NEC manuals, page 32
NEC ht1000 Proiettore dell intrattenimento Manuale dell utente
HT1000 Entertainment Projector User Manual
NEC ht1000 Unterhaltungs-Projektor Bedienungshandbuch
The HT1000 Entertainment Projector Operation Manual provides safety precautions and instructions for using the NEC HT1000 projector.
NEC ht1000 Projecteur de divertissement Mode d emploi
This is a user manual for the NEC HT1000 projector. It mainly introduces the safety precautions for using the projector and how to use the projector.
NEC ht1000 Entertainment Projector User Manual
NEC ht1100 quick connect guide
NEC ht1100 Manual
This manual introduces the use of NEC HT1100 projector.
NEC ht1100 Guide
This document provides the user manual for the NEC HT1100 projector, including safety precautions and maintenance tips.
NEC SILICON TRANSISTOR KA4xxx handbook
KA4xxx series is NEC's NPN type transistor, with a compact package and built-in resistors, complementary to KN4xxx series.
NEC RD2.0UM RD39UM DATA SHEET
The RD2.0UM to RD39UM series are 2-pin Ultra Super Mini Mold Package zener diodes possessing an allowable power dissipation of 150 mW.
NEC PHOTOCOUPLER PS8502 PS8502L1 PS8502L2 PS8502L3 NEPOC Series HIGH SPEED ANALOG OUTPUT TYPE 8 mm CREEPAGE 8-PIN PHOTOCOUPLER Manual
This datasheet describes the PS8502, PS8502L1, PS8502L2 and PS8502L3 series of NEC Electronics 8-pin high speed photocouplers. The series has a 8mm long creepage distance, high common mode transient suppression, high supply voltage, high response speed and high isolation voltage.
NEC NEPOC Series PHOTOCOUPLER PS2915-1 handbook
PS2915-1 is an optically coupled isolator containing GaAs light emitting diodes and an NPN silicon phototransistor in one package for high density mounting applications. An ultra small flat-lead package has been provided which realizes a reduction in mounting area of about 30% compared with the PS28xx series.
NEC PS8821-1 -2 Manual(1)
The PS8821-1, -2 are optically coupled isolators containing a GaAlAs LED on the light emitting diode (input side) and a PIN photodiode and a high-speed amplifier transistor on the output side on one chip. The PS8821-2 is suitable for high density applications. It features 40% reduction of mounting area (5-pin SOP × 2), low power consumption (VCC = 3.3 V), high isolation voltage (BV = 2 500 Vr.m.s.), high-speed response (tPHL = 0.6 μs MAX., tPLH = 0.9 μs MAX.), and Pb-Free product. It is approved by UL (File No. E72422) and DIN EN60747-5-2 (VDE0884 Part2).
NEC PHOTOCOUPLER PS2805C-1 PS2805C-4 handbook
The PS2805C-1 and PS2805C-4 are optically coupled isolators containing a GaAs light emitting diode and an NPN silicon phototransistor in a plastic SSOP for high density applications to realize an excellent cost performance. This package has shield effect to cut off ambient light.
NEC UPD42S16800L Data Sheet
NEC UPD16878 Data Sheet
The µPD16878 is a monolithic quad H bridge driver IC that employs a CMOS control circuit and a MOS FET output circuit. Because it uses MOS FETs in its output stage, this driver IC consumes less power than conventional driver ICs that use bipolar transistors. Because the µPD16878 controls a motor by inputting serial data, its package has been shrunk and the number of pins reduced. As a result, the performance of the application set can be improved and the size of the set has been reduced. The µPD16878 employs a current-controlled 64-step micro step driving method that drives stepper motor with low vibration. The µPD16878 is housed in a 38-pin plastic shrink SOP to contribute to the miniaturization of the application set. The µPD16878 can simultaneously drive two stepper motors and is ideal for the mechanisms of camcorders.