MICROCHIP Manuals (Industrial)

MICROCHIP MCP6021/1R/2/3/4 Data Sheet1

The MCP6021/1R/2/3/4 from Microchip Technology Inc. are rail-to-rail input and output op amps with high performance. Key specifications include: wide bandwidth (10 MHz), low noise (8.7 nV/√Hz), low input offset voltage and low distortion (0.00053% THD+N). The MCP6023 also offers a Chip Select pin (CS) that gives power savings when the part is not in use. The MCP6021, MCP6021R, MCP6022, MCP6023 and MCP6024 are suitable for various applications including automotive, driving A/D converters, multi-pole active filters, barcode scanners, audio processing, communications, DAC buffer, test equipment, and medical instrumentation.

File format: PDF Size:469 KB

MICROCHIP TC9400/9401/9402 Data Sheet

This document is the user manual of TC9400/9401/9402, which are low-cost Voltage-to-Fre- quency (V/F) converters with low power dissipation and high accuracy. It can be used in Microprocessor Data Acquisition, 13-bit Analog-to-Digital Converters (ADC), Analog Data Transmission and Recording, Phase Locked Loops, Frequency Meters/Tachometer, Motor Control and FM Demodulation applications.

File format: PDF Size:546 KB

MICROCHIP MCP9843/98243 Manual

The MCP9843/98243 digital temperature sensors from Microchip Technology Inc. convert temperature from -40°C to +125°C into a digital word. These sensors meet JEDEC Specification JC42.4-TSE3000B3 and JC42.4-TSE2002B3 Memory Module Thermal Sensor Component. They provide an accuracy of ±0.2°C/±1°C (typical/maximum) from +75°C to +95°C. Additionally, the MCP98243 has an internal 256 Byte EEPROM which can be used for data storage.

File format: PDF Size:1117 KB

MICROCHIP MCP6L01/1R/1U/2/4 Data Sheet

MCP6L01/1R/1U/2/4 is a low power, high gain, low noise, linear operational amplifier, which adopts SC-70-5 and SOT-23-5 packages, with a supply voltage range of 1.8V to 6.0V, and can be applied to portable equipment, photodiode amplifier, analog filters, notebooks and PDAs, battery-powered systems.

File format: PDF Size:504 KB


This data sheet introduces the features and characteristics of the PIC12C5XX series of microcontrollers

File format: PDF Size:1605 KB

MICROCHIP MCP73113 handbook

The MCP73113 is a highly integrated Li-Ion battery charge management controller for use in space-limited and cost-sensitive applications. It features complete linear charge management including input overvoltage protection, pass transistor, current sense, and reverse discharge protection. Additionally, it offers constant current/constant voltage operation with thermal regulation, undervoltage lockout, high accuracy preset voltage regulation, resistor programmable fast charge current, preconditioning of deeply depleted cells, automatic end-of-charge control, automatic recharge, charge status output, and more.

File format: PDF Size:548 KB

MICROCHIP 24AA128/24LC128/24FC128 User Manual

24AA128/24LC128/24FC128 is a 16K x 8 (128K bit) Serial Electrically Erasable PROM from Microchip Technology Inc., capable of operation across a broad voltage range (1.8V to 5.5V). It has been developed for advanced, low power applications such as personal communications or data acquisition. The device also has a page-write capability of up to 64 bytes of data. This device is capable of both random and sequential reads up to the 128K boundary. Functional address lines allow up to eight devices on the same bus, for up to 1M bit address space. The device is available in the standard 8-pin plastic DIP, 8-pin SOIC (150 and 208 mil), and 14-pin TSSOP packages.

File format: PDF Size:237 KB

MICROCHIP -25LC512 512 Kbit SPI Bus Serial EEPROM handbook

This document describes the features and characteristics of the Microchip Technology Inc. 25LC512 serial EEPROM memory, including maximum clock speed, byte and page-level write operations, low-power CMOS technology, electronic signature, self-timed erase and write cycles, sector write protection, built-in write protection, high reliability, etc.

