LUMBERG Manuals

This document introduces the Lumberg Connect 3G/4G mobile radio network connectors, including connector types, features, application scenarios, etc.

This product is a round connector with screw lock, conforming to DIN 45 321 standard, suitable for GPE application category (-40°C/+ 85°C/≤75% rF), made of PA 6.6 material, the contactor is CuZn, silver-plated and flash-gold-plated, 12-pole version is nickel-plated and 0.8µm gold-plated, the outer casing is zinc die-cast, copper-plated and nickel-plated, the ring nut is CuZn, nickel-plated. The insertion force/contact is <5 N, the pull force/contact is >1.2 N (measured with a polished steel pin, nominal size Ø 1.5 mm), the 12-pole version of the insertion force/contact is <5 N, the pull force/contact is >0.9 N (measured with a polished steel pin, nominal size Ø 1.0 mm), the connection method is welded connection.

This product is a 0304 series connector from Lumberg. It is a front-mounting connector with screw and solder terminals. It has a temperature range of -40°C/+85°C and a pass-through resistance of ≤5 mΩ.

This product is a circular connector that complies with IEC 60130-9 standard, IP68 protection class, with threaded joint and solder terminals, 360 ° shielded.

The document describes the features and characteristics of the 3.5mm JISC 6560 jack connector model KLS 44, including straight version, metal housing, kink protection, and solder terminals.

This document describes the features and characteristics of Lumberg's products, including technical parameters, mechanical data, and electrical data of Kupplung nach IEC 60130-9, IP 40, gerade Ausführung, mit Schraubverschluss und Lötanschlüssen.

This product is a round connector with screw lock and solder terminals, IP68 protection class, 360° shielding.

This document introduces a plug product released by Lumberg in January 2006, which complies with the IEC 60130-9 standard. The product features an IP 40 protection rating, a straight design, screw-locking and solder connections. It has a wide temperature range (-40°C to +85°C) and is made of high-quality materials, including PA GF contact carriers, CuZn contact pins (3 to 8 pins) with silver and gold plating, CuZn contact pins (12 pins) with nickel and gold plating, PC sleeves, CuZn grounding flags with nickel and tin plating, CuZn housings with nickel plating, CuZn knurled screws with nickel plating, TPE strain reliefs, and St nickel-plated cable clamps. The product can be used with various sockets, meets the IP 40 protection rating, and complies with DIN EN 60529 and VDE 0110/IEC 60664 standards.

This is the datasheet for the Lumberg JCBJ11 24 V DC power connector.

KLS 2 is Lumberg's 3.5mm 2-pole mono audio connector with ball head, kink protection and solder connections.

This datasheet contains the specification information of Lumberg 2-pole / mono jack connector, including temperature range, contact material, insulation material, housing material, bend protection material, wiring method, test voltage, insulation resistance, etc

SWUM™ installation plug is an IP 68/67 rated plug with screw fastening, compliant with IEC 61076-2-106 and AISG specifications, used for circuit board connections. The product has the characteristics of high and low temperature resistance, suitable for front and back installation. In terms of materials, the contact carrier is made of PA and CuZn, the housing is made of Zn-die casting, and the sealing ring is made of NBR. The product can be used with Kupplungen according to IEC 61076-2-106 and IEC 60130-9 standards. Electrically, the product has a rated current of 5A, a rated voltage of 60V AC, and an insulation resistance greater than 1 TΩ.

This is a PDF file about circular connectors. The connector complies with IEC 60130-9 standard, has IP 40 protection rating, with threaded joint and soldering terminals. The connector has 3 to 12 pins, with a diameter of 1.0 mm.

This document describes the KLB 3 model of Jack connectors. The connector complies with the JISC 6560 standard and has a 6.35 mm jack diameter. The connector can be mounted on the backside and features 3 poles/stereo jacks and solder eyes. It is suitable for a temperature range of -20°C to +70°C. The materials of the connector include a polycarbonate body, a nickel-plated CuZn contact bush, a nickel-plated Cu alloy solder terminal, a nickel-plated steel washer, and nut. It has an insertion force and withdrawal force of 5-40 N and can withstand more than 5000 mating cycles. The electrical characteristics of the connector include a ≤30 mΩ contact resistance, a rated current of 2 A, a rated voltage of 34 V AC/DC, and a test voltage of 250 V for 60 seconds. It is suitable for mating with KLS 3 and KLS 33 models of jack plugs.