Philips Manuals (Others)

The PHK4NQ20T is an N-channel enhancement mode field-effect transistor manufactured by Philips Semiconductors. It is packaged in a SOT96-1 (SO8) form, with low on-state resistance, surface mount, etc. It is suitable for DC-DC primary side switching and general purpose switch applications.

File format: PDF Size:234 KB

The TJA1050 is a high speed differential CAN transceiver for connecting to automotive buses. It features low EMI, high EMI immunity and differential receiver.

File format: PDF Size:118 KB

The 74ABT125 is a quad buffer produced by PHILIPS with a 3-state output interface, high output drive capability and low power consumption. This product is ideal for driving bus lines and can disable inputs in 3-state mode.

File format: PDF Size:94 KB

The HEF4052B is a dual 4-channel analogue multiplexer/demultiplexer with common channel select logic. Each multiplexer/demultiplexer has four independent inputs/outputs (Y0 to Y3) and a common input/output (Z). The common channel select logic includes two address inputs (A0 and A1) and an active LOW enable input (E). Both multiplexers/demultiplexers contain four bidirectional analogue switches, each with one side connected to an independent input/output (Y0 to Y3) and the other side connected to a common input/output (Z). With E LOW, one of the four switches is selected (low impedance ON-state) by A0 and A1. With E HIGH, all switches are in the high impedance OFF-state, independent of A0 and A1. VDD and VSS are the supply voltage connections for the digital control inputs (A0, A1 and E). The VDD to VSS range is 3 to 15 V. The analogue inputs/outputs (Y0 to Y3, and Z) can swing between VDD as a positive limit and VEE as a negative limit. VDD − VEE may not exceed 15 V.

File format: PDF Size:118 KB

PMWD15UN Dual N-channel µTrenchMOS™ ultra low level FET is a surface mount low power dual diode produced by Philips Semiconductors. This device has low voltage, low power, low threshold and fast switching characteristics. It is suitable for applications such as portable appliances, PCMCIA cards, battery management and load switching.

File format: PDF Size:92 KB

80C51/87C51/80C31 80C51 8-bit microcontroller family 4K/128 OTP/ROM/ROMless low voltage (2.7V–5.5V), low power, high speed (33 MHz) Product specification

File format: PDF Size:364 KB

This datasheet provides detailed information on the PHILIPS PCF8593 low-power clock/calendar. The chip uses the I2C bus and has low power consumption, high precision, and multiple functions, making it suitable for use in various low-power electronic devices.

File format: PDF Size:140 KB

PMBTA42 is a high-voltage NPN transistor with low current (max. 100 mA) and high voltage (max. 300 V). It is used in telephony and professional communication equipment.

File format: PDF Size:51 KB

PMV45EN µTrenchMOS™ enhanced logic level FET is an N-channel enhancement mode field-effect transistor using TrenchMOS™ technology. The product is available in SOT23 package and can be used for surface mount package, fast switching, battery management, high speed switch, etc.

File format: PDF Size:239 KB

The 74HC/HCT4066 are high-speed Si-gate CMOS devices and are pin compatible with the “4066” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4066 have four independent analog switches. Each switch has two input/output terminals (nY, nZ) and an active HIGH enable input (nE). When nE is LOW the belonging analog switch is turned off.

File format: PDF Size:140 KB

The 74HC21 is a high-speed dual 4-input AND gate. It features low power dissipation, compliance with JEDEC standard 7A, strong ESD protection and a wide temperature range.

File format: PDF Size:83 KB

PH3830L N-channel TrenchMOS™ logic level FET is a N-channel enhancement mode field-effect power transistor manufactured by Philips Semiconductors. It is packaged in SOT669 (LFPAK) with low thermal resistance, SO8 equivalent area footprint, logic level gate drive, and low on-state resistance. It is used in DC-to-DC converters, switched-mode power supplies, portable appliances, and notebook computers.

File format: PDF Size:93 KB

PHK5NQ15T is a N-channel enhancement mode field effect transistor produced by Philips Semiconductors. It features low on-state resistance and is suitable for DC-DC primary side switching and general purpose switching.

File format: PDF Size:236 KB

This document describes the features and characteristics of the PDTC114ET NPN resistor-equipped transistor. The transistor has built-in bias resistors, which simplifies circuit design and reduces the number of components and board space. It is especially suitable for space reduction in interface and driver circuits, as well as inverter circuit configurations without the use of external resistors.

File format: PDF Size:57 KB

This data sheet details the features and characteristics of the PCF8582C-2, including non-volatile storage, low power CMOS, single supply, and serial I2C-bus interface

File format: PDF Size:121 KB

The PCA82C250 is a high-performance CAN controller interface that supports the ISO 11898 standard and has a maximum transmission speed of 1Mbit/s. The product has transient protection, EMI interference protection, short-circuit protection, low power consumption and other features, and is widely used in automotive and other high-end fields.

File format: PDF Size:107 KB

The LPC2104/2105/2106 are single-chip 32-bit microcontrollers based on a 16/32 bit ARM7TDMI-S™ CPU with real-time emulation and embedded trace support, along with 128 kB of embedded high-speed flash memory. They feature a 128-bit wide memory interface and a unique accelerator architecture that enables 32-bit code execution at the maximum clock rate. For applications where critical code size is important, the alternative 16-bit Thumb™ Mode reduces code size by more than 30% with minimal performance impact. These microcontrollers are ideal for applications that require miniaturization, such as access control and point-of-sale, due to their small size and low power consumption. With a wide range of serial communications interfaces and on-chip SRAM options up to 64 kB, they are well-suited for communication gateways and protocol converters, soft modems, voice recognition, and low-end imaging, providing both large buffer size and high processing power. They also feature various 32-bit timers, PWM channels, and 32 GPIO lines, making them particularly suitable for industrial control and medical systems.

File format: PDF Size:156 KB

The PCF8574 is a remote 8-bit I/O expander for the I2C bus. It features low standby current consumption, compatibility with most microcontrollers, latched outputs with high current drive capability, etc.

File format: PDF Size:127 KB

PHP/PHB/PHD71NQ03LT is a N-channel enhancement mode MOSFET product launched by Philips Semiconductors, using TrenchMOS™ technology, with logic level compatibility, low gate charge, large current, high power and other features, widely used in DC-DC converters, switch power supplies and other fields.

File format: PDF Size:266 KB

74AHC1G08/74AHCT1G08 is a high-speed Si-gate CMOS device, implementing 2-input AND logic

File format: PDF Size:67 KB