MICROCHIP Manuals

The HCS301 from Microchip Technology Inc. is a code hopping encoder designed for secure Remote Keyless Entry (RKE) systems. It features a programmable 28-bit serial number, programmable 64-bit encryption key, unique transmission for each transmission, 66-bit transmission code length, 32-bit hopping code, and 34-bit fixed code.

File format: PDF Size:444 KB

TC4426/TC4427/TC4428 is a high performance, high reliability 1.5A dual channel MOSFET driver, which meets the needs of various circuit design.

File format: PDF Size:66 KB

TC1269 is a fixed output, high accuracy (typically ±0.5%) CMOS upgrade for older (bipolar) low dropout regulators. It has very low ground current, low dropout voltage, 300mA output current, high output voltage accuracy, standard or custom output voltages, power saving shutdown mode, bypass input for ultra quiet operation, over current and over temperature protection.

File format: PDF Size:433 KB

File format: PDF Size:0 KB

The MCP6281/1R/2/3/4/5 family of operational amplifiers (op amps) provided by Microchip Technology Inc. have wide bandwidth and low power consumption.

File format: PDF Size:629 KB

The Microchip Technology Inc. 93LC46AX/BX are 1K- bit, low voltage serial Electrically Erasable PROMs. The device memory is configured as x8 (93LC46A) or x16 bits (93LC46B). Advanced CMOS technology makes these devices ideal for low power nonvolatile memory applications. The 93LC46AX/BX is available in standard 8-pin DIP, 8-pin surface mount SOIC, and TSSOP packages. The 93LC46AX/BX are offered only in a 150-mil SOIC package.

File format: PDF Size:249 KB

This data sheet introduces the core features, peripheral features, memory, and special microcontroller features of the PIC17C752 and PIC17C756 microcontrollers.

File format: PDF Size:1376 KB

The Microchip Technology Inc. DS11127G is a 16K non-volatile electrically Erasable PROM with fast read access time, low power dissipation and high endurance

File format: PDF Size:67 KB

The TC1412/TC1412N are 2A CMOS buffers/drivers, feature short delay times, low supply current and low output impedance.

File format: PDF Size:344 KB

MCP2515 is a stand-alone Controller Area Network (CAN) transceiver/decoder from Microchip Technology. It implements the CAN V2.0B protocol and supports data transmission rates of up to 1 Mb/s. The device features two prioritized receive buffers, six 29-bit filters, two 29-bit masks, three transmit buffers with prioritization and abort features, as well as a high-performance SPI interface.

File format: PDF Size:1292 KB

MCP434X/436X is a quad resistor network from Microchip, which provides potentiometer or rheostat configuration options, low temperature coefficient, non-volatile memory, high bandwidth, SPI serial interface, etc.

File format: PDF Size:2061 KB

The Microchip Technology Inc. 25AA256/25LC256 (25XX256*) are 256k-bit Serial Electrically Erasable PROMs.

File format: PDF Size:443 KB

This document describes the DS51527B Voltage Supervisor SOT-23-5/6 Evaluation Board User's Guide

File format: PDF Size:1290 KB

This document introduces the features of Microchip Technology Inc. 25AA080/25LC080/ 25C080 (25XX080*), including product features, package types, operating voltage, maximum clock frequency, and working temperature range

File format: PDF Size:306 KB

This user guide introduces the features and use of the DS51510A voltage supervisor SOT23 evaluation board.

File format: PDF Size:454 KB

This datasheet introduces the features and characteristics of Microchip Technology Inc. MCP6S21/2/6/8 analog programmable gain amplifiers (PGAs).

File format: PDF Size:881 KB

The MCP41XX and MCP42XX devices offer a wide range of product offerings using an SPI interface. This family of devices support 7-bit and 8-bit resistor networks, and Potentiometer and Rheostat pinouts.

File format: PDF Size:3221 KB

The MCP1603 is a high efficient, fully integrated 500 mA synchronous buck regulator whose 2.7V to 5.5V input voltage range makes it ideally suited for applications powered from 1-cell Li-Ion or 2-cell/3-cell NiMH/NiCd batteries. At heavy loads, the MCP1603 operates in the 2.0 MHz fixed frequency PWM mode which provides a low noise, low output ripple, small-size solution. When the load is reduced to light levels, the MCP1603 automatically changes operation to a PFM mode to minimize quiescent current draw from the battery. No intervention is necessary for a smooth transition from one mode to another. These two modes of operation allow the MCP1603 to achieve the highest efficiency over the entire operating current range. The MCP1603 is available in space saving 5-Lead TSOT and 8-Lead 2X3 DFN packages.

File format: PDF Size:775 KB

The TCN75A is a temperature-to-digital converter with 12-bit resolution. It offers an accuracy of ±0.5°C (typical) at +25°C and ±3°C (maximum) from +25°C to +100°C. The converter features user-selectable resolution, an operating voltage range of 2.7V to 5.5V, a 2-wire interface, low operating current, and power-saving modes. It is commonly used in personal computers, hard disk drives, entertainment systems, office equipment, data communication equipment, and general-purpose temperature monitoring.

File format: PDF Size:439 KB

The MCP1602 is a high efficient, fully integrated 500 mA synchronous buck regulator with a power-good monitor. It is ideally suited for applications powered from 1-cell Li-Ion or 2-cell/3-cell NiMH/NiCd batteries.

File format: PDF Size:445 KB