzzer, single-wire interface module (SWIM) and debugging module (DM) and other characteristics, suitable for consumer electronics, industrial control, medical equipment and other fields.

STM8S903K3 and STM8S903F3 are 16 MHz STM8S 8-bit MCUs with 8 Kbytes Flash, 1 Kbyte RAM, 640 bytes EEPROM, 10-bit ADC, 2 timers, UART, SPI, I²C, and other features.

The STM8T141 is a single-channel capacitive sensor for touch or proximity detection with shielded sensing electrode.

This document provides detailed information about a product released in April 2012, including its model, processor type, storage capacity, interfaces, and other features.

This document describes the features of the STM8L151x4, STM8L151x6, STM8L152x4, and STM8L152x6 8-bit ultralow power MCU, including RTC, LCD, timers, USART, I2C, SPI, ADC, DAC, and comparators.

This document introduces a high-performance wireless system-on-chip called STM32W108 with 256KB of embedded Flash memory. The chip features a 32-bit ARM Cortex-M3 processor, a 2.4GHz IEEE 802.15.4 transceiver with lower MAC protocol, and 128/192/256KB Flash memory with 8/12/16KB RAM. It includes an AES128 encryption accelerator, flexible ADC, SPI/UART/I2C serial communications, general-purpose timers, and 24 highly configurable GPIOs with Schmitt trigger inputs. The chip is powered by the industry-leading ARM Cortex-M3 processor, delivering exceptional processing performance and efficiency with the Thumb-2 instruction set. It operates at frequencies of 6, 12, or 24MHz. The chip offers low power consumption and advanced power management, supporting low deep sleep current with retained RAM and GPIO. It also features low-frequency and high-frequency internal RC oscillators for sleep timing and fast processor start-up. In terms of RF performance, it provides exceptional link budget, sensitivity, and output power, with configurable options.

This is a 32-bit MCU based on ARM, with the model number STM32F101xF/STM32F101xG, with 768KB to 1MB of Flash, 15 timers, 1 ADC and 10 communication interfaces.

This document provides information on a new product called STM32F103xF STM32F103xG, which is a high-performance ARM-based 32-bit microcontroller. It features 768KB to 1MB Flash memory, USB, CAN, 17 timers, 3 ADCs, and 13 communication interfaces.

STM32F215xx/STM32F217xx series ARM-based 32-bit MCU, 150DMIPs, up to 1MB Flash/128+4KB RAM, crypto, USB OTG HS/FS, Ethernet, 17 TIMs, 3 ADCs, 15 comm. interfaces & camera

This document introduces the STM32L151xx and STM32L152xx series of ultralow power ARM-based 32-bit MCUs. The products feature up to 128 KB Flash memory, RTC, LCD, USB, USART, I2C, SPI, timers, ADC, DAC, comparators, and more.