3M Manuals (Others)

File format: PDF Size:186 KB

This document describes the features and characteristics of the 3M™ reusable respirators, including maintenance-free design, low breathing resistance, and comfortable facepiece material.

File format: PDF Size:44 KB

The document introduces the features and characteristics of Ground Man Ground Monitors for Tools, including ground impedance monitoring, adjustable impedance alarm level, enable/disable for each ground, operator wrist strap monitoring, operator body voltage monitoring, etc. The product is applicable in electronics assembly, semiconductor device manufacturing, medical environment, military aerospace, and other fields to protect sensitive boards from overvoltage and electrostatic discharge.

File format: PDF Size:972 KB

3M Polarized Boardmount Socket .100" × .100" Centerbump Polarization with Right Angle Solder Tails 5100 Series is a product of 3M. It has the following features: Glass filled polyester (PBT) insulation material, UL 94V-0 flame retardant rating, gray appearance, copper alloy plating underlayer and U-slot, 2 micron (79 microinch) nickel wiping area, 0.3 micron (12 microinch) gold solder tails, 3M logo, part identification number and orientation triangle mark, 1 ampere current rating, greater than 1 times 109 ohms of insulation resistance at 500 volts direct current voltage, 1000 volts rms sea level withstand voltage, -55 degrees Celsius to 105 degrees Celsius temperature range.

File format: PDF Size:315 KB

3M™ 69 Glass Cloth Electrical Tape is a white glass cloth tape with a high-temperature thermosetting silicone adhesive. The thermosetting adhesive provides an increased bond once applied in areas of high ambient temperatures. 69 Tape is UL recognized for continuous use up to 200°C. It conforms to Military Specification No. MIL-I-19166C.

File format: PDF Size:9 KB

Scotch Tape 2211 is a utility purpose paper tape for fixing-, bundling-, holding- and sealing applications as well as for short term paint masking and other uses up to a temperature of 80 °C for one hour.

File format: PDF Size:17 KB

This document introduces 3M's Interconnect Solutions products, including the D Sub EMI Junction Shell. The product provides protection from EMI/ESD, is easy to assemble, and reduces time and labor costs.

File format: PDF Size:366 KB

3M electronic connector TS-0362-09's 10 to 36 pin ZIP strip sockets, with 1 Amp current rating, >1 x 10^9 W insulation resistance, 1000 Vrms voltage withstand and -55°C to +150°C environmental operating temperature rating.

File format: PDF Size:191 KB

This document describes the features and characteristics of the 213 High Temperature Masking Tape, including its material, adhesive type, physical properties, performance characteristics, and temperature range.

File format: PDF Size:42 KB

3M™ Color Coded Flat Cable .050″ 28 AWG Stranded, PVC 3302 Series features: 28 AWG wire on .050 inch centers permits mass termination to a broad line of IDC connectors; stranded wire provides flexibility and extended product life; zippable for branching or discrete termination; color coded for wire identification; RoHS* Compliant

File format: PDF Size:514 KB

This document describes the features of 3M™ Mini D Ribbon (MDR) Connectors Metal Junction Shell for Round Cable 103 series, including its physical characteristics, RoHS compliance, material, marking, applicable positions, etc.

File format: PDF Size:530 KB

3M™ Bonding Film 583 is a high strength, flexible, nitrile phenolic based thermoplastic bonding film. It can be heat or solvent activated for bonding. 3M™ Bonding Film 583 can also be lightly crosslinked using a post heat exposure. This crosslinking will provide additional heat and solvent resistance as well as somewhat higher shear strengths.

File format: PDF Size:93 KB

3M® Mini-Clamp Plug 2 mm IDC, Wiremount 371 Series TS-2092-02 is a connector produced by 3M Company.

File format: PDF Size:365 KB

3M™ Mini D Ribbon (MDR) Connectors Metal Junction Shell for Round Cable 103 Series is a metal junction shell produced by 3M Company. It is made of aluminum with a thickness of 0.050 inches and is nickel-plated. It has 14, 20, 26, 36, 40, 50, 68 and 100 positions and complies with the RoHS standard.

File format: PDF Size:367 KB

File format: PDF Size:153 KB

This 3M D Sub 8250 series 50 pin plug has IDC compatibility, EMI/ESD protection, lower insertion/withdrawal force than other 50 position products, and is available in either open or closed end cover, with mounting options of #4-40 UNC or metric M2.5 threated inserts.

File format: PDF Size:40 KB

High performance Alumina Zirconia fibre disc

File format: PDF Size:43 KB

3M MDR Connectors 0.050″ Surface Mount Right Angle Receptacle - Shielded 102 Series features reliable repetitive plugging, ultra-low signal skew for high data rate transmission, interface latch design for connection stability.

File format: PDF Size:368 KB

3M™ Low Static Polyimide Film Tape 5419 is a translucent, polyimide film-backed silicone adhesive tape with unique and extremely low electrostatic discharge properties.

File format: PDF Size:58 KB

3M™ Hyper Soft Thermally Conductive Interface Pads 5516 / 5516S are silicone elastomer pads with good thermal conductivity and electrical insulation properties, designed to facilitate heat transfer between heat generating components and heat sinks, heat spreaders or other cooling devices.

File format: PDF Size:64 KB