MICROCHIP Manuals (Industrial)

MICROCHIP TC426/TC427/TC428 1.5A Dual High-Speed Power MOSFET Drivers handbook

This datasheet provides detailed information on the TC426/TC427/TC428 high current dual CMOS switch drivers. These drivers are ideal for high current applications such as switch mode power supplies, pulse transformer drive, clock line driver and coax cable driver.

File format: PDF Size:462 KB

MICROCHIP PIC16LC74B-16/PTL16 handbook

This datasheet provides a detailed overview of the PIC16LC74B-16/PTL16 microcontroller, including its core features, operating speed, memory size, interrupt capability, power management, timers and capture, compare and PWM functions.

File format: PDF Size:310 KB

MICROCHIP PIC16CR54C Data Sheet

This is a detailed datasheet for the PIC16CR54C chip

File format: PDF Size:561 KB

MICROCHIP MCP111/112 Data sheet

The MCP111/112 is a voltage detecting device designed to keep a microcontroller in reset until the system voltage has stabilized at the appropriate level for reliable system operation.

File format: PDF Size:253 KB

MICROCHIP MCP73841/2/3/4 Data sheet

MCP73841/2/3/4 is a linear charge management controller with high-accuracy preset voltage regulation, programmable charge current, safety charge timers, etc. It is suitable for applications such as lithium-ion/lithium-polymer battery chargers, personal data assistants, cellular telephones, hand-held instruments, cradle chargers, digital cameras, MP3 players.

File format: PDF Size:392 KB

MICROCHIP TC520A Serial Interface Adapter for TC500 A/D Converter Family handbook

The TC520A serial interface adapter provides logic control for Microchip's TC500/TC500A/TC510/TC514 family of dual slope, integrating A/D converters. It directly manages TC500 converter phase control signals A, B and CMPTR, thereby reducing host processor task loading and software complexity. Communication with the TC520A is accomplished over a 3 wire serial port. Key converter operating parameters are programmable for complete user flexibility. Data conversion is initiated when the CE input is brought low. The converted data (plus overrange and polarity bits) are held in an 18-bit shift register until read by the processor or until the next conversion is completed. Data may be clocked out of the TC520A at any time, and at any rate, the user prefers. A Data Valid (DV) output is driven active at the start of each conversion cycle, indicating the 18-bit shift register update has just been completed. This signal may be polled by the processor or can be used as...

File format: PDF Size:454 KB

MICROCHIP TC4420 TC4429 handbook

TC4420 TC4429 is a high-speed 6A MOSFET driver with high peak output current, wide operating range, high output impedance, short delay time, low input current and low output voltage swing. It can be used in switch-mode power supplies, motor controls, pulse transformer drivers and class D switching amplifiers.

File format: PDF Size:73 KB

MICROCHIP PIC24HJ12GP201/202 Data Sheet

File format: PDF Size:0 KB

MICROCHIP 28C64A handbook

This document describes the features and characteristics of the CMOS 64K non-volatile electrically Erasable PROM (28C64A) produced by Microchip Technology Inc., including fast read access time, low power consumption, fast byte write time, data retention of over 200 years, high endurance, etc.

File format: PDF Size:60 KB

MICROCHIP 25AA040/25LC040/25C040 Data sheet

25AA040/25LC040/25C040 is a 4K bit serial Electrically Eras- able PROM produced by Microchip Technology Inc.. It has low power CMOS technology, 512x8 bit organization, 16 byte page, self-timed erase and write cycles, etc.

File format: PDF Size:157 KB

MICROCHIP TC4403 1.5A High-Speed Floating Load Driver Data sheet

The TC4403 is a modified version of the TC4425 driver, intended to drive floating or isolated loads requiring high-current pulses. It features low quiescent current, high peak current capability, and fast output rise time.

File format: PDF Size:506 KB

MICROCHIP TC1272/TC1273/TC1274 Data sheet

The TC1272/TC1273/TC1274 are cost-effective system supervisor circuits designed to monitor VCC in digital systems and provide a reset signal to the host processor when necessary. No external components are required. The reset output is driven active within 20 µsec of VCC falling through the reset voltage threshold. RESET is maintained active for a minimum of 100 msec after VCC rises above the reset threshold. The TC1274 has an active-high RESET output, while the TC1272 and TC1273 have an active-low RESET output. The TC1272 and TC1274 each have a complimentary out- put, while the TC1273 has an open-drain output. The output of the TC1272 and TC1273 is valid down to VCC = 1.2V. The TC1274 is valid down to VCC = 1.8V. All three devices are available in a 3-Pin SOT-23B package. The TC1272/TC1273/TC1274 devices are optimized to reject fast transient glitches on the VCC line.

File format: PDF Size:298 KB

MICROCHIP PIC18CXX8 handbook

Introduces the characteristics of Microchip's DS30475A chip, including high-performance RISC CPU, high current input/output, four external interrupt pins, two capture/compare/PWM modules, master synchronous serial port (MSSP), 10-bit analog-to-digital converter module (A/D) and so on.

File format: PDF Size:2958 KB

MICROCHIP 25AA256/25LC256 handbook

25AA256/25LC256 is a 256k-bit Serial Electrically Erasable Programmable Read-Only Memory (Serial Electrically Erasable Programmable Read-Only Memory) produced by Microchip Technology Inc.

File format: PDF Size:368 KB

MICROCHIP PIC18F2480/2580/4480/4580 Data Sheet

This document describes the features and characteristics of the PIC18F2480/2580/4480/4580 series microcontrollers produced by Microchip Technology Inc., including ECAN™ technology, 10-bit A/D conversion, and nanoWatt technology.

File format: PDF Size:8618 KB

MICROCHIP PIC16F870/871 28/40-Pin 8-Bit CMOS FLASH Microcontrollers handbook

This document introduces a microcontroller product from Microchip Technology Inc. The product features a high-performance RISC CPU, 35 single-word instructions, single-cycle instruction execution (except for program branches which require two cycles), 2K x 14 words of FLASH Program Memory, 128 x 8 bytes of Data Memory (RAM), 64 x 8 bytes of EEPROM Data Memory, and more.

File format: PDF Size:1428 KB

MICROCHIP PIC16C72 SERIES Data Sheet

This document introduces the features of Microchip Technology Inc.'s PIC16C72/PIC16CR72 microcontrollers, including CPU, clock frequency, memory, interrupts, power management, timer, capture, compare, PWM, etc.

File format: PDF Size:624 KB

MICROCHIP PIC16C717/770/771 Data Sheet

This document describes the features and characteristics of a microcontroller from Microchip Technology Inc., including high-performance RISC CPU, 35 single word instructions, single cycle instructions, interrupt capability, hardware stack, different addressing modes, reset function, timers, etc.

File format: PDF Size:1601 KB

MICROCHIP PIC16C71X Data Sheet

This document introduces the features and characteristics of the PIC16C71X series of 8-bit CMOS microcontrollers

File format: PDF Size:790 KB

MICROCHIP PIC12F609/HV609 PIC12F615/HV615 Data Sheet

This document describes the features and characteristics of Microchip's PIC12F609/HV609 and PIC12F615/HV615 series of 8-bit CMOS microcontrollers. These 8-bit, 8-pin devices are protected by Microchip's Low Pin Count Patent and feature flash memory. The document also mentions related US and foreign patents and applications.

File format: PDF Size:1330 KB

Brands



Products