Key facts
- Manuals
- 1
- Languages
- ZH
- Last added
- 2012-02-06
Featured MSS二级清扫器 manuals
Flexco MSS Secondary Sweeper Installation Guide
This guide explains how to install the MSS secondary sweeper on a conveyor system. It starts with mounting the installation base, securing it 25 mm above the belt, and aligning the base with the belt path. The document then details the installation of the fixed rod, tensioning nuts, and the spring‑tension device.
After mechanical assembly, the guide shows how to set the blade angle using the angle gauge, adjust blade tension by compressing the spring, and perform a trial run to verify cleaning performance. Safety notes and troubleshooting tips are included for vibration or insufficient cleaning. This manual is written in Chinese.
Covers: Installation Base Mounting · Fixed Rod Installation · Blade Types and Selection · Spring Tension Device Adjustment · Blade Angle Setting · Tensioning Nut Adjustment
Latest MSS二级清扫器 manuals
Flexco MSS Secondary Sweeper Installation Guide
Installation Guide 2 pages · 219 KB · ZHInstallation guide for the Flexco MSS secondary sweeper, covering base mounting, tensioning, blade adjustment, and startup checks.
Which document do I need?
Installation Guide
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in MSS二级清扫器 manuals
How do I set the blade angle on the MSS secondary sweeper?
Place the blade in the middle of the conveyor, use the angle gauge to rotate the blade upward to the preset angle, and tighten the lock bolts.
How can I adjust the blade tension?
Loosen the upper tension stop nuts, turn the tensioning nuts until the spring is compressed to the required length, then re‑tighten the stop nuts.