3M Manuals (Others)

3M™ 2214 Paper Masking Tape is a general purpose paper tape for holding, bundling, sealing, and non-critical masking jobs where a pressure sensitive tape is needed.

File format: PDF Size:41 KB

Scotchlok™ 905 Self-Stripping Electrical Connectors are used to electrically connect two wires in a tap, inline, pigtail, or double run installation and insulate the connection.

File format: PDF Size:74 KB

3M™ Twisted Pair Flat Cable .050″ 28 AWG Stranded, Mass Terminatable, PVC 3782 Series is a flat cable product produced by 3M company.

File format: PDF Size:322 KB

5413 Polyimide Film Tape is a tape consisting of a Kapton® polyimide film and silicone adhesive designed for high temperature applications.

File format: PDF Size:270 KB

This document provides information about 3M's interconnect solutions, including the physical, electrical, and environmental characteristics of the 3M™ Eurosocket product. The product features high density, compatibility with DIN 41612 Type B headers, and a high reliability contact design.

File format: PDF Size:519 KB

The 8810 respirator meets the European standard EN149:2001 and is classified as a FFP2 respirator. It has a protection factor of 10 and can effectively block dust and mist. However, it cannot block gases, vapors, solvents, and environments with oxygen content less than 19.5%.

File format: PDF Size:181 KB

This document is a Material Safety Data Sheet for 3M(TM) Polyimide Film Tape 5419 produced by 3M Company. According to the OSHA Hazard Communication Standard, this product should not present a health and safety hazard when used as recommended or under ordinary conditions. However, use or processing of the product not in accordance with the product's recommendations or not under ordinary conditions may affect the performance of the product and may present potential health and safety hazards.

File format: PDF Size:33 KB

The 3M™ Mini D Ribbon (MDR) Connectors .050″ Boardmount Through-Hole Vertical Receptacle - Shielded 102 Series is made of glass filled polyester (PBT) or glass filled polyester (PCT) with UL 94V-0 flammability rating. It can be installed through PCB. The interface is fixed by metal housing and screw lock for reliable PCB retention. It also has wiping contact head for reliable repetitive plugging. The interface provides 14, 20, 26, 36, 40, 50, 68, 80 and 100 contacts and has IEEE 1284C interface.

File format: PDF Size:368 KB

3M™ 9713 is an isotropic conductive pressure sensitive adhesive film that conducts electricity through the thickness (Z-axis) and in the plane of the adhesive (X, Y-axis). It is ideal for EMI/RFI shielding and attaching EMI/RFI seals to metal surfaces. Consists of a high-performance 3M adhesive with conductive fibers. 3M™ 9713 has good adhesive strength and good electrical performance. In addition, the conductive fibers in the 3M™ 9713 adhesive film provide improved handling properties. The electrically conductive adhesive film 3M™ 9713 is ideal for applying EMI shielding to electronic and electrical devices. 3M™ 9713 can be used with many metal foil shields such as aluminum/PVC or copper/PVC laminates for a custom shielding solution. It can also be used to attach conductive textile/foam core EMI seals to electrical housings. It can be applied in strips or die-cut parts in special shapes and sizes. Compared to screws or other mechanical connections, 3M™ 9713 requires less assembly time and allows a stable and seamless joint that ensures 100% shielding. 3M manufacturing plant is ISO 9002 certified.

File format: PDF Size:20 KB

3M Pak 100 PCB .100" x .100" Two Row 39XX Series is a product of 3M Company. It fits standard .100 inch x .100 inch header layout. It uses less board area than 4-row design. It can be equipped with strain relief

File format: PDF Size:189 KB

3M Round Conductor Flat Cable 1.0 mm 28 AWG Stranded, PVC 3625 Series TS-0452-10 is a round conductor flat cable produced by 3M company. The wire diameter is 1.0 mm, AWG is 28, the conductors are seven strands of 36, and the rated voltage is 300V. The rated temperature is -20°C to +105°C.

File format: PDF Size:715 KB

The 3M 820 Series Tripolarized Wiremount Socket .050″ × .100″ is a socket that is suitable for .025″ pitch cables and has a current rating of 0.5 A, a voltage rating of 500 Vrms, a temperature rating of -55°C to +105°C, > 1 × 109 ohm insulation resistance and 30 AWG solid, 30 AWG pleated foil and 30 AWG stranded gold wire accommodation.

File format: PDF Size:338 KB

3M™Model 724 Work Station Monitor Instructions, introduces the design, test, installation and fault conditions of the monitor.

File format: PDF Size:140 KB

This document describes the features and characteristics of 3M's D Ribbon Wiremount Plug, including acceptance of wire gauges, low profile, flexible mounting applications, contact design efficiency, physical insulation material, current and temperature ratings, etc.

File format: PDF Size:60 KB

851 Greenback Printed Circuit Board Tape is a green polyester film tape with a special conformable adhesive which resists plating bath chemicals.

File format: PDF Size:38 KB

3M™ Pak 20 Wiremount Socket 2 mm × 2 mm for 1 mm Pitch Cable 1522 Series is a connector produced by 3M company. Its main features are industry standard compatibility, low connection height, pre-assembled cover, optional strain relief, optional center bump polarity feature and compliance with RoHS* standard.

File format: PDF Size:579 KB

The 3M™ 718 Static Sensor is a portable, handheld instrument designed for measuring voltages associated with electrostatic charge. Its intended use is for measuring the amount of voltage, in a range from 0-20 kilovolts, associated with an electrostatic charge buildup on a surface. Any deviation from this intended use could impair the instrument’s effectiveness and possibly lead to an unsafe operating condition. The 3M™ 718A Air Ionizer Test Kit is a set of accessories for use in conjunction with the 3M 718 Static Sensor. Their intended use is for verifying the operation of air ionizers by measuring the neutralization time for a static charge placed on a stationary metal plate. Any deviation from this intended use could impair the instrument’s effectiveness and possibly lead to an unsafe operating condition.

File format: PDF Size:1486 KB

3M Pak 100 4-Wall Header .100″ × .100″ Latch/Ejector, Straight and Right Angle 3000 Series is a product of 3M Company. Its features include: military grade (with 3M's 3518 polarizing key), standard ejector latches, mounting holes for securing header to board, RoHS* compliant, optional polarizing posts, high temperature insulator suitable for “no lead” soldering operations and reflow soldering using “paste in hole” techniques.

File format: PDF Size:677 KB

3M 1245 Tape consists of an embossed 1-ounce deadsoft copper foil backing and an aggressive pressure-sensitive acrylic adhesive. The tape is typically used for applications requiring excellent electrical conductivity from the application substrate through the adhesive to the foil backing, such as grounding and EMI shielding in equipment, components, shielded rooms, etc. The copper foil backing is solderable and resists oxidation and discoloration.

File format: PDF Size:21 KB

3M 1170 Tape is an aluminum foil tape with excellent electrical conductivity, widely used for grounding and EMI shielding in electronic equipment.

File format: PDF Size:64 KB