Industrial Manuals

This document introduces the specifications of ELC-10JT, including product features, models, power, frequency range, etc.

File format: PDF Size:117 KB

The XC6203E series are highly precise, low power consumption, positive voltage regulators manufactured using CMOS and laser trimming technologies. The series provides large currents with a significantly small dropout voltage. The XC6203E consists of a driver transistor, a precision reference voltage and an error amplifier. Output voltage is selectable in 0.1V steps between a voltage of 1.8V and 6.0V. Available packages include SOT-89 (500mW), SOT-223 (1200mW) and TO-92 (300mW).

File format: PDF Size:506 KB

The Spartan™ and Spartan-XL families are high-volume production FPGA solutions that meet all the key requirements for ASIC replacement, including high performance, on-chip RAM, core solutions, and prices. These products are suitable for applications where high volume approaches and is equivalent to mask programmed ASIC devices.

File format: PDF Size:704 KB

File format: PDF Size:0 KB

File format: PDF Size:48 KB

The US2075 is a typical application in a flexible motherboard designed for Intel P55, P54, AMD K5, K6, as well as Cyrix M1 and M2 applications. It combines a PWM switcher controller and a 7.5A low dropout regulator, providing a total solution for dual supply processor applications.

File format: PDF Size:39 KB

This document is about Xilinx Spartan™-3 FPGA data sheet, including 4 modules: Introduction and Ordering Information, Functional Description, DC and Switching Characteristics, Pinout Descriptions, which detail the features, functions, structure, pin definitions of Spartan™-3 FPGA

File format: PDF Size:1760 KB

The MRA4003T3 series is a surface mount standard recovery power rectifier with glass passivation. It is ideally suited for surface mount automotive applications. The compact J-Bend leads package is ideal for automated handling. The rectifier has a stable, high temperature, glass passivated junction. The case is molded epoxy that meets UL 94 V-0 standards and weighs approximately 70 mg. All external surfaces are corrosion resistant and the terminal leads are readily solderable. The lead and mounting surface temperature for soldering purposes is 260°C maximum for 10 seconds in a solder bath. The rectifier has a band in the plastic body to indicate the cathode lead. The ordering information includes various package options and quantities. Maximum ratings information is not provided in the document.

File format: PDF Size:55 KB

The HZM-N series is a silicon epitaxial planar zener diode for stabilizer. It features a wide spectrum of zener voltage from 1.9V through 38V for flexible applications. The MPAK package is suitable for high density surface mounting and high speed assembly.

File format: PDF Size:39 KB

dsc-4621/2 is a high-performance high-speed bidirectional bus transceiver produced by idt company. it has a 9-bit parity checker/generator, can provide buffered direction and three-state control, error flag with open-drain output, iol = 48ma (commercial) and 32ma (military)

File format: PDF Size:75 KB

File format: PDF Size:121 KB

File format: PDF Size:1554 KB

AMT8650 is a 10Gb/s optical receiver from ANADIGICS company. It has the characteristics of low cost, high performance, high bandwidth and high gain. The product adopts a 5-pin high-density package and is suitable for SONET OC-192/SDH STM-64 and 10Gb/s Ethernet applications.

File format: PDF Size:162 KB

Skyworks MIS Chip Capacitors are a high reliability product that is suitable for applications requiring DC blocking, RF bypassing or as a fixed capacitance tuning element in filters, oscillators and matching networks.

File format: PDF Size:52 KB

Am27C040 is a 4Mbit EPROM storage device from AMD that features fast access time, low power consumption, single-supply power, 100% Flashrite™ programming, etc.

File format: PDF Size:89 KB

GS8322V18/36/72 is a 37,748,736-bit high performance synchronous SRAM with a 2-bit burst address counter. Although of a type originally developed for Level 2 Cache applications supporting high performance CPUs, the device now finds application in synchronous SRAM applications, ranging from DSP main store to networking chip set support.

File format: PDF Size:1026 KB

File format: PDF Size:0 KB

The 8XC251SA/SB/SP/SQ is a member of the Intel family of 8-bit MCS 251 microcontrollers. It is binary-code compatible with MCS 51 microcontrollers and pin compatible with 40-pin PDIP and 44-pin PLCC MCS 51 microcontrollers. MCS 251 microcontrollers feature an enriched instruction set, linear addressing, and efficient C-language support. The 8XC251SA/SB/SP/SQ has 512 bytes or 1 Kbyte of on-chip RAM and is available with 8 Kbytes or 16 Kbytes of on-chip ROM/OTPROM/EPROM, or without ROM/OTPROM/EPROM. A variety of features can be selected by new user-programmable configurations.

File format: PDF Size:181 KB

The ICS8427-02 is a general purpose, six LVHSTL output high frequency synthesizer and a member of the HiPerClockS™ family of High Performance Clock Solutions from ICS. It supports a very wide output frequency range of 15.625MHz to 500MHz. The device powers up at a default output frequency of 200MHz with a 16.6667MHz crystal interface, and the frequency can then be changed using the serial programming interface to change the M feedback divider and N output divider. Frequency steps as small as 125kHz can be achieved using a 16.6667MHz crystal and the output divider set for ÷16. The low jitter and frequency range of the ICS8427-02 make it an ideal clock generator for most clock tree applications.

File format: PDF Size:246 KB

S8380/S8381 series are designed to have higher sensitivity in the infrared and soft X-ray regions when compared to standard NMOS linear image sensors. The peak sensitivity wavelength is in the near IR region (λp=750 nm).

File format: PDF Size:142 KB