File format: PDF Size:495 KB

MICROCHIP MCP6021/2/3/4 handbook

MCP6021/2/3/4 are operational amplifiers (op amps) introduced by Microchip Technology Inc. They have features such as rail-to-rail input/output, wide bandwidth, low noise, and low offset voltage.

File format: PDF Size:619 KB

MICROCHIP PIC12C67X handbook

This data sheet introduces the characteristics of PIC12C671, PIC12C672, PIC12CE673 and PIC12CE674

File format: PDF Size:1944 KB

MICROCHIP - PIC18F2585/2680/4585/4680 Data Sheet

This datasheet describes the features of 28/40/44-pin enhanced flash microcontrollers with ECAN™ Technology, 10-Bit A/D and nanoWatt Technology

File format: PDF Size:9219 KB

MICROCHIP MCP6141/2/3/4 600 nA Non-Unity Gain Rail-to-Rail Input/Output Op Amps Manual

The MCP6141/2/3/4 is a low quiescent current, stable operational amplifier that can operate from a single supply voltage as low as 1.4V. This device features a gain bandwidth product of 100kHz and is stable for gains of 10V/V or higher.

File format: PDF Size:743 KB

MICROCHIP PIC18F6X2X/8X2X Data Sheet Manual

Introduces the DS39612A PIC18F6X2X/8X2X 64/80-Pin High Performance, 64-Kbyte Enhanced FLASH Microcontrollers with A/D

File format: PDF Size:7059 KB


This data sheet provides detailed information about the PIC18FXX8 series microcontrollers, including product features, application examples, and technical details.

File format: PDF Size:3124 KB

MICROCHIP 24AA16/24LC16B handbook

The Microchip 24AA16/24LC16B (24XX16*) is a 16Kbit Electrically Erasable PROM. The device is organized as eight blocks of 256 x 8-bit memory with a 2-wire serial interface.

File format: PDF Size:367 KB

MICROCHIP MCP6566/6R/7/9 handbook

The MCP6566/6R/7/9 is a low-power, single-supply, open-drain output comparator from Microchip. It features low quiescent current, greater than rail-to-rail input range, open-drain output, wide voltage supply range, and can be used in single, dual, and quad configurations.

File format: PDF Size:1026 KB

MICROCHIP MCP131X/2X handbook

MCP131X/2X is a voltage supervisor device designed to keep a microcontroller in Reset until the system voltage has reached and stabilized at the proper level for reliable system operation.

File format: PDF Size:698 KB


This document introduces the features and characteristics of Microchip Technology Inc.'s high-performance RISC CPU products, including C-compiler optimized architecture instruction set, linear program memory addressing up to 32 Kbytes, linear data memory addressing up to 4 Kbytes, and up to 10 MIPS operation speed. In addition, the document also describes the peripheral features of the product, such as high current sink/source, multiple I/O ports with individual direction control, external interrupt pins, timer modules, capture/compare/PWM (CCP) modules, etc. It also includes advanced analog features such as a 10-bit Analog-to-Digital Converter module, addressable USART module, and Master Synchronous Serial Port (MSSP).

File format: PDF Size:6428 KB

MICROCHIP MCP9700/9700A MCP9701/9701A handbook

The MCP9700/9700A and MCP9701/9701A are a family of Linear Active Thermistor™ Intergrated Circuit (IC) from Microchip Technology Inc. It is an analog temperature sensor that converts temperature to analog voltage, with a wide temperature measurement range of -40°C to +125°C, high accuracy of ±2°C from 0°C to +70°C;±4°C from 0°C to +70°C, low power consumption of 6 µA, and can be used to drive large capacitive loads.

File format: PDF Size:510 KB

MICROCHIP MCP414X/416X/424X/426X handbook

The MCP414X/416X/424X/426X are Microchip 12-bit single-ended SPI digital potentiometers that can be configured as single or dual potentiometers and offer multiple options for resistance, resolution, and resistor network terminal disconnect.

File format: PDF Size:1992 KB