TEXAS Manuals (Others)

The XTR117 is a precision current output converter designed to transmit analog 4-20mA signals over an industry-standard current loop. It provides accurate current scaling and output current limit functions.

File format: PDF Size:646 KB

The BUF04701 is a low-power, high-voltage, four-channel buffer from TI with a working voltage range of 3.5V to 12V, a 3dB bandwidth of 8MHz and a slew rate of 10V/µs. It draws only 1.1mA of quiescent current.

File format: PDF Size:453 KB

The TPS40192/3 are cost-optimized synchronous buck controllers that operate from 4.5 V to 18 V input. These controllers implement a voltage-mode control architecture with the switching frequency fixed at either 600 kHz (TPS40192) or 300 kHz (TPS40193). The higher switching frequency facilitates the use of smaller inductor and output capacitors, thereby providing a compact power-supply solution. An adaptive anti-cross conduction scheme is used to prevent shoot through.

File format: PDF Size:790 KB

CC2500 is a low cost true single chip 2.4 GHz transceiver designed for very low power wireless applications. Applications include 2400-2483.5 MHz ISM/SRD band systems, consumer electronics, wireless game controllers, wireless audio and wireless keyboard and mouse.

File format: PDF Size:1060 KB

File format: PDF Size:0 KB

This manual introduces the functions and usage of TI digital audio products

File format: PDF Size:77 KB

This document describes the features and applications of the TPA5050 digital amplifier, as well as its use in high-definition TVs and flat panel TVs. The product accepts a single serial audio input, buffers the data, and outputs delayed audio data to synchronize with the video stream.

File format: PDF Size:897 KB

This user’s guide provides operational information associated with TI digital audio products. This guide covers the following topics: product overview, circuit connections, usage advice, troubleshooting, and technical specifications.

File format: PDF Size:62 KB

SLAS382 is a single-channel codec with noise-shaped Delta Sigma ADC and DAC technology, low supply voltage and current: – 1.3 V typical power supply – 350 µA typical supply current drain – Power supply up monitor and low battery monitor that also automatically shuts off H-bridge output when battery decays below 1.05 V in a nontransient manner.

File format: PDF Size:693 KB

This document introduces the features and characteristics of the PCM3793/PCM3794 chip. It is a low-power stereo audio codec with microphone bias, headphone and digital speaker amplifier. The chip supports 2 or 3 wire serial control, supports multiple analog inputs, digital inputs and outputs, and also supports speaker power amplifier and audio adjustment functions.

File format: PDF Size:1541 KB

The PCM3002 and PCM3003 are low-cost, single-chip stereo audio codecs (analog-to-digital and digital-to-analog converters) with single-ended analog voltage input and output.

File format: PDF Size:519 KB

This user's guide introduces the features and characteristics of the TLV320AIC12KEVM and TLV320AIC14KEVM data acquisition products.

File format: PDF Size:190 KB

This data sheet describes the features and characteristics of the SN54LVTH273/SN74LVTH273 low-voltage 8-bit D-type flip-flops.

File format: PDF Size:491 KB

The CD4013B series is a dual D-type flip-flop from Texas Instruments (TI), which includes 14-lead hermetic dual-in-line ceramic packages, 14-lead dual-in-line plastic packages, 14-lead small-outline packages, 14-lead thin shrink small-outline packages and other packaging forms.

File format: PDF Size:693 KB

This document describes the features and characteristics of the SCLS412I product, including operating voltage range, timing characteristics, and output levels. The product supports mixed-mode voltage operation, partial power-down mode, and ESD protection.

File format: PDF Size:970 KB

The SN54F02 and SN74F02 are four independent 2-input NOR gates. They perform the Boolean functions Y = A + B or Y = A • B in positive logic. The SN54F02 is characterized for operation over the full military temperature range of –55°C to 125°C. The SN74F02 is characterized for operation from 0°C to 70°C.

File format: PDF Size:642 KB

SN65LVDS33, SN65LVDT33, SN65LVDS34, and SN65LVDT34 are high-speed differential receivers. They operate with a single 3.3V supply and have a signaling rate of up to 400Mbps and a data transfer rate of 200Mxfr/s. They have a -4V to 5V common-mode input voltage range, with differential input thresholds <±50mV and 50mV of hysteresis over the entire common-mode input voltage range. The LVDT products have integrated 110Ω line termination resistors. They comply with TIA/EIA-644 (LVDS) and have active failsafe to ensure a high-level output with no input. The bus-pin ESD protection exceeds 15kV HBM. The inputs remain high-impedance on power down and are 5V TTL tolerant. They are pin-compatible with the AM26LS32, SN65LVDS32B, µA9637, and SN65LVDS9637B, and are available in TSSOP packaging.

File format: PDF Size:272 KB

SN54HC32 and SN74HC32 are quadruple independent 2-input positive-or gates. They have a wide operating voltage range of 2V to 6V, can drive up to 10 LSTTL loads, have low power consumption (maximum 20µA ICC), short propagation delay (typical value of 8ns), high output drive capability (±4mA at 5V), and low input current (maximum 1µA).

File format: PDF Size:693 KB

The bq24610 is a highly integrated, low quiescent current synchronous switch mode battery charge controller. It supports 1-6 cell battery strings, input voltage range of 5V-28V, and maximum 10A charge current and 10A adapter current.

File format: PDF Size:1784 KB

CD54AC32, CD74AC32 are quadruple 2-input positive-OR gates produced by Texas Instruments. The working voltage is 1.5-5.5V, and the anti-interference ability is strong. The output drive current is ±24mA.

File format: PDF Size:512 KB