ST Manuals

The document describes the features and characteristics of the TN22 fluorescent tube lamp starter, including high clamping voltage structure, low gate triggering current, and high holding current. This product provides high energy striking characteristics with low triggering power, improving the reliability and lifespan of fluorescent tube lamps.

File format: PDF Size:321 KB

T630W is a 6A snubberless triac from ST. It is suitable for high inductance loads.

File format: PDF Size:80 KB

AVS12 is an automatic mains selector (110/220V AC) to be used in SMPS<500W.

File format: PDF Size:272 KB

The FLC01-200x is a dedicated thyristor structure for capacitance discharge ignition operation. It has a pulse current capability of 190A (tp = 10µs), a fast turn-on operation and is designed for high ambient temperature (up to 120°C).

File format: PDF Size:116 KB

The AVS08 kit is an automatic mains selector (110/220V AC) to be used in SMPS < 200 W. It consists of 2 devices: the Controller and the TRIAC. The Controller is optimized for low power consumption and high security triggering of the TRIAC. The TRIAC is specially designed for this application, with optimization between sensitivity and dynamic parameters to reduce supply resistor losses and provide excellent immunity against disturbances.

File format: PDF Size:132 KB

The TYN606 and TYN1006 family of Silicon Controlled Rectifiers are high performance glass passivated technology. This general purpose Family of Silicon Controlled Rectifiers is designed for power supply up to 400Hz on resistive or inductive load.

File format: PDF Size:66 KB

The BTW67 / BTW69 Series is suitable for applications where power handling and power dissipation are critical, such as solid state relays, welding equipment, high power motor control. They offer a superior performance in surge current handling capabilities due to their clip assembly technology. With their internal ceramic pad, they provide high voltage insulation (2500VRMS), complying with UL standards (file ref: E81734).

File format: PDF Size:83 KB

This datasheet provides all the information about BTA06 and BTB06 series 6A triacs including technical specifications, order codes, packages etc.

File format: PDF Size:75 KB

The AVS10 is an automatic mains selector (110/220V AC) to be used in SMPS < 300 W.

File format: PDF Size:331 KB

This datasheet lists the technical specifications of the H3LIS331DL MEMS motion sensor. The sensor is a low power, high-g, 3-axis accelerometer with digital output and is suitable for a variety of applications, such as shock detection, impact recognition and logging, and concussion detection.

File format: PDF Size:452 KB

This is a technical manual for LSM303D. It provides detailed information about its features and specifications.

File format: PDF Size:1010 KB

LSM330 is a MEMS sensor module released by ST company, which contains a 3D digital accelerometer and a 3D digital gyroscope, and has 2 embedded programmable state machines, which can realize autonomous applications and motion activated functions.

File format: PDF Size:1593 KB

This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. The product is a three-axis digital output gyroscope with features such as wide supply voltage, low power consumption, selectable full scales, and digital output interface.

File format: PDF Size:817 KB

The LSM333D is an inertial module capable of providing 9 DOF (degrees of freedom) inertial sensing by combining a 3D accelerometer, a 3D gyroscope and a 3D magnetometer in a system-in-package. The LSM333D has linear acceleration full-scales of ±2g/±4g/±8g/±16g, a magnetic field full-scale of ±2/±4/±8/±12 gauss and an angular rate of 250/±500/±2000 dps.

File format: PDF Size:1493 KB

A3G4250D MEMS motion sensor: 3-axis digital output gyroscope

File format: PDF Size:1073 KB

This document introduces the L3G4IS MEMS motion sensor, a three-axis digital output gyroscope that can be used for gaming and OIS applications. The sensor has three selectable full-scales (250/500/2000 dps) for gaming applications and ±65 dps full-scale for OIS applications. The sensor also has independent I2C and SPI digital interfaces, an embedded temperature sensor, user-selectable bandwidth low-pass and high-pass filters, a wide supply voltage range (2.4 V to 3.6 V), low voltage-compatible IOs (1.8 V), smart power saving power-down and sleep modes, and an embedded FIFO (first-in first-out buffer).

File format: PDF Size:475 KB

The LSM330D is a system-in-package featuring a 3D digital accelerometer and a 3D digital gyroscope. It has features such as low power mode, power-down mode, selectable full scale range, and programmable interrupt generator. It is suitable for applications such as GPS navigation systems, gaming and virtual reality input devices.

File format: PDF Size:1488 KB

L3G3200D is a low-power three-axis angular rate sensor produced by ST company. It has wide voltage input range (2.4V-3.6V), wide operating temperature range (-40℃-85℃), low power consumption, built-in power-down, sleep mode, three selectable full-scale, 16-bit rate value data output, 8-bit temperature data output, I2C/SPI digital output interface, two dedicated lines (1 interrupt, 1 data ready), user selectable bandwidth integrated low-pass filters, user enabled integrated high-pass filters, built-in self-test, built-in temperature sensor, built-in FIFO, high shock survivability, compliant with RoHS standard and “green” requirements. It is mainly used in gaming and virtual reality input devices, MMI (man-machine interface) motion control, GPS navigation systems, household appliances and robotics.

File format: PDF Size:1191 KB

This document introduces the features and characteristics of the LIS2DMMEMS digital output motion sensor, including wide supply voltage, independent I/O supply, ultra low power mode, ±2g/±4g/±8g/±16g dynamic selectable full scale, I2C/SPI digital output interface, 8-bit data output, 2 independent programmable interrupt generators, 6D/4D orientation detection, sleep to wake and return to sleep function, free fall detection, motion detection, embedded temperature sensor, embedded FIFO, ECOPACK®RoHS and green compliance

File format: PDF Size:962 KB

This datasheet provides the features and usage information of the LIS2DH 3-axis digital output “femto” accelerometer.

File format: PDF Size:972 KB