ST Manuals (Others)

This document describes the parameter values and characteristics of the T405Q-600 series 4-quadrant sensitive TRIACs, mainly used for general-purpose applications requiring high surge current capability, such as irrigation systems.

File format: PDF Size:67 KB

ST STP7NK40Z series high voltage MOSFETs, rated voltage 400V, rated current 5.4A, minimum on-resistance 0.85Ω, high operating frequency, suitable for switching power supplies, adapters, PFC and other applications.

File format: PDF Size:1170 KB

The STB30NF10 is a N-channel 100V - 0.038 Ω - 35A TO-220/TO-220FP/D2PAK low gate charge STripFET™ II power MOSFET with typical RDS(on) = 0.038 Ω, exceptional dv/dt capability, 100% avalanche tested and application oriented characterization. It is suitable for high efficiency DC-DC converters and UPS and motor control applications.

File format: PDF Size:456 KB

This file is the M74HC367 datasheet

File format: PDF Size:239 KB

This document describes the features and characteristics of the M28W640FCT and M28W640FCB, two models of 64 Mbit flash memory products.

File format: PDF Size:1142 KB

STC03DE220HV is a high voltage ESBT switch transistor for three phase application, featuring low on resistance, very fast switching and low CISS.

File format: PDF Size:244 KB

The M29F080D 8 Mbit (1Mb x8, Uniform Block) 5V Supply Flash Memory is a product of Macronix, which has the following features: the supply voltage is 5V ±10%, the read and write operation voltage range is 5V, the access time is 55, 70, 90ns, the programming time is 10µs, there are 16 64Kbyte memory blocks, there are embedded byte programming algorithms, it supports erase suspend and resume modes, it supports unlock bypass programming command, it supports temporary block unprotection mode, it supports common flash interface, it has 64 bit security code, it has low power consumption, it supports standby and automatic standby, it supports 100,000 programming/erase cycles, the electronic signature includes manufacturer code and device code.

File format: PDF Size:606 KB

This document describes the features and characteristics of the uPSD3234A and uPSD3234BV Flash Programmable System Devices. These devices feature a fast 8-bit 8032 microcontroller core, dual flash memories with memory management, clock, reset, and supply management, programmable logic, communication interfaces, A/D converter, timers, and interrupts.

File format: PDF Size:2718 KB

The TDA2050 is an audio class AB audio amplifier produced by Texas Instruments. The chip uses Pentawatt packaging, has high output power (50W music power IEC 268.3 rules), high operating voltage (50V), single or split power supply operations, very low distortion, short circuit protection (output to GND) and thermal shutdown function.

File format: PDF Size:190 KB

TDA2050 is a high-power audio amplifier sold by Dinghao Electronics. It has a rated output power of 50W, a wide operating voltage range, supports single or dual power supply, low distortion, and has short circuit protection and thermal shutdown functions.

File format: PDF Size:190 KB

This document describes the features and characteristics of the BTA12, BTB12, and T12xx series triacs, including medium current, low thermal resistance, high commutation capability, and insulation ceramic. These triacs are suitable for applications such as static relays, light dimmers, and appliance motors speed controllers.

File format: PDF Size:126 KB

This document describes the features and characteristics of LM124W-LM224W-LM324W low power quad operational amplifiers, including wide gain bandwidth, input common-mode voltage range, large voltage gain, low supply current, and wide power supply range.

File format: PDF Size:792 KB

The STP6NB90/STP6NB90FP is an advanced family of power MOSFETs from STMicroelectronics with outstanding performances, featuring a typical RDS(on) = 1.7 ohm, exceptional avalanche and dv/dt capabilities and unrivalled gate charge and switching characteristics. Applications include high current, high speed switching, switch mode power supplies (SMPS), DC-AC converters for welding equipment and uninterruptible power supplies and motor drive.

File format: PDF Size:124 KB

STP6NB80 is a N-channel power MOSFET produced by STMicroelectronics. Its maximum on-resistance is 1.6 ohms, maximum voltage is 800V, and maximum current is 5.7A. It is used in high-frequency high-voltage switching, SMPS, DC-AC converters, welding equipment and UPS.

File format: PDF Size:75 KB

File format: PDF Size:75 KB

STP6NB50/STP6NB50FP are N-channel enhancement mode MOSFETs from SGS-Thomson, which uses Mesh Overlay process and has extremely low on-resistance, high dv/dt capability, very low intrinsic capacitances and minimized gate charge, suitable for high current, high speed switching applications such as switch mode power supplies, welding equipment and motor drive

File format: PDF Size:137 KB

This document describes the features and characteristics of the STP6NB50 and STP6NB50FP N - CHANNEL ENHANCEMENT MODE PowerMESH MOSFETs, including low RDS(on), extremely high dv/dt capability, 100% avalanche tested, very low intrinsic capacitances, and minimized gate charge.

File format: PDF Size:137 KB

This document describes the features and performance of the power MOSFET products, STP6NB25 and STP6NB25FP, produced by STMicroelectronics. These products utilize the latest high voltage MESH OVERLAY process and offer extremely high dv/dt capability, 100% avalanche tested, very low intrinsic capacitances, and minimized gate charge. They are suitable for high current, high speed switching, UPS, DC-DC & DC-AC converters for telecom, industrial, and consumer environments.

File format: PDF Size:141 KB

STP6NB25 is a N-channel MOSFET produced by STMicroelectronics. Its feature is that RDS(on) is only 0.9 ohms, dv/dt capability is extremely high, and it can be used for high current, high frequency switching applications, such as UPS power supplies, DC-DC&DC-AC converters.

File format: PDF Size:141 KB

This datasheet presents the characteristics of the STB75NF75, STP75NF75 and STP75NF75FP N-channel power MOSFET series manufactured with STMicroelectronics unique STripFET™ process. This series is designed to minimize input capacitance and gate charge, making it suitable for use as primary switch in advanced high-efficiency, high-frequency isolated DC-DC converters for Telecom and Computer applications. It is also intended for any applications with low gate drive requirements.

File format: PDF Size:410 KB