OSRAM Manuals

The SFH 4751 is a red light emitting diode from OSRAM with a power output of 3.1 W. It is used in applications such as lighting, surveillance, data transmission, and traffic monitoring.

The document describes the features and characteristics of the LW A67C Hyper SIDELED® Enhanced optical Power LED (ATON®) lead-free product, including its suitability for light coupling, color coordinates, color temperature, color reproduction index, and viewing angle. The product is suitable for various applications, including backlighting, interior lighting, signal lights, and marker lights.

SFH 2400 SFH 2400FA is a silicon PIN photodiode produced by Siemens. Its characteristics are very short switching time, suitable for 400 to 1100nm applications, suitable for industrial electronics, control and drive circuits and photoelectric switches

LE W E2B, LE W E2A are OSTAR® - Lighting . They have outstanding brightness and luminance, and color temperature is 5600 K. The color reproduction index is 80, and the luminous flux is 16*106 cd/m² (without optic) and 18*106 cd/m² (with optic). They are suitable for general lighting and medical applications.

This document describes the features and characteristics of SFH 3710 NPN-Si Phototransistor, including its small SMT package, adaptation to human eye sensitivity, and applications such as ambient light detection, exposure meter, backlight dimming sensor, etc.

SFH 7221 is a GaAlAs infrared emitter (880 nm) and Si phototransistor, suitable for SMT assembly, emitter and detector can be controlled separately, suitable for IR reflow soldering, applications include data transmission, lock bar and infrared interface.

This product is an optical switch with a working distance of 0.5-4 mm, adjustable working range, extremely low power consumption, very small SMD package, and can be used for position detection.

The QTi 1x35/49/80 QTi 2x35/49 fast electronic ballast has a height of 21 mm, a lamp start time of 1 second, and is suitable for applications with frequent switching cycles. It has a fault cut-off technology, which automatically shuts down the lamp in the event of a fault or at the end of its life. It automatically restarts after lamp replacement. It has a Combi-Wiring (CW) terminal for automatic or manual wiring and is suitable for luminaires with protection class I and II (functional earth connection required). It is also suitable for emergency installations in accordance with VDE 0108.

The SFH 4231 is a high power infrared emitter with features of point light source, high efficiency, small package, maximum DC current of 1A, low thermal resistance, and maximum spectral emission at 940nm. The product can be used for infrared illumination, surveillance systems, IR data transmission, driver assistance systems and machine security applications.

LEW E3A OSTAR® is a lighting fixture with extremely high brightness and luminance due to pure surface emission and low thermal resistance. The color coordinates are x = 0.33, y = 0.33 (white), with a typical color temperature of 5600 K and a color reproduction index of 80. The viewing angle is Lambertian Emitter (120°) and the light emitting surface measures 2.1 mm x 3.2 mm. It utilizes ThInGaN® technology and has a luminance of 16*10^6 cd/m². The maximum optical efficiency is 38 lm/W at 350 mA. The fixture can be mounted using screw holes and solder pads for wire attachment. It has an ESD-withstand voltage of up to 2 kV (JESD22-A114-B). Each box contains 60 pieces. It is suitable for general lighting, medical equipment, microscope lighting, traffic signals, and high-quality flashlights.

LE ATB A2A OSTAR - Projection Lead (Pb) Free Product - RoHS Compliant is a compact lightsource product in multi-chip on board technology, with extremely high brightness and low thermal resistance. The product is prepared for use with additional optics and is suitable for applications such as projectors, medical equipment, microscope illumination, headlights, traffic signs, and high-quality flashlights.

SFH 4258 SFH 4259 are high power infrared LEDs produced by Infineon. They have high output power, typical emission wavelength of 850nm, half angle of ±15° and ±25°, and can withstand high current at high temperature. They can be used in infrared illumination, infrared data transmission and sensorics.

SFH 4252 is a high power infrared emitter with a peak wavelength of 850nm, which is used in infrared illumination, infrared data transmission and other scenes.

SFH 9240/9241 is a photoelectric switch released by Osram, which has a combination of IR-GaAs-emitter and Schmitt-Trigger IC, daylight cut-off filter, typical threshold current of 3mA, electrically isolated emitter and detector, IR-Reflow Löten soldering method, and preconditioning according to JEDEC Level 4 standard. It can be used for optical switch, pulse generator and counter applications.

This is an led light produced by OSTAR®, model LE CW E2A, available in 5 color temperatures, with high luminous efficiency, high brightness and high color rendering index, can be used for lighting, microscope lighting, traffic signs and other scenes