ON Manuals

This document is about MCR08BT1/D MCR08B, MCR08M sensitive gate silicon controlled rectifiers. These products are designed for line powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits. The product features are sensitive gate trigger current, blocking voltage up to 600V, glass passivated surface for reliability and uniformity, surface mount package, and lead-free packages are available.

This article introduces the application of analog switches in cell phones. It describes the development history of analog switches since the 1960s, and focuses on ON Semiconductor's MC74VHC1G66DFT2 product, which is a low voltage, single switch (SPST) analog switch with a small size and features low resistance and high impedance.

This is an instruction manual for OS ROTARY ENGINE 49PI engine

This document is about the user manual of CS8191 chip. The chip can be used to measure vehicle speed or engine RPM, and it has higher output torque and better output signal symmetry than other competitive parts (CS289, and LM1819). It is protected against short circuit and overvoltage (60 V) fault conditions.

The CS8190 is specifically designed for use with air–core meter movements. The IC provides all the functions necessary for an analog tachometer or speedometer. The CS8190 takes a speed sensor input and generates sine and cosine related output signals to differentially drive an air–core meter. Many enhancements have been added over industry standard tachometer drivers such as the CS289 or LM1819. The output utilizes differential drivers which eliminates the need for a zener reference and offers more torque. The device withstands 60 V transients which decreases the protection circuitry required. The device is also more precise than existing devices allowing for fewer trims and for use in a speedometer.

This document introduces the features and characteristics of CS8183 dual micropower 200 mA low dropout tracking regulator/line driver

The CS8182 is a monolithic integrated low dropout tracking regulator designed to provide adjustable buffered output voltage that closely tracks (±10 mV) the reference input. The output delivers up to 200 mA while being able to be configured higher, lower or equal to the reference voltages. The output has been designed to operate over a wide range (2.8 V to 45 V) while still maintaining excellent DC characteristics. The CS8182 is protected from reverse battery, short circuit and thermal runaway conditions. The device also can withstand 45 V load dump transients and −50 V reverse polarity input voltage transients. This makes it suitable for use in automotive environments. The VREF/ENABLE lead serves two purposes. It is used to provide the input voltage as a reference for the output and it also can be pulled low to place the device in sleep mode where it nominally draws less than 30μA from the supply.

The CS8129 is a 5.0V precision linear regulator capable of sourcing 750mA. The RESET threshold voltage has been lowered to 4.2V so that the regulator can be used with 4.0V microprocessors. The lower RESET threshold also permits operation under low battery conditions (5.5V plus a diode). RESET's delay time is externally programmed using a discrete RC network. During powerup, or when the output goes out of regulation, RESET remains in the low state for the duration of the delay. This function is independent of the input voltage and will function correctly as long as the output voltage remains at or above 1.0V. Hysteresis is included in the Delay and the RESET comparators to improve noise immunity. A latching discharge circuit is used to discharge the delay capacitor when it is triggered by a brief fault condition. The regulator is protected against a variety of fault conditions: i.e. reverse battery, overvoltage, short circuit and thermal runaway conditions. The regulator is protected against voltage transients ranging from -50V to +40V. Short circuit current is limited to 1.2A (typ). The CS8129 is packaged in a 5 lead TO-220 and a 16 lead surface mount package.

The document introduces the characteristics of the MBR120ESFT1/D Schottky power diode.

The document introduces a plastic SOD-123 package with a large area metal-to-silicon power diode using the Schottky Barrier principle. The product is ideally suited for low voltage, high frequency rectification, free wheeling, and polarity protection diodes, especially in surface mount applications where compact size and weight are critical to the system. The product features low forward voltage, 125°C operating junction temperature, excellent ESD ratings, and other characteristics.

MBR120VLSFT1/D is a Schottky power rectifier using the Schottky Barrier principle with a large area metal-to-silicon power diode.

This datasheet introduces the features and characteristics of MBR0540T1/D Surface Mount Schottky Power Rectifier SOD−123 Power Surface Mount Package, including application scenarios, pin definitions, and package dimensions.

The NCP1402 series are monolithic micropower step-up DC to DC converters that are specially designed for powering portable equipment from one or two cell battery packs. These devices are designed to start-up with a cell voltage of 0.8 V and operate down to less than 0.3 V. With only three external components, this series allow a simple means to implement highly efficient converters that are capable of up to 200 mA of output current at Vin = 2.0 V, VOUT = 3.0 V. Each device consists of an on-chip PFM (Pulse Frequency Modulation) oscillator, PFM controller, PFM comparator, soft-start, voltage reference, feedback resistors, driver, and power MOSFET switch with current limit protection. Additionally, a chip enable feature is provided to power down the converter for extended battery life. The NCP1402 device series are available in the Thin SOT-23-5 package with five standard regulated output voltages. Additional voltages that range from 1.8 V to 5.0 V in 100 mV steps can be manufactured.

This is a 5.0V precision micropower voltage regulator with 150mA output current capability. The output voltage accuracy is ±2.0% with a maximum dropout voltage of 0.6V at 150mA. It can output 150mA current and is especially suitable for any battery-powered microprocessor equipment. Microprocessor control logic includes an active RESET (with DELAY) and a FLAG monitor that can be used to provide an early warning signal to the microprocessor of a potential impending RESET signal. The use of the FLAG monitor allows the microprocessor to finish any signal processing before the RESET shuts the microprocessor down. The active RESET circuit operates correctly at an output voltage as low as 1.0V. The RESET function is activated during the power up sequence or during normal operation if the output voltage drops outside the regulation limits. The reset threshold voltage can be decreased by the connection of an external resistor divider to RADJ lead. The regulator is protected against reverse battery, short circuit, and thermal overload conditions. The device can withstand load dump transients making it suitable for use in automotive environments. The device has also been optimized for EMC conditions.

RB751V40T1/D is a Schottky barrier diode produced by ON Semiconductor. It features extremely low forward voltage and extremely fast switching speed, making it ideal for high-frequency switching applications, circuit protection and voltage clamping.