LASCAR Manuals

The EM32-4B-LED is a 4 digit LED data display which is designed to be panel mounted in most low and medium volume applications. The display features 8mm digit height, 3 decimal points and a very low current consumption. This product is designed so no soldering is required. Connection is via 2 rows of square posts for the main functions and the optional external LEDs. The module features a round metal bezel, requiring a 32.5mm (1.28") diameter cut-out. It is secured with the nut provided. Protection from the front to IP 67 / NEMA 4X standards is achieved by placing the rubber seal between the module and panel during assembly. FEATURES: 8mm digit height, decimal points, drives up to 4 external LEDs, metal bezel. TYPICAL APPLICATIONS: Panel mount instrumentation, process & control, automotive.

DPM 3AS-BL 3½ Digit Backlit LCD Voltmeter Module is a low power voltage measurement module with a 200mV DC full scale measurement range, supports auto-zero and auto-polarity, can be user-selected decimal points, LED backlight can ensure excellent readability in low light conditions. The module is easy to install, and the negative rail generator enables the meter to measure a signal referenced to its own power supply GND. The design of the panel meter's housing allows the module to be low cost, which will suit high and low volume applications. The DPM 3AS-BL is intended to replace the DPM 3, DPM 3S, DPM 3-BL and DPM 3S-BL in many applications, usually requiring only minor circuit modifications.

This low-cost sub-miniature LED module is ideally suited for high volume data display applications. It features an exceptionally large display in a miniature package and includes 4 digits and 3 decimal points. The module accepts a clocked serial bitstream which corresponds with the segments to be displayed, and a data enable input to latch the data onto the LEDs and up to 4 external LEDs. The use of low current display technology means this LED product can be considered for battery powered applications. The OEM 4-LED is dimensionally compatible with other displays in the OEM family. Connection to the module is via two rows of pins with a 0.1 inch (x0.5 inch) pitch.

The EMV 1125 is an easy-to-mount LCD digital panel meter. The user need only drill a single 5.5mm hole in the panel. The module is fitted to the panel by locating its screw threaded stud through the hole, fitting the washer and tightening the nut provided. The module's 10 connecting wires pass through the hollow stud into the target application, where they can be easily soldered into place. The module features 200mV full scale input, auto-zero and auto-polarity. A separate screw terminal adaptor board (T/BLK-4) simplifies connection and calibration. A rubber seal is included, providing splashproof protection for the unit when fitted to the meter during installation.

EMT 1900 is an easy-to-mount LCD digital panel meter that can measure ambient temperature and outside temperature. It has a wide temperature range and accuracy, suitable for various applications.

The SP 300-BLUE is a 3.5-digit LED digital voltmeter module produced by Lascar Electronics, with a 200mV DC range, auto-zero and auto-polarity function.

The DPM 2000 is a 3½ digit LCD module that offers a combination of high performance, elegant appearance, and low cost. The module uses a bandgap reference for extra temperature stability. The DPM2000S is a single rail version with a built-in negative rail generator, allowing the meter to measure a signal referenced to its own power supply 0V.

The document introduces a 9 segment LCD color scale auto-zero 1V d.c. full scale reading meter, suitable for panel mounting, no calibration required, splashproof. This product features low cost and compact design, ideal for low or high volume applications. Other voltages and currents can be measured by adding 2 scaling resistors. The meter is suitable for applications where the order of magnitude of the reading is more important than the value of the reading itself, allowing the operator to quickly scan the display and receive visual feedback. Installation is very easy, requiring only a single round hole drilled in the panel.

The DDM 4 is a low-power 4-digit data display module that usually operates under microprocessor control. Inputs are CMOS and TTL compatible. Using three inputs; Clock, Data In and Load, it is possible to individually address each LCD segment, permitting 0 to 9 and A to F to be displayed plus any other combination of the segments.

DPM 342 is a 4-20mA loop powered indicator produced by Depew Electronics, Germany. The indicator has an accurate zero correction function and can display 4-20mA loop current.

This standalone data logger measures and stores up to 16,379 relative humidity and 16,379 temperature readings over 0 to 100%RH and -35 to +80°C (-31 to +176°F) measurement ranges. The user can easily set up the logger and view downloaded data by plugging the module into a PC's USB port and using the supplied software. Relative humidity, temperature and dew point (the temperature at which water vapour present in the air begins to condense) data can then be graphed, printed and exported to other applications. The high contrast LCD can show a variety of temperature and humidity information. At the touch of a button, the user can cycle between the current temperature and humidity, along with the maximum and minimum stored values for temperature and humidity. The data logger is supplied complete with a long-life lithium battery, which can typically allow logging for up to 1 year.

The SP 5-1200-BL is an easy-to-mount LCD digital panel meter with a 4 to 25V measurement range and 100mV resolution and is powered from the signal it is measuring. Only valid readings are displayed; the module indicates "LO" at voltages below 4V and "HI" at voltages above 25V. Screw terminals allow for quick and easy connection. The module is panel mounted using the metal clip provided and a rubber seal is included, providing splashproof protection for the unit when fitted to the meter during installation.

The document introduces a product called DPM 500-BL, which is a backlit digital voltmeter. The product has an accuracy of 0.05% and a sample rate of 3 samples per second. It also features programmable decimal points, auto-zero, and auto-polarity. The dimensions of the product are 60.0mm x 45.0mm, and it is suitable for a supply voltage range of 7.5V to 14V.

This document describes the dimensions, features, and characteristics of the DPM 125 3½ Digit LCD Module. It features selectable logic, selectable decimal points, auto-zero, and auto-polarity. The document also provides the resistor values required to alter the full scale reading of the meter and instructions for panel fitting. This compact LCD DPM is ideally suited for low or high volume applications.

The DPM 1AS-BL is a 200mV dc measurement range of digital panel meter produced by Lascar Electronics. It features auto-zero and auto-polarity. Decimal points are user selectable. LED backlighting ensures excellent readability under low light conditions.