Key facts
- Manuals
- 4
- Languages
- ZH · EN
- Last added
- 2012-01-04
Featured Shanghai科勒电子 manuals
Shanghai KOHLER Electronic technology 8122T-C01 installation Manual
This manual provides step‑by‑step instructions for installing the sensor‑activated urinal accessory (model 1088699‑T01‑B) supplied by Shanghai Koher. It lists all components, shows how to connect the control box, solenoid valve, and sensor, and explains the proper placement of the slurry mold and valve box.
The guide also details battery installation (two AAA alkaline cells), adjustment of flushing volume via a 2.5 mm hex screw, and common troubleshooting steps such as clearing blocked valve cores and cleaning filters. This manual is written in Chinese.
Covers: Parts List · Installation Procedure · Battery Installation · Adjustment and Flushing Volume · Troubleshooting
Kohler 8122T-C01 Urinal Sensor Installation Instructions
The 8122T-C01 is a urinal sensor designed for use with potable water or seawater. It operates on two AAA alkaline batteries and requires a water pressure between 0.18 and 0.55 MPa. The sensor includes a dual‑flush mode and a sensing window that must remain free of reflective objects and strong UV or electromagnetic fields.
The manual lists the recommended tools, shows rough‑in dimensions, and details the installation of the flush valve, battery box, and sensor cover. It also covers adjustment of flushing volume, routine cleaning, troubleshooting steps for battery or pressure issues, and important consumer safety information.
Covers: Installation Instructions · Recommended Tools and Materials · Sensor Specification · Roughing‑in · Installation · Slurry Mold
Shanghai KOHLER Electronic technology K-4736T installation manual
This guide provides step‑by‑step instructions for installing the Kohler 1103349‑T01‑B toilet, including required rough‑in measurements, mounting of the remote controller holder, and fitting of the flushing actuator. It also details power connection and functional testing procedures.
Key sections cover rough‑in spacing, remote holder mounting with 6 mm drill holes deeper than 45 mm, flushing actuator installation with metal chain adjustment, and final trial run using a damp cloth to verify the seat sensor and auto‑flush functions.
Covers: Rough‑in Requirements · Remote Controller Holder Installation · Flushing Actuator Installation · Power Connection and Test · Trial Run
Kohler K-4737T / K-4753T / K-4772T Installation Manual
This guide provides the installation requirements for Kohler electronic toilet seats K-4737T, K-4753T and K-4772T. It includes rough‑in dimensions, recommended ventilation, and safety notes for handling the electronic components.
Key steps cover proper hole spacing, plumbing preparation (flushing new pipes), electrical connection, and powering the seat. The power button on the right side starts the water‑filling cycle, indicated by a flashing LED until the tank is full. This manual is written in Chinese.
Covers: Installation requirements · Rough‑in dimensions · Electrical connection · Plumbing preparation · Power and operation
Latest Shanghai科勒电子 manuals
Shanghai KOHLER Electronic technology 8122T-C01 installation Manual
Installation Guide 9 pages · 3.2 MB · ZHInstallation manual for the Shanghai Koher 1088699-T01-B sensor urinal accessory, covering parts, wiring, battery replacement, and troubleshooting.
Kohler 8122T-C01 Urinal Sensor Installation Instructions
Installation Guide 9 pages · 3.4 MB · ENThis Kohler 8122T-C01 urinal sensor installation guide provides step‑by‑step instructions, required tools, battery setup, and maintenance tips.
Shanghai KOHLER Electronic technology K-4736T installation manual
Installation Guide 18 pages · ENInstallation guide for the Kohler 1103349-T01-B toilet, covering rough‑in dimensions, remote controller holder, flushing actuator and power setup.
Kohler K-4737T / K-4753T / K-4772T Installation Manual
Installation Guide 14 pages · 3.4 MB · ZHInstallation manual for Kohler K-4737T, K-4753T, and K-4772T electronic toilet seats, covering mounting dimensions, wiring, and setup steps.
Which document do I need?
Installation Guide
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in Shanghai科勒电子 manuals
How do I replace the batteries in the sensor unit?
Open the battery box cover, insert two AAA alkaline batteries with correct polarity, and tighten the cover with the screws.
From: Shanghai KOHLER Electronic technology 8122T-C01 installation Manual
What batteries does the sensor use?
The sensor is powered by two AAA alkaline batteries.
From: Kohler 8122T-C01 Urinal Sensor Installation Instructions
What water pressure range is required for proper operation?
The sensor works when the water pressure is between 0.18 MPa and 0.55 MPa.
From: Kohler 8122T-C01 Urinal Sensor Installation Instructions
What are the required rough‑in distances for installing the toilet?
The installation holes must be 136‑140 mm apart, with >20 mm to the tank front rim, 70 mm to the bowl inner rim, and 460‑490 mm to the tank top rim; the bowl inner diameter is 370‑390 mm.
From: Shanghai KOHLER Electronic technology K-4736T installation manual
How should the remote controller holder be mounted?
Select an accessible location, drill two 6 mm diameter holes deeper than 45 mm, insert expansion tubes, fix the holder with screws and double‑sided tape, then attach the remote controller.
From: Shanghai KOHLER Electronic technology K-4736T installation manual
What is the recommended distance between the installation holes?
The holes should be spaced 136‑140 mm apart.
From: Kohler K-4737T / K-4753T / K-4772T Installation Manual