Linear Technology manuals, page 35
LINEAR 2PB_3675 Configurable 7-Channel High Power PMIC
The document is about LTC3675 power management chip. The chip is a highly integrated general-purpose power management solution for high power single cell lithium-ion/polymer systems. It features seven independent rails plus LED driver, with I2C control, flexible sequencing and fault monitoring in a compact 28mm2 QFN package.
LINEAR 2PB_2990a I 2 C System Monitor
The LTC2990 is a temperature, voltage and current monitor for 3V to 5.5V systems which integrates a 14-bit ADC, 10ppm/°C reference and I2C interface to provide submillivolt voltage resolution, as well as accuracy of ±1°C internally and ±0.5°C remotely when making temperature measurements. Unlike traditional temperature monitors that rely on single-ended inputs for measurements, the LTC2990 uses four differential inputs to measure multiple parameters simultaneously.
LINEAR 2PB_3748 48V No-Opto Isolated Applications
The LT3748 is a high input voltage isolated flyback DC/DC controller that does not require an opto-isolator, third winding or signal transformer for feedback. The output voltage is sensed from the primary-side flyback signal, and is set with two external resistors and the transformer turns ratio. The LT3748 operates over a 5V to 100V input voltage range, drives an external N-channel power MOSFET and maintains better than ±5% overall regulation.
LINEAR 2PB_2379fc 18-Bit 1.6Msps SAR ADC 101dB SNR
The LTC2379-18 is a 18-bit 1.6Msps SAR ADC with 101dB SNR and ±VREF full differential input range. It features a digital gain compression feature that eliminates the need for a negative ADC driver supply while preserving the ADC's full resolution, dramatically lowering the total power consumption of the signal chain.
LINEAR 2PB_6409 Differential Amplifiers High Speed ADC Drivers
This datasheet provides detailed information on Linear Technology's high precision, high speed, low noise differential amplifiers/ADC drivers.
LINEAR 2PB_9004_signalchain RF-to-Digital Module Receivers
The LTM9004 and LTM9005 are highly integrated RF-to-digital receivers that combine direct conversion and IF sampling architectures with integrated RF, signal filtering, gain stages and high-speed ADCs for more compact, low power designs and dramatically faster time-to-market.
LINEAR 2PB_3880f Digital Power System Management
The LTC®3880 is a power system manager featuring a dual output synchronous step-down DC/DC controller with digital telemetry and is fully programmable via an I2C-based PMBus compliant serial interface. This device combines an onboard EEPROM, best in class analog switching regulator performance with precision mixed signal data conversion for ease of power system design.
LINEAR 2PB_osccalcfa Silicon Oscillators
Linear Technology's silicon oscillators offer advantages over traditional crystal-based clocks in systems subject to shock, vibration, acceleration, or temperature extremes. They are made using standard silicon fabrication and assembly techniques, eliminating the need for crystals, timing capacitors, and long lead times. With fast start-up, low power consumption, small size, and on-the-fly frequency programmability, they are suitable for almost any application.
Linear Technology Analog Playground Module for the Freescale Tower System
This document introduces the use of Linear Technology data converters and other mixed signal solutions with the Freescale Tower System. The system features an easy-to-use plug-in analog module that can be controlled by any Freescale Tower processor module with an SPI interface. The QuikEval™ interface on the analog module allows connection of more than 130 Linear Technology evaluation boards for a broad range of applications. The module includes features such as digital-to-analog converters (DACs), analog-to-digital converters (ADCs), voltage regulator, voltage reference, and more.
LINEAR 2PB_2262-14 14-/12-Bit 150Msps 1.8V ADC Family
This datasheet introduces the LTC2256-14/12 family of 14/12-bit, 25Msps to 150Msps ADCs. The family features a single 1.8V supply, flexible digital interface (CMOS, DDR CMOS, or DDR LVDS), selectable input ranges (1VP-P to 2VP-P), 800MHz full-power bandwidth S/H, optional data output randomizer, alternate bit polarity mode, optional clock duty cycle stabilizer, shutdown and nap modes, and serial SPI port for configuration.
LINEAR 2PB_ Energy Harvesting
LINEAR 2PB_3833 Constant On-Time High Step-Down Controllers
The LTC®3833 is a high step-down DC/DC buck controller that operates up to 2MHz and provides a tightly regulated output. It is ideal for automotive applications where high switching frequencies are required to prevent interference to noise-sensitive circuitry.
LINEAR LTPoE__ PSEs - Flyer LTPoE++ PSE Controllers
LINEAR 2PB_4000 60V 20A+ Battery Charging Controller
The LTC®4000 is a high voltage controller and power manager which, when paired with a DC/DC converter, becomes a full-featured battery charger solution. The LTC4000 is capable of driving virtually any topology, including buck, boost, buck-boost, SEPIC and flyback converters. Its intelligent PowerPath manager provides power to the system load when input power is available, enabling instant-on operation even with a deeply discharged battery. A full-featured controller, the LTC4000 can charge a variety of battery types including lithium, nickel and lead acid-based chemistries. Highly accurate charge current and float voltage, as well as onboard termination, ensure safe and accurate charging.
LINEAR 2PB_4071 Li-Ion/Polymer Shunt Battery Charger System with Low Battery Disconnect
The LTC®4071 is an easy-to-use, tiny shunt battery system for Li-Ion/Polymer batteries, which integrates a charger and battery pack protection in one IC. The LTC4071, with its 550nA operating current, charges and protects batteries at up to 50mA from previously unusable very low current, intermittent or continuous charging sources. A near zero current (<0.1nA) low battery latching disconnect function protects even low capacity batteries from deep discharge and potentially irreparable damage. Housed in a low profile (0.75mm) 8-lead 2mm × 3mm DFN package, the LTC4071 provides the only complete and ultracompact battery charger and protection solution operating with low level power sources such as energy scavenging/ harvesting, resistive isolation or solar-powered systems. It can charge Li-Ion/Polymer, coin cell and thin film batteries.