Industrial Manuals

Features of the high frequency flanged terminator include low return loss, high power dissipation range from 10W to 250W, long life, temperature stable thin film technology, aluminum nitride (AIN) high thermal conductivity, single or double flanges, single or double end leads.

File format: PDF Size:159 KB

The CIL Series Ordinary Type Chip Inductor has magnetic shielding function, which can eliminate crosstalk and thus allow higher mounting densities. It has excellent solderability and high heat resistance for both flow or reflow soldering. Monolithic structure for high reliability.

File format: PDF Size:68 KB

The document provides specifications and features of CM45, CM32, CM25, CM20, CM16, CM10 SMT chip inductors 220K, including high resistance to heat and humidity, resistance to mechanical shock and pressure, accurate dimensions for automatic surface mounting, and a wide range of inductance. The document also includes recommended land pattern dimensions and marking information for different models of inductors.

File format: PDF Size:420 KB

The AT93C46/56/57/66 is a serial electrically erasable programmable read only memory (EEPROM) with 1024/2048/4096 bits of storage capacity and an internal organization of 64/128/256 words of 16 bits each when the ORG pin is connected to VCC and 128/256/512 words of 8 bits each when it is tied to ground. The device is optimized for use in many industrial and commercial applications where low power and low voltage operations are essential. AT93C46/56/57/66 is available in space saving 8-pin PDIP and 8-pin JEDEC and EIAJ SOIC packages.

File format: PDF Size:113 KB

The bq20851-v1p2 is a SBS-compliant fuel gauge IC from TI for battery pack installation that maintains an accurate record of available charge in Li-ion or Li-polymer batteries. The bq20851-v1p2 monitors capacity and other critical parameters of the battery pack and reports the information to the system host controller over a serial communication bus. It is designed to work with the bq29311 analog front-end (AFE) protection IC to maximize function.

File format: PDF Size:468 KB

This document introduces the features and characteristics of the TDA7580 chip, including FM/AM IF sampling DSP, software based channel equalization, FM adjacent channel suppression, reception enhancement in multipath conditions, stereo decoder and weak signal processing, 2 channels serial audio interface (SAI), I2C and buffer-SPI control interfaces, RDS filter, demodulator and decoder, inter processor transport interface, antenna and tuner diversity and front-end AGC feedback.

File format: PDF Size:451 KB

DDC’s BUS-61559 series of Advanced Integrated Mux Hybrids with enhanced RT Features (AIM-HY’er) comprise a complete interface between a micro-processor and a MIL-STD-1553B Notice 2 bus, implementing Bus Controller (BC), Remote Terminal (RT), and Monitor Terminal (MT) modes.

File format: PDF Size:50 KB

This is a datasheet about LM1893 and LM2893

File format: PDF Size:580 KB

B32231 MKT capacitors are flat wound film capacitors with a flat winding and insulating sleeve. It features high reliability, high stability and high heat resistance, and is suitable for power filtering and decoupling applications.

File format: PDF Size:118 KB

UC1852 provides a low-cost solution to active power-factor correction (PFC) for systems that would otherwise draw high peak current pulses from AC power lines. This circuit implements zero-current switched boost conversion, producing sinusoidal input currents with a minimum of external components, while keeping peak current substantially below that of fully-discontinuous converters. The UC1852 provides controlled switch on-time to regulate the output bulk DC voltage, an off-time defined by the boost inductor, and a zero-current sensing circuit to reactivate the switch cycle. Even though switching frequency varies with both load and instantaneous line voltage, it can be maintained within a reasonable range to minimize noise generation. The ability to obtain a power factor in excess of 0.99 makes the UC1852 an optimum choice for low-cost applications in the 50 to 5.

File format: PDF Size:163 KB

The document contains the features and characteristics of the products.

File format: PDF Size:136 KB

This document describes the technical data and features of the Quick Assembly Two and Three Channel Optical Encoders. These encoders have two or three channels and support quadrature output with optional index pulse. Features include quick and easy assembly, no signal adjustment required, availability of external mounting ears, low cost, resolutions up to 1024 counts per revolution, small size, operating temperature range of -40°C to 100°C, TTL compatibility, and single 5V supply.

File format: PDF Size:291 KB

This document introduces the features and characteristics of the MtronPTI M3H & MH Series 8 pin DIP, 3.3 or 5.0 Volt, HCMOS/TTL Clock Oscillator Pin Connections product.

File format: PDF Size:230 KB

The LS840/LS841/LS842 is a low noise, low drift, low capacitance monolithic dual N-channel JFET from Linear Integrated Systems

File format: PDF Size:33 KB

HM66 series miniature inductors

File format: PDF Size:944 KB

The document describes a series of Fast Ethernet transformers with different specifications and parameters. These transformers have different turns ratios, insertion loss, return loss, and common mode rejection ratios.

File format: PDF Size:398 KB

The document introduces CAMD PRC201/211/221 EMI/RFI Tapped Filter. The filter is designed to suppress EMI/RFI noise on high speed data lines and at I/O ports of PCMCIA fax/modem and LAN type cards. The filter is a thin film resistor-capacitor network housed in a ultra low profile, surface mount package suitable for bottom side mounting to the card which minimizes space and routing problems and improves reliability.

File format: PDF Size:45 KB

L7800 series positive voltage regulators are available in TO-220 ISOWATT220 TO-3 and D2PAK packages and several fixed output voltages, making it useful in a wide range of applications.Theseregulators can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type employs internal current limiting, thermal shut-down and safe area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustablevoltages and currents.

File format: PDF Size:241 KB

The Si9912 is a dual MOSFET high-speed driver with break-before-make. It is designed to operate in high frequency dc-dc switchmode power supplies. The high-side driver is bootstrapped to handle the high voltage slew rate associated with “floating” high-side gate drivers. Each driver is capable of switching a 3000-pF load with 60-ns propogation delay and 25-ns transition time. The Si9912 comes with an internal break-before-make feature to prevent shoot-through current in the external MOSFETs. A shutdown pin is used to enable the driver. When disabled, the quiescent current of the driver is less than 5 μA. The Si9912 is available in both standard and lead (Pb)-free, 8-pin SOIC packages for operation.

File format: PDF Size:89 KB

This document describes the absolute maximum ratings and electrical characteristics of the FJNS3208R NPN epitaxial silicon transistor. It is suitable for switching circuits, inverters, interface circuits, and driver circuits.

File format: PDF Size:37 KB