ST Manuals (Others)

The EMIF02-SPK01M6 is a 2-line IPAD™, EMI filter and ESD protection for speaker. It features high efficiency in EMI filtering, low PCB space consumption, and high efficiency in ESD suppression.

File format: PDF Size:162 KB

BAR46BAR46A is a Schottky diode produced by Texas Instruments, with a maximum reverse voltage of 100V, a maximum forward current of 150mA, and a maximum operating temperature of 150℃

File format: PDF Size:496 KB

The TDA1151 is an integrated circuit that is used to control the speed of motors in record players, tape and cassette recorders, movie cameras, and toys. It features high output current (up to 800mA), low quiescent current (1.7mA), low reference voltage (1.2V), and excellent temperature stability.

File format: PDF Size:125 KB

The STPC Client is an embedded microprocessor with powerful x86 processor, 64-bit 66MHz bus interface, 64-bit DRAM controller, SVGA graphics controller, UMA architecture, video scaler, video output port, video input port, and other features. It also includes PCI master/slave/arbiters, ISA master/slave, IDE controller, DMA controller, interrupt controller, timer/counters, and power management. The product integrates a standard 5th generation x86 core, a DRAM controller, a graphics subsystem, a video pipeline, and support logic including PCI, ISA, and IDE controllers to provide a single consumer-oriented PC compatible subsystem on a single device.

File format: PDF Size:769 KB

ST72561 is an 8-bit microcontroller produced by ST company with Flash or ROM, 10-bit ADC, 5 timers, SPI, LINSCI®, ACTIVE CAN and other features.

File format: PDF Size:8785 KB

The TSV991/2/4 family of single, dual & quad operational amplifiers offers low voltage operation and rail-to-rail input and output. This family features an excellent speed/power consumption ratio, offering a 20MHz gain-bandwidth, stable for gain above 3 (100pF capacitive load), while consuming only 1.1mA max at 5V supply voltage. It also features an ultra-low input bias current. These characteristics make the TSV991/2/4 family ideal for sensor interfaces, battery-supplied and portable applications, as well as active filtering.

File format: PDF Size:484 KB

The M87C257 is a high-speed 262,144-bit UV erasable and electrically programmable EPROM. It incorporates latches for all address inputs to minimize chip count, reduce cost, and simplify the design of multiplexed bus systems. It offers fast access time, low power consumption, programming voltage of 12.75V, electronic signature for automated programming, and programming times of around 3 seconds (using the PRESTO II algorithm).

File format: PDF Size:110 KB

M27V512 512 Kbit (64Kb x8) Low Voltage UV EPROM and OTP EPROM is a low voltage 512 Kbit EPROM offered in the two ranges UV (ultra viloet erase) and OTP (one time programmable) by TOSHIBA. It is ideally suited for microprocessor systems and is orga- nized as 65,536 by 8 bits. The M27V512 operates in the read mode with a supply voltage as low as 3V.

File format: PDF Size:111 KB

This document describes the features and characteristics of M29F040 4 Mbit (512Kb x8, Uniform Block) Single Supply Flash Memory, including supply voltage, access time, programming time, erase time, erase and programming controller, low power consumption, data retention time, electronic signature, etc.

File format: PDF Size:240 KB

M29F002T, M29F002B, M29F002NT is a 2 Mbit (256Kb x8, Boot Block) single supply flash memory with a 5V ± 10% supply voltage. Read and write time is 70ns and 10µs respectively. It supports erase, protection, temporary unprotection, freeze and resume. It supports 100,000 erase cycles and data can be retained for 20 years

File format: PDF Size:204 KB

The L7800 series is a three-terminal positive regulator with several fixed output voltages, making it useful in a wide range of applications. These regulators can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type employs internal current limiting, thermal shut-down and safe area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents.

File format: PDF Size:1477 KB

This is a high performance, low start-up current, low voltage lockout, programmable current mode PWM controller with automatic feed forward compensation, latching PWM, over current limiting, high current output, double pulse suppression and other functions.

File format: PDF Size:126 KB

This document describes a dual Schottky rectifier suitable for switch mode power supply and high frequency DC to DC converters. The product has very small conduction losses, negligible switching losses, extremely fast switching, low forward voltage drop for higher efficiency, low thermal resistance, and avalanche capability.

File format: PDF Size:99 KB

The M45PE20 is a 2Mbit, low voltage, page-erasable serial flash memory with byte-alterability and a 33MHz SPI bus interface.

File format: PDF Size:526 KB

The document describes the M74HC174 high-speed CMOS hex D-type flip-flop with clear. It features high speed, low power dissipation, high noise immunity, symmetrical output impedance, balanced propagation delays, and a wide operating voltage range.

File format: PDF Size:252 KB

The M25P80 is an 8Mbit low voltage serial flash memory with a 40MHz SPI bus interface. Its features include: 8Mbit of flash storage, page programming (up to 256 bytes) in 1.4ms (typical), sector erase (512 Kbit) in 1s (typical), bulk erase (8 Mbit) in 10s (typical), 2.7 to 3.6V single supply voltage, SPI bus compatible serial interface, 40MHz clock rate (maximum), deep power-down mode 1µA (typical), and electronic signature (13h).

File format: PDF Size:564 KB

STP6NB90 is an advanced family of power MOSFETs with outstanding performances designed by STMicroelectronics using the latest high voltage MESH OVERLAY process. The new patent pending strip layout coupled with the Companys proprietary edge termination structure, gives the lowest RDS(on) per area, exceptional avalanche and dv/dt capabilities and unrivalled gate charge and switching characteristics. This product is suitable for high current, high speed switching, switch mode power supplies (SMPS), DC-AC converters for welding equipment and uninterruptible power supplies and motor drive applications.

File format: PDF Size:110 KB

The LF00AB/C series of voltage regulators have a very low dropout voltage and very low quiescent current, making them ideal for low noise and low power applications, especially in battery-powered systems. The device features a logic-controlled electronic shutdown function that can be used to place a portion of the circuit in standby mode when not needed, reducing overall power consumption. The device is available in PENTAWATT, TO-220, ISOWATT220, DPAK, and PPAK packages, with a wide range of output voltages to meet the needs of different applications.

File format: PDF Size:263 KB

File format: PDF Size:1982 KB

This document provides preliminary information on a new product that is currently in development or undergoing evaluation. The product is a programmable peripheral device that allows for data changes. It features a single supply voltage, primary flash memory, secondary flash memory, SRAM, PLD, I/O ports, and more.

File format: PDF Size:477 KB