MICROCHIP Manuals

The TC7660 is an integrated circuit that uses two external capacitors to convert a +1.5V to +10V input to a corresponding -1.5V to -10V output, replacing the industry standard 7660 charge pump voltage converter.

File format: PDF Size:397 KB

The TC1232 is a fully-integrated processor supervisor that provides three important functions to safeguard processor sanity: precision power on/off reset control, watchdog timer and external reset override. It has an adjustable voltage monitor and watchdog timer, and does not require external components. It ensures that the processor remains in the reset state for 250 milliseconds after a stable system startup. It also monitors the normal operation of the processor and issues a reset signal when the processor is out of control. When the PB input is brought low by an external push button switch or other electronic signal, the outputs of the TC1232 are immediately driven active.

File format: PDF Size:263 KB

This datasheet is for the Microchip PIC18F2480/2580/4480/4580 devices

File format: PDF Size:9285 KB

This document is a data sheet for the PIC16F84A 18-pin Enhanced FLASH/EEPROM 8-bit Microcontroller from Microchip Technology Inc. It describes the features and characteristics of the product.

File format: PDF Size:1496 KB

The MCP6071/2/4 family of operational amplifiers from Microchip Technology Inc. features low input offset voltage, rail-to-rail input and output operation, wide supply voltage range, and other characteristics. They are suitable for automotive, portable instrumentation, sensor conditioning, battery-powered systems, medical instrumentation, test equipment, and analog filters applications.

File format: PDF Size:672 KB

DS35008B is a microcontroller produced by Microchip Technology Inc. It has a high-performance RISC CPU, 35 single-word instructions, 2K x 14 words of program memory, and 128 x 8 bytes of data memory.

File format: PDF Size:2126 KB

The MCP6546/7/8/9 family of comparators offer low quiescent current, open-drain output, wide supply voltage range and more. They are ideal for use in laptop computers, mobile phones, metering systems, hand-held electronics, RC timers, alarm and monitoring circuits, windowed comparators, and multi-vibrators.

File format: PDF Size:1194 KB

The MCP6241/2/4 is an operational amplifier with low quiescent current and can operate from a single supply voltage as low as 1.8V. It supports rail-to-rail input and output swing, and is suitable for automotive, portable equipment, photodiode (transimpedance) amplifier, analog filters, notebooks and PDAs, battery-powered systems, etc.

File format: PDF Size:457 KB

This data sheet introduces the features and characteristics of PIC16C9XX 8-bit CMOS microcontrollers.

File format: PDF Size:1202 KB

This document is a product manual for TC1047/TC1047A, which introduces its features, characteristics and applications.

File format: PDF Size:130 KB

The MCP6L91/1R/2/4 is a low power single/dual/quad operational amplifier from Microchip Technology Inc. with 10MHz gain bandwidth product (GBWP) and low 850µA/amplifier quiescent current.

File format: PDF Size:458 KB

MCP6541/1R/1U/2/3/4 is a comparator with low quiescent current, wide voltage range, and output that can drive heavy loads. It is suitable for laptops, mobile phones, and other devices.

File format: PDF Size:715 KB

This is a data sheet about PIC18F2455/2550/4455/4550 products published by Microchip Technology Inc. in 2004.

File format: PDF Size:7870 KB

The MCP4921/4922 are 2.7 – 5.5V, low-power, low DNL, 12-Bit Digital-to-Analog Con- verters (DACs) with optional 2x buffered output and SPI interface.

File format: PDF Size:3562 KB

This document is the user's guide of Microchip MCP1601 Evaluation Board

File format: PDF Size:226 KB

This manual describes the use of the MCP1650/1/2/3 evaluation board. The evaluation board includes power, MCP1650/1/2/3 controller and peripheral devices, which can be used to evaluate the MCP1650/1/2/3 controller's function.

File format: PDF Size:344 KB

File format: PDF Size:0 KB

This document is a summary of Microchip MCP73831 Evaluation Board User's Guide

File format: PDF Size:765 KB

This is a user guide for the PICkit Serial I2C Demo Board DS51657A.

File format: PDF Size:749 KB

The TC1070, TC1071 and TC1187 are adjustable LDOs designed to supersede a variety of older (bipolar) voltage regulators. Total supply current is typically 50 μA at full load (20 to 60 times lower than in bipolar regulators). The devices’ key features include ultra low-noise operation, very low dropout voltage – typically 85 mV (TC1070); 180 mV (TC1071); and 270 mV (TC1187) at full load, and fast response to step changes in load. Supply current is reduced to 0.5 μA (maximum) when the shutdown input is low. The devices incorporate both over-temperature and over-current protection. Output voltage is programmed with a simple resistor divider from VOUT to ADJ to GND. The TC1070, TC1071 and TC1187 are stable with an output capacitor of only 1 μF and have a maximum output current of 50 mA, 100 mA and 150 mA, respectively. For higher output versions, please see the TC1174 (IOUT).

File format: PDF Size:639 KB