ST Manuals (Others)

ST TL1431 Manual

TL1431 is a programmable shunt voltage reference with guaranteed temperature stability over the entire temperature range of operation. The output voltage may be set to any value between 2.5V and 36V with two external resistors. The TL1431 operates with a wide current range from 1 to 100mA with a typical dynamic impedance of 0.2Ω.

File format: PDF Size:155 KB

ST TS912 Manual

File format: PDF Size:0 KB

ST STPS41L30CG/CT/CR Manual

The STPS41L30CG/CT/CR is a low voltage, low drop power Schottky rectifier from Texas Instruments. This device is intended for use in low voltage, high frequency inverters, free-wheeling and polarity protection applications. It features very small conduction losses, negligible switching losses, extremely fast switching, low forward voltage drop, high avalanche capability, low thermal resistance and avalanche capability.

File format: PDF Size:100 KB

ST STTH1302CT/CG/CFP Manual

STTH1302CT/CG/CFP is a high-efficiency ultrafast diode from ST. It has a maximum average forward current of 6.5 A, a reverse peak voltage of 200 V, a maximum forward voltage drop of 0.95 V, and a maximum reverse recovery time of 25 ns. The diode features low losses, low forward and reverse recovery times, high surge current capability, high junction temperature, and insulated packaging. It is suitable for use in switch mode power supplies, high frequency DC to DC converters, and other applications.

File format: PDF Size:113 KB

ST STPS10150CT/CG Manual

STPS10150CT/CG is a high voltage and high current Schottky rectifier produced by STMicroelectronics. It has excellent performance and is widely used in high frequency switched mode power supplies.

File format: PDF Size:85 KB

ST M41ST84Y M41ST84W Manual

This document introduces the features and characteristics of the M41ST84Y and M41ST84W, 5.0 or 3.0V, 512 bit (64 x8) serial RTC products.

File format: PDF Size:508 KB

ST STS11NF30L Manual

sts11nf30l is a low voltage, high current n-channel mosfet released by stmicroelectronics. the rated on-resistance is less than 0.01 ohms, the rated voltage is 30v, and the rated current is 11a. it is packaged in so-8.

File format: PDF Size:330 KB

ST STTH8R06 Manual

This document describes the features and benefits of the STTH8R06 series ultrafast high voltage rectifiers, including ultrafast switching, low reverse recovery current, and low thermal resistance.

File format: PDF Size:123 KB

ST L6234 Manual

L6234 three-phase motor driver, supply voltage from 7 to 52 V, peak current 5 A, RDS ON 0.3 Ω typical value at 25 °C, cross conduction protection, TTL compatible driver, operating frequency up to 50 kHz, thermal shutdown, intrinsic fast freewheeling diodes, input and enable function for each half bridge, 10 V external reference available

File format: PDF Size:468 KB

ST BTB04-600SL Manual

BTB04-600SL is a 4A TRIAC from ST Microelectronics with a rated current of 4A and a voltage rating of 600V. This TRIAC features a high surge current capability and is suitable for applications such as lighting, corded power tools, and industrial.

File format: PDF Size:58 KB

ST STTH2003CT/CG/CF/CR/CFP Manual

STTH2003CT/CG/CF/CR/CFP is ST's dual center tap fast recovery epitaxial diodes suitable for switch mode power supply and high frequency DC/DC converters. This device is packaged in TO-220AB, ISOWATT220AB, TO-220FPAB, I2PAK or D2PAK, and is especially intended for secondary rectification.

File format: PDF Size:133 KB

ST M74HCT138 Manual

This document describes the features and characteristics of the M74HCT138 model, including high speed, low power dissipation, compatibility with TTL outputs, etc.

File format: PDF Size:276 KB

ST HCF4007UB Manual

HCF4007UB is a bipolar symmetric output switch, which can be used in various circuits.

File format: PDF Size:123 KB

ST M27C512 Manual

M27C512 512 Kbit (64K x8) UV EPROM and OTP EPROM features: 5V ± 10% supply voltage in read operation, access time of 45ns in read operation, low power “CMOS” consumption power, active current 30mA, standby current 100µA, programming voltage of 12.75V ± 0.25V, programming times of around 6 seconds, electronic signature manufacturer code is 20h, device code is 3Dh, and packages are FDIP28W (F), PDIP28 (B), PLCC32 (C), and TSOP28 (N).

File format: PDF Size:140 KB

ST STP16CP05 Manual

STP16CP05 is a low voltage 16-bit constant current LED sink driver from ST. It has features like low voltage power supply, 16 channels of constant current output, adjustable output current, can be driven by a 3.3V microcontroller, output current range 5-100mA, max clock frequency 30MHz, ESD protection 2.5kV HBM, 200V MM.

File format: PDF Size:565 KB

ST L78M00AB/AC Manual

The L78M00AB series is a three-terminal positive regulator that provides local card regulation, eliminating the distribution problems associated with single-point regulation. Each type employs internal current limiting, thermal shut-down and safe area protection, making it essentially indestructible. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents.

File format: PDF Size:1476 KB

ST M29W320ET M29W320EB Manual

Introduced the features and characteristics of M29W320ET, M29W320EB 32 Mbit (4Mb x8 or 2Mb x16, Boot Block) 3V Supply Flash Memory, including the supply voltage, access time, programming time, memory blocks, erase suspend and resume modes, unlock bypass programming command, VPP/WP pin, temporary block unprotected mode, common flash interface, extended memory block, low power consumption, programming/erase cycles and electronic signature.

File format: PDF Size:888 KB

ST STD5NM50 STD5NM50 Manual

The STD5NM50 is a member of the MDmesh™ family of products. It offers outstanding low on-resistance, impressively high dv/dt and excellent avalanche characteristics. This product is suitable for increasing power density of high voltage converters, allowing system miniaturization and higher efficiencies.

File format: PDF Size:345 KB

ST ULQ2801A ULQ2804A ULQ2805A ULQ2802A ULQ2803A Manual

This file is the datasheet of ULQ2801A-ULQ2805A series, which contains the features, characteristics, pin diagram and other information of the series.

File format: PDF Size:983 KB

Brands



Products